SAW Components SAW Rx Filter GSM 850 Series/Type: Ordering code: B9400 B39881-B9400-K610 Date: Version: Dec 21, 2005 2.0 EPCOS AG 2005. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components B9400 881.50 MHz Low-Loss Filter for Mobile Communication Data Sheet Application ■ Low-loss RF filter for mobile telephone 0,25 0,325 Features Package size 1.4 x1.1 x 0.4 mm3 RoHS compliant Approx. weight 0.003 g Package for Surface Mount Technology (SMT) ■ Ni, gold-plated terminals 2 3 bottom view 1 ■ ■ ■ ■ 0,575 GSM850 systems, receive path (RX) Impedance transform from 50 Ω to 150 Ω Unbalanced to balanced operation Very low insertion attenuation Low amplitude ripple Usable passband 25 MHz Suitable for GPRS class 1 to 12 5 0,5 0,5 4 0,4 +/−0,05 ■ ■ ■ ■ ■ ■ side view 1,1 1,4 Pin configuration ■ 1 ■ 3,4 ■ 2,5 Input, unbalanced Output balanced To be grounded Please read cautions and warnings and important notes at the end of this document. 2 Dec 21, 2005 top view SAW Components B9400 881.50 MHz Low-Loss Filter for Mobile Communication Data Sheet Characteristics T = –20 to +75 ˚C ZS = 50Ω ZL = 150 Ω || 82 nH (balanced) Operating temperature range: Terminating source impedance: Terminating load impedance: — B9400 typ. @ 25˚C 881.5 — min. Center frequency fC Maximum insertion attenuation 869.0 ... 894.0 αmax Amplitude ripple (p-p) 869.0 ... MHz max. — MHz 1.4 1.7 dB dB ∆α 894.0 MHz — 0.4 0.8 869.0 ... 894.0 MHz — 1.4 1.9 869.0 ... 894.0 MHz — 1.4 1.9 Output amplitude balance (|S31/S21|) 869.0 ... 894.0 MHz –1.0 -0.6/0.0 1.0 dB Output phase balance (φ(S31)−φ(S21)+180˚) 869.0 ... 894.0 MHz –10 -3/+1.5 10 ˚ 45 45 30 24 28 36 54 52 33 28 32 40 — — — — — — dB dB dB dB dB dB Input VSWR Output VSWR α Attenuation 0.0 434.0 447.0 914.0 1000.0 1738.0 ... 434.0 ... 447.0 ... 849.0 ... 1000.0 ... 1738.0 ...6000.0 Please read cautions and warnings and important notes at the end of this document. MHz MHz MHz MHz MHz MHz 3 Dec 21, 2005 SAW Components B9400 881.50 MHz Low-Loss Filter for Mobile Communication Data Sheet Maximum ratings Operable temperature range T –30/+85 ˚C Storage temperature range Tstg –40/+85 ˚C DC voltage VDC 5 V ESD voltage VESD 100 1) V Input Power at GSM850, GSM900 GSM1800, GSM1900 Tx bands PIN PIN 15 15 dBm dBm 1) machine model, 10 pulses effective power in the on-state, duty cycle 4:8 acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses. Please read cautions and warnings and important notes at the end of this document. 4 Dec 21, 2005 SAW Components B9400 881.50 MHz Low-Loss Filter for Mobile Communication Data Sheet Transfer function Transfer function Please read cautions and warnings and important notes at the end of this document. 5 Dec 21, 2005 SAW Components B9400 881.50 MHz Low-Loss Filter for Mobile Communication Data Sheet Smith chart / VSWR S11 function S22 function Please read cautions and warnings and important notes at the end of this document. 6 Dec 21, 2005 SAW Components B9400 881.50 MHz Low-Loss Filter for Mobile Communication Data Sheet Type B9400 Ordering code B39881-B9400-K610 Marking and Package C61157-A8-A1 Packaging F61074-V8212-Z000 Date Codes L_1126 S-Parameters B9400_NB.s3p B9400_WB.s3p Soldering profile S_6001 For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2005. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 7 Dec 21, 2005 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as “hazardous”). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 8 Dec 21, 2005