SAW Components SAW Rx 2in1 Filter iDEN Series/Type: Ordering code: B4231 B39941B4231H410 Date: Version: Apr 10, 2006 1.1 EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components B4231 SAW Rx 2in1 Filter 860.5 / 938.0 MHz Preliminary Data Application ■ ■ ■ ■ ■ ■ ■ Low-loss 2in1 RF filter for iDEN Device with two integrated Rx filters Low amplitude ripple Usable passband Filter 1: 19.0 MHz Usable passband Filter 2: 6.0 MHz No matching network required for operation at 50 Ω Unbalanced to unbalanced operation for both filters Features Package size 2.5 x 3.0 x 0.98 mm3 Package code QCC8E Approx. weight 0.027 g Ceramic package for Surface Mount Technology (SMT) ■ RoHS compliant ■ Ni, gold-plated terminals ■ ■ ■ ■ Pin configuration ■ ■ ■ ■ ■ ■ 1 7 3 5 2,6 4,8 Input [Filter 1] Output [Filter 1] Input [Filter 2] Output [Filter 2] To be grounded Case ground Please read cautions and warnings and important notes at the end of this document. 2 Apr 10, 2006 1 7 2,4 6,8 3 5 SAW Components B4231 SAW Rx 2in1 Filter 860.5 / 938.0 MHz Preliminary Data Characteristics of Filter 1 T = ZS = ZL = Operating temperature range: Terminating source impedance: Terminating load impedance: -30 ... +70 ˚C 50 Ω 50 Ω — B4231 1) typ. @ 25 ˚C 860.5 — 2.1 3.0 3) dB — 0.6 1.0 dB MHz — 12 50 ns 870.0 MHz 12.0 14.0 — dB 870.0 MHz 12.0 13.5 — dB 688.0 705.0 788.0 825.0 902.0 960.0 1036.0 1740.0 3500.0 3600.0 4000.0 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz 50 49 42 25 25 42 45 33 30 28 20 58 57 51 45 38 51 50 40 35 32 25 — — — — — — — — — — — dB dB dB dB dB dB dB dB dB dB dB min. Center frequency fC Maximum insertion attenuation 851.0 ... 870.0 αmax MHz Amplitude ripple (p-p) 851.0 ... 870.0 MHz Group delay ripple (p-p) 851.0 ... 870.0 851.0 ... Output return loss 851.0 ... max. DGL 2) min./ max. — MHz ∆α ∆τ Input return loss α Attenuation 0.1 688.0 769.0 806.0 896.0 925.0 1013.0 1702.0 1740.0 3500.0 3600.0 1) 2) 3) ... ... ... ... ... ... ... ... ... ... ... Values in columns min, typ and max indicate the development status of the current version. Values in column DesignGoal (DGL) indicate the target performance. 2.5 dB max at 25 ˚C. Please read cautions and warnings and important notes at the end of this document. 3 Apr 10, 2006 SAW Components B4231 SAW Rx 2in1 Filter 860.5 / 938.0 MHz Preliminary Data Maximum ratings of Filter 1 Operable temperature range T –40/+85 ˚C Storage temperature range Tstg –40/+85 ˚C DC voltage VDC 5 V VESD 100 1) PIN 10 ESD voltage Input Power at 851.0 ... 870.0 MHz 1) V dBm machine model, 10 pulses continuous wave, 10000 hours, 85 ˚C acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses. Please read cautions and warnings and important notes at the end of this document. 4 Apr 10, 2006 SAW Components B4231 SAW Rx 2in1 Filter 860.5 / 938.0 MHz Preliminary Data Transfer Function Filter 1 (narrowband) Transfer Function Filter 1 (wideband) Please read cautions and warnings and important notes at the end of this document. 5 Apr 10, 2006 SAW Components B4231 SAW Rx 2in1 Filter 860.5 / 938.0 MHz Preliminary Data Smith Charts Filter 1 S11 Function S22 Function Please read cautions and warnings and important notes at the end of this document. 6 Apr 10, 2006 SAW Components B4231 SAW Rx 2in1 Filter 860.5 / 938.0 MHz Preliminary Data Characteristics of Filter 2 T = ZS = ZL = Operating temperature range: Terminating source impedance: Terminating load impedance: -30 ... +70 ˚C 50 Ω 50 Ω — B4231 1) typ. @ 25 ˚C 938.0 — 1.8 3.0 3) dB — 0.1 1.0 dB MHz — 2 50 ns 941.0 MHz 12.0 21.0 — dB 941.0 MHz 12.0 21.0 — dB 756.0 762.0 824.0 845.0 852.0 894.0 902.0 1031.0 1121.0 1882.0 3600.0 4000.0 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz 50 49 25 35 42 35 25 42 43 33 30 24 54 53 51 50 50 47 47 48 47 39 36 28 — — — — — — — — — — — — dB dB dB dB dB dB dB dB dB dB dB dB min. Center frequency fC Maximum insertion attenuation 935.0 ... 941.0 αmax MHz Amplitude ripple (p-p) 935.0 ... 941.0 MHz Group delay ripple (p-p) 935.0 ... 941.0 935.0 ... Output return loss 935.0 ... max. DGL 2) min./ max. — MHz ∆α ∆τ Input return loss α Attenuation 0.1 756.0 806.0 824.0 845.0 852.0 896.0 1024.0 1113.0 1870.0 1882.0 3600.0 1) 2) 3) ... ... ... ... ... ... ... ... ... ... ... ... 45 25 Values in columns min, typ and max indicate the development status of the current version. Values in column DesignGoal (DGL) indicate the target performance. 2.5 dB max at 25 ˚C. Please read cautions and warnings and important notes at the end of this document. 7 Apr 10, 2006 SAW Components B4231 SAW Rx 2in1 Filter 860.5 / 938.0 MHz Preliminary Data Maximum ratings of Filter 2 Operable temperature range T –40/+85 ˚C Storage temperature range Tstg –40/+85 ˚C DC voltage VDC 5 V VESD 100 1) PIN 10 ESD voltage Input Power at 935.0 ... 941.0 MHz 1) V dBm machine model, 10 pulses continuous wave, 10000 hours, 85 ˚C acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses. Please read cautions and warnings and important notes at the end of this document. 8 Apr 10, 2006 SAW Components B4231 SAW Rx 2in1 Filter 860.5 / 938.0 MHz Preliminary Data Transfer Function Filter 2 (narrowband) Transfer Function Filter 2 (wideband) Please read cautions and warnings and important notes at the end of this document. 9 Apr 10, 2006 SAW Components B4231 SAW Rx 2in1 Filter 860.5 / 938.0 MHz Preliminary Data Smith Charts Filter 2 S11 Function S22 Function Please read cautions and warnings and important notes at the end of this document. 10 Apr 10, 2006 SAW Components B4231 SAW Rx 2in1 Filter 860.5 / 938.0 MHz Preliminary Data References Type B4231 Ordering code B39941B4231H410 Marking and package C61157-A7-A92 Packaging F61074-V8174-Z000 Date codes L_1126 B4231_LB_NB.s2p S-parameters B4231_LB_WB.s2p B4231_UB_NB.s2p B4231_UB_WB.s2p Soldering profile S_6001 RoHS compatible defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG . This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 11 Apr 10, 2006 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as “hazardous”). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 12 Apr 10, 2006