SAW Components Data Sheet B5013 SAW Components B5013 Low-Loss Filter 860,5 MHz Data Sheet Ceramic package DCC6D Features Low-loss filter (RX) for Trunked Radio Usable bandwidth 19 MHz No matching required for operation at 50 Ω Unbalanced to unbalanced or unbalanced to balanced operation ● Package for Surface Mounted Technology (SMT) ● Hermetically sealed ceramic package ● ● ● ● Terminals ● Gold-plated typ. Dimensions in mm, approx. weight 0,037 g Pin configuration 2 6 4 1, 3, 5 Type B5013 Input Output / Output balanced Output ground / Output balanced Input ground / Case ground Ordering code B39861-B5013-U510 Marking and Package Packing according to according to C61157-A7-A68 F61074-V8168-Z000 Electrostatic Sensitive Device (ESD) Maximum ratings Operable temperature range Storage temperature range DC voltage Source power TA Tstg VDC Ps -40 / +85 -40 / +85 5 13,0 2 ˚C ˚C V dBm source impedance 50 Ω Nov 30, 2004 SAW Components B5013 Low-Loss Filter 860,5 MHz Data Sheet Characteristics Operating temperature range: Terminating source impedance: Terminating load impedance: TA = +15 ... +35 ˚C ZS = 50 Ω unbalanced to balanced operation ZL = 50 Ω unbalanced to balanced operation min. typ. max. — 860,5 — — 3,0 3,9 dB — 0,9 1,5 dB VSWR (Input) 851,0 MHz ... 870,0 MHz — 2,2 2,4 VSWR (Output) 851,0 MHz ... 870,0 MHz — 2,6 2,8 Nominal frequency fN Maximum insertion attenuation 851,0 MHz ... 870,0 MHz αmax Amplitude ripple (p-p) 851,0 MHz ... 870,0 MHz ∆α MHz αabs Absolute attenuation 0,1 MHz ... 708,0 MHz 708,0 MHz ... 789,0 MHz 789,0 MHz ... 825,0 MHz 825,0 MHz ... 841,0 MHz 888,0 MHz ... 950,0 MHz 950,0 MHz ... 2450,0 MHz 2450,0 MHz ... 3700,0 MHz 3700,0 MHz ... 4000,0 MHz 42 30 23 13 13 22 20 10 44 40 37 22 18 25 23 18 -1,5 -0,5 — — — — — — — — dB dB dB dB dB dB dB dB Symmetry in band |S31|/|S21| 851,0 ... 870,0 MHz arg(S31/S21) 851,0 ... 870,0 MHz TCf Temperature coefficient of frequency 3 0,5 170 180 190 — – 36 — Nov 30, 2004 dB ˚ ppm/K SAW Components B5013 Low-Loss Filter 860,5 MHz Data Sheet Characteristics Operating temperature range: Terminating source impedance: Terminating load impedance: TA = -30 ... +70 ˚C ZS = 50 Ω unbalanced to balanced operation ZL = 50 Ω unbalanced to balanced operation min. typ. max. — 860,5 — — 3,6 4,5 dB — 1,1 2,5 dB VSWR (Input) 851,0 MHz ... 870,0 MHz — 2,4 2,6 VSWR (Output) 851,0 MHz ... 870,0 MHz — 2,7 2,9 Nominal frequency fN Maximum insertion attenuation 851,0 MHz ... 870,0 MHz αmax Amplitude ripple (p-p) 851,0 MHz ... 870,0 MHz ∆α MHz αabs Absolute attenuation 0,1 MHz ... 708,0 MHz 708,0 MHz ... 789,0 MHz 789,0 MHz ... 825,0 MHz 825,0 MHz ... 841,0 MHz 888,0 MHz ... 950,0 MHz 950,0 MHz ... 2450,0 MHz 2450,0 MHz ... 3700,0 MHz 3700,0 MHz ... 4000,0 MHz 42 30 23 13 13 22 20 10 44 40 37 22 18 25 23 18 -1,5 -0,5 — — — — — — — — dB dB dB dB dB dB dB dB Symmetry in band |S31|/|S21| 851,0 ... 870,0 MHz arg(S31/S21) 851,0 ... 870,0 MHz TCf Temperature coefficient of frequency 4 0,5 170 180 190 — – 36 — Nov 30, 2004 dB ˚ ppm/K SAW Components B5013 Low-Loss Filter 860,5 MHz Data Sheet Transfer function (unbalanced to balanced operation) Transfer function (pass band; unbalanced to balanced operation) 5 Nov 30, 2004 SAW Components B5013 Low-Loss Filter 860,5 MHz Data Sheet Amplitude symmetry |S31|/|S21| Phase symmetry arg(S31/S21) - 180˚ 6 Nov 30, 2004 SAW Components B5013 Low-Loss Filter 860,5 MHz Data Sheet Published by EPCOS AG Surface Acoustic Wave Components Division, SAW MC PD P.O. Box 80 17 09, D-81617 Munich, GERMANY EPCOS AG 2004. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 7 Nov 30, 2004