EPCOS B65517-D63-A33

PM/P/P Cores Halves/EP/TT/PR Cores
Series/Type:
P9x5
The following products presented in this data sheet are being withdrawn.
Ordering Code
Substitute Product
B65522A50000000
B65517D0000R026
B65518C3000X001
B65518C3000X101
B65517D0000R048
B65518C3000X101
B65518C3000X001
Date of
Withdrawal
2004-10-18
2002-08-02
2003-08-08
2004-01-23
Deadline Last
Orders
2005-03-31
2002-12-31
2004-02-29
Last Shipments
2005-09-30
2003-03-31
2004-08-31
For further information please contact your nearest EPCOS sales office, which will also support
you in selecting a suitable substitute. The addresses of our worldwide sales network are
presented at www.epcos.com/sales.
P9×5
Core
B65517
■ In accordance with IEC 60133
■ Pot cores are supplied in sets
Magnetic characteristics (per set)
with center without
hole
center hole
Σl/A
le
Ae
A min
Ve
1,25
12,2
9,8
—
120
mm–1
mm
mm2
mm2
mm3
1,13
13,4
11,9
9,3
159
Approx. weight (per set)
m
0,8
1,0
g
Gapped
Material
AL value
nH
K1
25 ± 3 %
40 ± 3 %
s
approx.
mm
0,45
0,26
µe
25
40
Ordering code 1)
-D with center hole
-T with threaded sleeve
B65517-+25-A1
B65517-+40-A1
M33
63 ± 3 %
0,20
63
B65517-D63-A33
N48
100 ± 3 %
160 ± 3 %
200 ± 3 %
250 ± 5 %
0,10
0,06
0,04
0,03
100
159
200
249
B65517-+100-A48
B65517-+160-A48
B65517-D200-A48
B65517-D250-J48
µe
Ordering code
-D with center hole
-W without center hole
B65517-D-R26
Ungapped
Material
A L value
N26
1300 + 30/– 20 %
1190
N30
2500 + 30/– 20 %
2490
B65517-D-R30
T38
5500 + 40/– 30 %
4945
B65517-W-Y38
nH
1) Replace the + by the code letter ”D“ or ”T“ for the required version.
318 08/01
P9×5
Accessories
B65522
Coil former
Standard:
Material:
to IEC 60133
GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085:
F max. operating temperature 155 °C), color code black
see “Processing Notes”, page 155
Winding:
Insulating washer 1 between core and coil former
■ For tolerance compensation and for insulation
■ Polycarbonate spring washer (UL 94 V-0, insulation class to IEC 60085: E
Coil former
120°C), 0,04 mm thick
Ordering code
Sections
AN
mm2
lN
mm
A R value
µΩ
1
3,6
19,2
183
B65522-B-T1
2
3,2
19,2
206
B65522-B-T2
Insulating washer 1 (reel packing, PU = 1 reel)
B65522-A5000
Coil former
ø7,4 _ 0,15
ø4+0,1
1,5+0,3
ø4,8 _ 0,1
AN
0,35
0,3
3,5 _ 0,1
FPK0339-Q
ø3,7±0,2
ø7,6±0,2
1,9
Insulating washer 1
0,8±0,15
FPK0054-F
319 08/01
P9×5
Accessories
B65524
SMD coil former with gullwing terminals
Material:
GFR liquid crystal polymer (UL 94 V-0, insulation class to IEC 60085:
F max. operating temperature 155 °C), color code black
Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 350 °C, 1 s
Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s
permissible soldering temperature for wire-wrap connection on coil former: 400°C, 1 s
Winding:
see “Processing Notes”, page 155
A R value
µΩ
lN
mm
Terminals
Ordering code
1
3,4
19,2
194
4
B65524-C1004-T1
3,4
19,2
194
8
B65524-C1008-T1
ø4,8 _ 0,15
3
6
4
5
_ 0,2
16,6 +0,1
1,2
10,16
7
2,54
8
2
6+0,2
1
Recommended
Empfehlung für das
Leiterplattenlayout
PCB
layout
0,65±0,05
1,6 _ 0,2
2,54
4 x 2,54 = 10,16
9,35+0,15
3,95+0,15
10,7 _ 0,2
12,2 _ 0,3
0,3±0,2
ø10,35±0,15
0,75±0,1
0,5±0,05
ø7,45 _ 0,2
4,7 _ 0,1
3,5 _ 0,15
AN
mm2
0,35±0,05
Sections
2,5
17,8
FPK0234-D
In the 4-terminal version terminals 2, 3, 6 and 7 are omitted.
320 08/01
P9×5
Accessories
B65518
Mounting assembly for printed circuit boards
■ The set comprises a terminal carrier and a yoke
■ For snap-in connection
Terminal carrier
■ With thread for the adjusting screw (to be combined with core version ”D“)
Material:
GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085:
F max. operating temperature 155 °C), color code black
Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s
Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s
Yoke
Spring yoke, made of tinned nickel silver (0,25 mm), with ground terminal
Complete mounting assembly
(4 solder terminals)
Ordering code: B65518-D2001
Complete mounting assembly
(6 solder terminals)
Ordering code: B65518-D2002
4 solder terminals
6 solder terminals
9,9 max.
3 4
1 2
9,9 max.
1
4
5
6
M1,4
M1,4
Thread for
Gewindeadjusting
führung
fürscrew
Abgleichschraube
Hole arrangement
View in mounting
direction
c
3,5 _ 0,4
2,54
2,54
1,25
ø0,5
1+0,1
3
1
1+0,1
4
6
1)
1)
ø0,5
Hole arrangement
View in mounting
direction
8,3 max.
a
3,5 _ 0,4
b
2
9,9 max.
8,3 max.
a
3
12,3 max.
M1,4
M1,4
Thread for
Gewindeadjusting
führung
fürscrew
Abgleichschraube
Erdungspunkt
Ground
FPK0057-S
1)
a)
b)
c)
Ground
Erdungspunkt
1,3 hole also permissible
Yoke
Terminal carrier with 4 solder terminals
Terminal carrier with 6 solder terminals
FPK0056-W
321 08/01
P9×5
B63399
Accessories
B65518
Adjusting screw
■ Tube core with thread and core brake made of GFR polyterephthalate
Plastic adjusting screwdriver (not shown)
Plastic handle for adjusting screwdriver (not shown)
Core P 9 × 5
Material
K1
Adjusting screw
Min.
adjusting
range
Ordering code
Tube core
∅ × length
mm
Material
Color
code
25
1,81 × 2,0
Si 1
brown
17
B65518-C3000-X101
40
1,81 × 2,0
K1
blue
16
B65518-C3000-X1
A L value
nH
%
M 33
40
1,81 × 2,0
Si 1
brown
16
B65518-C3000-X101
N 48
100
1,81 × 2,0
K1
blue
15
B65518-C3000-X1
Adjusting screwdriver
B63399-B4
Handle
B63399-B5
Adjusting screw
322 08/01
Herausgegeben von EPCOS AG
Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
 EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfältigung, Veröffentlichung, Verbreitung und
Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG
nicht gestattet.
Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften
zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen
für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland.
Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte
darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen.
Published by EPCOS AG
Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited.
The information contained in this brochure describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for
the Supply of Products and Services of the Electrical and Electronics Industry recommended by the
ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
1