SAW Components Preliminary Data B4049 SAW Components B4049 1240,0 MHz Low-Loss Filter for Mobile Communication Preliminary Data Ceramic package DCC6C Features ■ ■ ■ ■ Low-loss RF filter for WLAN IF Low amplitude ripple Usable passband 20 MHz Ceramic package for Surface Mounted Technology (SMT) Terminals ■ Ni , gold-plated Dimensions in mm, approx. weight 0,037 g Pin configuration 2 5 1, 3, 4, 6 1, 3, 4, 6 Type Input Output To be grounded Case ground Ordering code Marking and Package according to C61157-A7-A67 B4049 Electrostatic Sensitive Device (ESD) Maximum ratings Operable temperature range Storage temperature range DC voltage Input power max. T Tstg VDC PIN 0 / + 55 – 40 / + 85 0 0 2 ˚C ˚C V dBm Apr 04, 2000 Packing according to F61074-V8088-Z000 SAW Components B4049 1240,0 MHz Low-Loss Filter for Mobile Communication Preliminary Data Characteristics T = 0 to +55 ˚C ZS = 50 Ω ZL = 50 Ω Operating temperature range: Terminating source impedance: Terminating load impedance: Center frequency fC Maximum insertion attenuation 1230,0 ...1250,0 αmax Amplitude ripple (p-p) 1230,0 ...1250,0 MHz typ. max. — 1240,0 — — 2,9 4,0 dB — 0,6 1,5 dB MHz ∆α MHz αrel Attenuation (relative to αmax) 0,0 1150,0 1200,0 1268,0 1500,0 2500,0 min. ...1150,0 ...1200,0 ...1212,0 ...1500,0 ... 2500,0 ... 4000,0 MHz MHz MHz MHz MHz MHz 3 40 35 27 24 40 17 Apr 04, 2000 53 39 30 27 46 21 — — — — — — dB dB dB dB dB dB SAW Components B4049 1240,0 MHz Low-Loss Filter for Mobile Communication Preliminary Data Transfer function (normalized) Transfer function (passband) 4 Apr 04, 2000 SAW Components B4049 1240,0 MHz Low-Loss Filter for Mobile Communication Preliminary Data Transfer function (wideband, normalized) 5 Apr 04, 2000 SAW Components B4049 1240,0 MHz Low-Loss Filter for Mobile Communication Preliminary Data Published by EPCOS AG Surface Acoustic Wave Components Division, OFW E MF P.O. Box 80 17 09, D-81617 München EPCOS AG 1999. All Rights Reserved. As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. For questions on technology, prices and delivery please contact the sales offices of EPCOS AG or the international representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our sales offices. 6 Apr 04, 2000