EB51F3 Series EB51F3 • Temperature Compensated Crystal Oscillator (TCXO) • TTL/HCMOS Output • 5.0V Supply Voltage • Stability to ±1.5ppm • External voltage control option available H 4.8 L 18.3 W 11.7 OSCILLATOR NOTES __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range Operating Temperature Range Storage Temperature Range Supply Voltage (VDD) Input Current Frequency Stability Aging (at 25°C) Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise Time / Fall Time Duty Cycle Load Drive Capability Internal Trim (Top of Can) Control Voltage (External) Frequency Deviation Input Impedance Modulation Bandwidth Typical Phase Noise vs. Operating Temperature Range vs. Input Voltage (VDD ±5%) vs. Load (±2pF) w/TTL Load w/HCMOS Load w/TTL Load w/HCMOS Load 0.4VDC to 2.4VDC w/TTL Load or 20% to 80% of Waveform w/HCMOS Load at 1.4VDC w/TTL Load or at 50% of Waveform w/HCMOS Load Referenced to FO at VC = 2.5VDC; VDD = 5.0VDC Measured at -3dB, VC = 2.5VDC at 10Hz Offset at 100Hz Offset at 1kHz Offset at 10kHz Offset at 100kHz Offset 1.544MHz to 44.736MHz See Table 1 -40°C to 85°C 5.0VDC ±5% 30mA Maximum See Table 1 ±0.3ppm Maximum ±0.2ppm Maximum ±1ppm / year Maximum 2.4VDC Minimum VDD - 0.5VDC Minimum 0.4VDC Maximum 0.5VDC Maximum 10 nSeconds Maximum 50 ±10(%) 10TTL Load 15pF HCMOS Load Maximum ±3ppm Minimum 2.5VDC ±2.0VDC , Positive Transfer Characteristic ±7ppm Minimum, ±20ppm Maximum 10kOhms Typical 10kHz Minimum -70dBc/Hz -100dBc/Hz -130dBc/Hz -140dBc/Hz -145dBc/Hz MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EB51F3 14-PIN DIP 5.0V OS1V 10/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EB51F3 A 15 V - 12.800M OPERATING TEMP. RANGE One Letter Code Per Table 1 FREQUENCY EXTERNAL TRIM N=None (No Connection on Pin 1) V=Voltage Control on Pin 1 FREQUENCY STABILITY Two Digit Code Per Table 1 NOTES __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS Pin 1: Voltage Control or No Connect Pin 2: Case Ground Pin 3: Output Pin 4: Supply Voltage MARKING SPECIFICATIONS Line 1: ECLIPTEK ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Characteristic Fine Leak Test Gross Leak Test Lead Integrity Mechanical Shock Resistance to Soldering Heat Resistance to Solvents Solderability Temperature Cycling Vibration Specification MIL-STD-883, Method 1014, Condition A (Internal Crystal Only) MIL-STD-883, Method 1014, Condition C (Internal Crystal Only) MIL-STD-883, Method 2004 MIL-STD-202, Method 213 Condition C MIL-STD-202, Method 210 MIL-STD-202, Method 215 MIL-STD-883, Method 2003 MIL-STD-883, Method 1010 MIL-STD-883, Method 2007 Condition A Line 2: XX.XXX M M=MHz Frequency (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EB51F3 14 pin DIP 5.0V OS1V 10/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.