EPCOS B41112B3336M000

Aluminum electrolytic capacitors
Alu-X product lines
SMD capacitors
Series/Type:
Data
Sheet
Date:
B41112
April 2008
© EPCOS AG 2008. Reproduction, publication and dissemination of this publication and the information contained therein without EPCOS’ prior express consent is prohibited.
SMD capacitors
Standard series – 85 °C
B41112
General-purpose grade capacitors
Applications
■ For general-purpose applications in the entertainment industry
Features
■
■
■
■
Miniaturized dimensions
RoHS-compatible
Load life of 2000 h at 85 °C
Suitable for reflow soldering
Construction
■ Surface mounting device
■ Minus pole marking on the case
Delivery mode
■ Taped and reeled
Specifications and characteristics in brief
Rated voltage VR
4 … 100 V DC
Operating temperature range
–40 °C … +85 °C
Rated capacitance CR
(20 °C, 120 Hz)
0.1 … 1500 µF
Capacitance tolerance
±20%
Load life
(85 °C, VR)
2000 h
Leakage current Ileak
(20 °C, after 2 minutes)
CR VR
I leak ≤ 0.01 µA ⋅ ⎛ ------- ⋅ -------⎞ or 3 µA, whichever is greater
⎝ µF V ⎠
Low temperature stability
(impedance ratio)
(120 Hz)
M
Requirements:
∆C/C ≤ ±20% of initial value
(4 V: within ±25% of the initial value)
tan δ ≤ 2 times initial specified limit
Ileak ≤ initial specified limit
VR (V DC)
10
16
25
35
50
63
100
Z ( – 25 °C ) <∅8
--------------------------Z ( +20 °C ) ≥∅8
7
4 6.3
4
3
2
2
2
2
2
2
7
5
4
3
2
2
2
2
2
Z ( – 40 °C ) <∅8
--------------------------Z ( +20 °C ) ≥∅8
15
8
8
4
4
3
3
3
3
15
10
8
6
4
3
3
3
3
Shelf life
After storage for 1000 h at 85 °C, the capacitors shall meet the
requirement of load life test after reforming process. After test: VR
to be applied for 30 minutes, 24 to 48 hours before measurement.
Frequency multiplier
for rated ripple current
50 Hz
120 Hz
300 Hz
1 kHz
≥10 kHz
0.70
1.00
1.17
1.36
1.50
Please read Cautions and warnings and
Important notes at the end of this document.
2
04/08
SMD capacitors
Standard series – 85 °C
B41112
Dimensional drawings
d × l (mm)
4 × 5.4 ... 8 × 6.2:
Bottom View
_ 0.2
l +0.1
C±0.2
4
_
H
2
E
0.5 max.
B±0.2
ød±0.5
+
0.3 max.
1
A±0.2
A±0.2
(l±0.3)*
3
KAL1134-F
* Applies to 6.3 × 5.8 mm, 6.3 × 7.7 mm and 8 × 6.2 mm
d × l (mm)
8 × 10 ... 10 × 10:
Bottom View
C±0.2
4
_
H
2
E
0.5 max.
B±0.2
ød±0.5
+
0.3 max.
1
A±0.2
A±0.2
l±0.5
3
KAL1132-Y
➀
➁
➂
➃
Case
Terminal base board
Minus pole
Plus pole
Case dimensions
4 × 5.4
d × l (mm)
5 × 5.4 6.3 × 5.4 6.3 × 5.8 6.3 × 7.7 8 × 6.2
8 × 10
10 × 10
A
1.8
2.1
2.4
2.4
2.4
3.3
2.9
3.2
B
4.3
5.3
6.6
6.6
6.6
8.3
8.3
10.3
C
4.3
5.3
6.6
6.6
6.6
8.3
8.3
10.3
E
1.0
1.3
2.2
2.2
2.2
2.3
3.1
4.5
H
Please read Cautions and warnings and
Important notes at the end of this document.
0.5 … 0.8
3
04/08
0.8 … 1.1
SMD capacitors
Standard series – 85 °C
B41112
Y
a
Y
Layout recommendation
X
KAL1109-Z
Please read Cautions and warnings and
Important notes at the end of this document.
4
04/08
d × l (mm)
X
Y
a
4.0 × 5.4
1.6
2.6
1.0
5.0 × 5.4
1.6
3.0
1.4
6.3 × 5.4
1.6
3.5
2.1
6.3 × 5.8
1.6
3.5
2.1
6.3 × 7.7
1.6
3.5
2.1
8.0 × 6.2
2.5
4.0
2.1
8.0 × 10.0
2.5
3.5
3.0
10.0 × 10.0
2.5
4.0
4.0
SMD capacitors
Standard series – 85 °C
B41112
Overview of available types
VR (V DC)
4
6.3
10
16
25
Case dimensions d × l (mm)
CR (µF)
4
× 5.4
4
× 5.4
4
5
× 5.4
× 5.4
4.7
10
22
4
× 5.4
4
5
× 5.4
× 5.4
4
5
× 5.4
× 5.4
5 × 5.4
6.3 × 5.4
33
4
× 5.4
4
5
× 5.4
× 5.4
4
5
× 5.4
× 5.4
5 × 5.4
6.3 × 5.4
5 × 5.4
6.3 × 5.4
47
4
× 5.4
4
5
× 5.4
× 5.4
5 × 5.4
6.3 × 5.4
5 × 5.4
6.3 × 5.4
6.3 × 5.4
6.3 × 5.8
56
5
× 5.4
5 × 5.4
6.3 × 5.4
5 × 5.4
6.3 × 5.4
5 × 5.4
6.3 × 5.4
6.3 × 7.7
100
5
× 5.4
5 × 5.4
6.3 × 5.4
5 × 5.4
6.3 × 5.4
6.3 × 5.8
6.3 × 5.4
6.3 × 5.8
8 × 6.2
6.3 × 7.7
8 × 6.2
8 × 10
150
6.3 × 5.4
6.3 × 5.4
6.3 × 7.7
6.3 × 7.7
8
× 10
220
6.3 × 5.4
6.3 × 5.8
6.3 × 5.4
6.3 × 5.8
8 × 6.2
6.3 × 7.7
8 × 6.2
6.3 × 7.7
8 × 10
8
10
× 10
× 10
330
6.3 × 5.4
6.3 × 7.7
6.3 × 7.7
8 × 6.2
8
× 10
8
10
× 10
× 10
8
10
× 10
× 10
470
6.3 × 7.7
8
× 10
8
10
× 10
× 10
8
10
× 10
× 10
10
× 10
10
× 10
680
8
× 10
8
× 10
10
× 10
1000
8
× 10
8
10
× 10
× 10
10
× 10
1500
10
× 10
10
× 10
Please read Cautions and warnings and
Important notes at the end of this document.
5
04/08
SMD capacitors
Standard series – 85 °C
B41112
Overview of available types
VR (V DC)
35
50
63
100
Case dimensions d × l (mm)
CR (µF)
0.1
4
× 5.4
4
× 5.4
0.22
4
× 5.4
4
× 5.4
0.33
4
× 5.4
4
× 5.4
0.47
4
× 5.4
4
× 5.4
1.0
4
× 5.4
4
× 5.4
2.2
4
× 5.4
4
× 5.4
3.3
4
× 5.4
4
× 5.4
6.3 × 7.7
8 × 6.2
× 5.4
× 5.4
4
× 5.4
6.3 × 7.7
8 × 10
6.3 × 7.7
8 × 10
4
× 5.4
4
5
10
4
5
× 5.4
× 5.4
5 × 5.4
6.3 × 5.4
6.3 × 5.4
6.3 × 5.8
22
5 × 5.4
6.3 × 5.4
6.3 × 5.4
6.3 × 5.8
8 × 6.2
6.3 × 7.7
8 × 10
33
6.3 × 5.4
6.3 × 5.8
8 × 6.2
6.3 × 7.7
8 × 6.2
8 × 10
8
× 10
47
6.3 × 5.4
6.3 × 7.7
8 × 6.2
6.3 × 7.7
8 × 10
10 × 10
8
× 10
4.7
56
6.3 × 7.7
8
× 10
8
× 10
100
6.3 × 7.7
8 × 10
10 × 10
8
10
× 10
× 10
10
× 10
150
8
× 10
10
× 10
220
8
10
× 10
× 10
10
× 10
330
10
× 10
Please read Cautions and warnings and
Important notes at the end of this document.
6
04/08
8
10
× 10
× 10
10
× 10
SMD capacitors
Standard series – 85 °C
B41112
Technical data and ordering codes
VR
V DC
CR
120 Hz
20 °C
µF
Case
dimensions
d×l
mm
tan δmax
120 Hz
20 °C
IAC,R
120 Hz
85 °C
mA
Ordering code
4
33
47
56
100
150
220
220
330
330
470
680
1000
1500
4
4
5
5
6.3
6.3
6.3
6.3
6.3
6.3
8
8
10
× 5.4
× 5.4
× 5.4
× 5.4
× 5.4
× 5.4
× 5.8
× 5.4
× 7.7
× 7.7
× 10
× 10
× 10
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.50
0.35
0.35
0.35
0.35
0.35
28
33
42
56
79
96
99
98
140
200
284
344
347
B41112A1336M000
B41112A1476M000
B41112A1566M000
B41112A1107M000
B41112A1157M000
B41112A1227M000
B41112B1227M000
B41112A1337M000
B41112B1337M000
B41112A1477M000
B41112A1687M000
B41112A1108M000
B41112A1158M000
6.3
22
33
33
47
47
56
56
100
100
150
220
220
220
330
330
470
680
1000
1000
1500
4
4
5
4
5
5
6.3
5
6.3
6.3
6.3
6.3
8
6.3
8
8
8
8
10
10
× 5.4
× 5.4
× 5.4
× 5.4
× 5.4
× 5.4
× 5.4
× 5.4
× 5.4
× 5.4
× 5.4
× 5.8
× 6.2
× 7.7
× 6.2
× 10
× 10
× 10
× 10
× 10
0.26
0.35
0.26
0.35
0.26
0.35
0.26
0.35
0.26
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
28
34
37
40
45
46
52
47
70
71
86
89
103
125
127
265
318
372
400
489
B41112A2226M000
B41112A2336M000
B41112B2336M000
B41112A2476M000
B41112B2476M000
B41112A2566M000
B41112B2566M000
B41112A2107M000
B41112B2107M000
B41112A2157M000
B41112A2227M000
B41112B2227M000
B41112C2227M000
B41112A2337M000
B41112B2337M000
B41112A2477M000
B41112A2687M000
B41112A2108M000
B41112B2108M000
B41112A2158M000
22
22
33
33
47
47
56
56
4
5
4
5
5
6.3
5
6.3
×
×
×
×
×
×
×
×
0.30
0.20
0.30
0.20
0.30
0.26
0.30
0.26
30
33
34
41
47
52
50
57
B41112A3226M000
B41112B3226M000
B41112A3336M000
B41112B3336M000
B41112A3476M000
B41112B3476M000
B41112A3566M000
B41112B3566M000
10
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
Please read Cautions and warnings and
Important notes at the end of this document.
7
04/08
SMD capacitors
Standard series – 85 °C
B41112
Technical data and ordering codes
VR
V DC
CR
120 Hz
20 °C
µF
Case
dimensions
d×l
mm
tan δmax
120 Hz
20 °C
IAC,R
120 Hz
85 °C
mA
Ordering code
10
100
100
100
150
220
220
330
470
470
680
1000
5
6.3
6.3
6.3
6.3
8
8
8
10
10
10
× 5.4
× 5.4
× 5.8
× 7.7
× 7.7
× 6.2
× 10
× 10
× 10
× 10
× 10
0.30
0.26
0.26
0.26
0.26
0.26
0.26
0.26
0.26
0.26
0.26
54
76
78
76
119
121
240
290
327
393
454
B41112A3107M000
B41112B3107M000
B41112C3107M000
B41112A3157M000
B41112A3227M000
B41112B3227M000
B41112A3337M000
B41112A3477M000
B41112B3477M000
B41112A3687M000
B41112A3108M000
16
10
22
22
33
33
47
47
56
56
100
100
100
150
220
220
330
330
470
470
680
4
4
5
5
6.3
5
6.3
5
6.3
6.3
6.3
8
6.3
6.3
8
8
10
8
10
10
× 5.4
× 5.4
× 5.4
× 5.4
× 5.4
× 5.4
× 5.4
× 5.4
× 5.4
× 5.4
× 5.8
× 6.2
× 7.7
× 7.7
× 10
× 10
× 10
× 10
× 10
× 10
0.16
0.26
0.16
0.26
0.16
0.26
0.16
0.26
0.20
0.26
0.26
0.20
0.26
0.26
0.20
0.20
0.20
0.20
0.20
0.20
23
30
37
44
49
52
58
57
63
86
89
125
135
162
215
270
380
307
330
396
B41112A4106M000
B41112A4226M000
B41112B4226M000
B41112A4336M000
B41112B4336M000
B41112A4476M000
B41112B4476M000
B41112A4566M000
B41112B4566M000
B41112A4107M000
B41112B4107M000
B41112C4107M000
B41112A4157M000
B41112B4227M000
B41112A4227M000
B41112A4337M000
B41112B4337M000
B41112A4477M000
B41112B4477M000
B41112A4687M000
×
×
×
×
×
×
×
×
×
×
0.14
0.14
0.12
0.20
0.14
0.20
0.14
0.20
0.20
0.20
16
24
27
38
42
46
52
60
62
65
B41112A5475M000
B41112A5106M000
B41112B5106M000
B41112A5226M000
B41112B5226M000
B41112A5336M000
B41112B5336M000
B41112A5476M000
B41112B5476M000
B41112A5566M000
25
4.7
10
10
22
22
33
33
47
47
56
4
4
5
5
6.3
5
6.3
6.3
6.3
6.3
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.8
7.7
Please read Cautions and warnings and
Important notes at the end of this document.
8
04/08
SMD capacitors
Standard series – 85 °C
B41112
Technical data and ordering codes
VR
V DC
CR
120 Hz
20 °C
µF
Case
dimensions
d×l
mm
tan δmax
120 Hz
20 °C
IAC,R
120 Hz
85 °C
mA
Ordering code
25
100
100
100
150
220
220
330
330
470
6.3
8
8
8
8
10
8
10
10
× 7.7
× 6.2
× 10
× 10
× 10
× 10
× 10
× 10
× 10
0.20
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
143
145
180
192
232
250
284
305
393
B41112B5107M000
B41112C5107M000
B41112A5107M000
B41112A5157M000
B41112A5227M000
B41112B5227M000
B41112A5337M000
B41112B5337M000
B41112A5477M000
35
4.7
10
10
22
22
33
33
33
47
47
47
56
100
100
100
150
220
220
330
4
4
5
5
6.3
6.3
6.3
8
6.3
6.3
8
6.3
6.3
8
10
8
8
10
10
× 5.4
× 5.4
× 5.4
× 5.4
× 5.4
× 5.4
× 5.8
× 6.2
× 5.4
× 7.7
× 6.2
× 7.7
× 7.7
× 10
× 10
× 10
× 10
× 10
× 10
0.12
0.16
0.12
0.16
0.12
0.16
0.16
0.14
0.16
0.16
0.14
0.16
0.16
0.14
0.14
0.14
0.14
0.14
0.14
18
24
29
39
46
53
54
67
69
70
76
80
132
175
210
214
246
265
324
B41112A7475M000
B41112A7106M000
B41112B7106M000
B41112A7226M000
B41112B7226M000
B41112A7336M000
B41112B7336M000
B41112C7336M000
B41112A7476M000
B41112B7476M000
B41112C7476M000
B41112A7566M000
B41112C7107M000
B41112A7107M000
B41112B7107M000
B41112A7157M000
B41112A7227M000
B41112B7227M000
B41112A7337M000
×
×
×
×
×
×
×
×
×
×
×
×
×
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.14
0.12
0.14
0.12
0.14
0.14
50
0.1
0.22
0.33
0.47
1.0
2.2
3.3
4.7
4.7
10
10
22
22
4
4
4
4
4
4
4
4
5
5
6.3
6.3
6.3
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.8
Please read Cautions and warnings and
Important notes at the end of this document.
9
1.0
2.0
2.8
4.0
8.4
13
17
18
20
30
33
43
44
04/08
B41112A6104M000
B41112A6224M000
B41112A6334M000
B41112A6474M000
B41112A6105M000
B41112A6225M000
B41112A6335M000
B41112A6475M000
B41112B6475M000
B41112A6106M000
B41112B6106M000
B41112A6226M000
B41112B6226M000
SMD capacitors
Standard series – 85 °C
B41112
Technical data and ordering codes
VR
V DC
CR
120 Hz
20 °C
µF
Case
dimensions
d×l
mm
tan δmax
120 Hz
20 °C
IAC,R
120 Hz
85 °C
mA
Ordering code
50
22
33
33
33
47
47
47
56
100
100
150
220
8
6.3
8
8
6.3
8
10
8
8
10
10
10
× 6.2
× 7.7
× 6.2
× 10
× 7.7
× 10
× 10
× 10
× 10
× 10
× 10
× 10
0.12
0.14
0.12
0.12
0.14
0.12
0.12
0.12
0.12
0.12
0.12
0.12
56
94
95
110
105
132
146
150
181
195
238
289
B41112C6226M000
B41112B6336M000
B41112C6336M000
B41112A6336M000
B41112C6476M000
B41112A6476M000
B41112B6476M000
B41112A6566M000
B41112A6107M000
B41112B6107M000
B41112A6157M000
B41112A6227M000
63
0.1
0.22
0.33
0.47
1.0
2.2
3.3
4.7
10
10
22
22
33
47
56
100
4
4
4
4
4
4
4
4
6.3
6.3
6.3
8
8
8
8
10
× 5.4
× 5.4
× 5.4
× 5.4
× 5.4
× 5.4
× 5.4
× 5.4
× 5.4
× 5.8
× 7.7
× 10
× 10
× 10
× 10
× 10
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
1.0
2.3
3.5
5.0
10
15
20
23
34
35
70
78
160
170
230
280
B41112A8104M000
B41112A8224M000
B41112A8334M000
B41112A8474M000
B41112A8105M000
B41112A8225M000
B41112A8335M000
B41112A8475M000
B41112A8106M000
B41112B8106M000
B41112B8226M000
B41112A8226M000
B41112A8336M000
B41112A8476M000
B41112A8566M000
B41112A8107M000
100
3.3
3.3
4.7
4.7
10
10
22
22
33
6.3
8
6.3
8
6.3
8
8
10
10
× 7.7
× 6.2
× 7.7
× 10
× 7.7
× 10
× 10
× 10
× 10
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
28
31
35
51
50
85
90
120
190
B41112A9335M000
B41112B9335M000
B41112A9475M000
B41112B9475M000
B41112B9106M000
B41112A9106M000
B41112A9226M000
B41112B9226M000
B41112A9336M000
Please read Cautions and warnings and
Important notes at the end of this document.
10
04/08
Cautions and warnings
General
Also see “Important notes” on page 13.
1
Aluminum electrolytic capacitors have a bi-polar structure. This is marked on the body of the
capacitor. A capacitor must not be mounted with reversed polarity. The application of an AC
or reverse voltage may cause a short circuit or damage the capacitor. Bi-polar capacitors
must not be used in AC applications, where the polarity may be reversed in the circuits or is
unknown.
2
The DC voltage applied to the capacitor terminal must not exceed its rated operating voltage,
as this will result in a rapid increase of the leakage current and may damage the capacitor. It
is recommended to operate the capacitor at 70–80% of its rated voltage to optimize its service life.
3
The ripple current applied to the capacitor must be within the permitted range. An excessive
ripple current leads to impaired electrical properties and may damage the capacitor. Note that
the sum of the peak values of the ripple voltage and the DC operating voltage must not exceed the rated DC voltage.
4
Capacitors must be used within their permitted range of operating temperature. Operation at
room temperature optimizes their service life.
5
Capacitors with case diameter ≥8 mm are equipped with a safety vent. In capacitors fitted
with a lead or soldering lug, the safety vent is usually located at the base of the case. It needs
sufficient space around it to operate optimally. The following dimensions are recommended:
for case diameter d = 8 to 16 mm, more than 2 mm; for d =18 to 35 mm, more than 3 mm;
and for d = 42 mm or more, more than 5 mm.
6
Capacitors should not be mounted with the safety vent face down on the board. Do not locate
any wire or copper trace near the safety vent. Do not reverse the voltage, as this may result
in excess pressure and the leakage of electrolyte.
7
Gas is released through the safety vent when the pressure inside the capacitor is too high. A
gaseous liquid around the safety vent does not indicate a leakage of electrolyte.
8
The capacitor should be stored under conditions of normal temperature and in a non-acid,
non-alkali environment of normal humidity. Exposure to high temperatures, for example under direct sunlight, will reduce its operating life. If the capacitor is stored in an environment
containing acids or alkalis, the solderability of the leads may be affected.
9
The leakage current of an aluminum electrolytic capacitor may increase after a long period
of storage. After such storage, the capacitor must be aged by applying the rated operating
voltage for 6–8 hours before use.
10
Manual soldering:
a Soldering must be performed within the specified conditions.
Bit temperature: 350 °C; application time of soldering iron: 3 seconds.
b Ensure that the soldering iron does not touch any part of the capacitor body.
Please read Cautions and warnings and
Important notes at the end of this document.
11
04/08
Cautions and warnings
11
Do not apply excessive force to the leads and terminals. Do not move the capacitor after soldering it onto the PC board and do not carry the PC board by gripping the capacitor. Observe
the following rules to prevent undue stress to the capacitor:
a Do not tilt or bend the capacitor after soldering.
b Ensure that the terminal spacing matches the corresponding hole spacing on the PC
board.
12
The aluminum case is not insulated from the cathode. Do not place a conductor under the
aluminum capacitors on the PC board as this may cause a short circuit. The case and top of
capacitors used in switched mode power supplies have a high-voltage-resistant heat shrink
sleeve to ensure safe usage.
13
The leads of capacitors with a case diameter exceeding 14 mm cannot be used for fixing.
Please read Cautions and warnings and
Important notes at the end of this document.
12
04/08
Important notes
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As
a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very
high level of operational safety and especially in customer applications in which the malfunction
or failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of
the customer application or other action taken by the customer (e.g. installation of protective
circuitry or redundancy) that no injury or damage is sustained by third parties in the event of
malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently,
we cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in case of individual agreements deviating from the foregoing for
customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK,
MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap,
SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks
registered or pending in Europe and in other countries. Further information will be found on
the Internet at www.epcos.com/trademarks.
13
04/08