CeraDiode SMD type, array, case size 0508, 0612 Series/Type: Ordering code: CDA*C**GTA B727**D****A*** Date: Version: 2007-02-20 3 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the color to "white" (or invisible). This ensures that the table disappears for the customer PDF. To update the data sheet, click on the symbol "Preview" and then "Close". Please do not alter the header or footer when copying the content. Identification/Classification 1:(header 1 + top left header bar) CeraDiode Identification/Classification 2:(header 2 + bottom left header bar) SMD type, array, case size 0508, 0612 Ordering code: (top right header bar) B727**D****A*** Series/Type: (top right header bar) CDA*C**GTA Preliminary data (optional): (if necessary) Department: KB S PE Published by Hr. Pürstinger Rlease signed PE Release signed QS Modification/Remarks New important notes template from Mrs. Kopp have been added Date: 2007-02-20 © EPCOS AG 2007. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. CeraDiode SMD type, array, case size 0508, 0612 B727**D****A*** CDA*C**GTA Reliable ESD protection of multiple lines Description Due to the ongoing miniaturization, today’s electronic devices are more and more sensitive to electrostatic discharges (ESD). Therefore reliable protection components become absolutely necessary to safeguard your valuable electronics against the impact of ESD. CeraDiodes are ceramic semiconductors optimized specifically for high performance in ESD applications. They have a non-linear voltage/current characteristic for effectively suppressing extremely fast voltage transients and offer superior parametric stability over the complete operating range of –40 °C to +85 °C. CeraDiodes are bi-directional devices. A single CeraDiode connected from signal/data line to ground routes both positive and negative ESD transitions safely to the ground plane. This technique eliminates the need to route ESD charge into the power plane, possibly damaging nearby integrated circuits. Features • • • • • • • • • • Bi-directional ESD protection to IEC 61000-4-2 (level 4) Suitable for uni- and bi-directional lines Bi-directional ESD protection of four lines Routes all ESD events, both positive and negative, safely to ground Suitable for DC working voltages up to 22 V No derating of maximum ratings up to 85 °C Surface mount package in case sizes 0508 and 0612 Extremely fast response time < 0.5 ns Lead-free nickel barrier terminations suitable for lead-free soldering RoHS-compatible Applications • • • • • • EDP products (e.g. desktop and notebook computers) Peripherals (e.g. printers, memory cards, etc.) Portable handheld products (e.g. PDA) Mobile communication Consumer products (Flat TVs, set top boxes, MP3 players, digital cameras, etc.) Liquid crystal displays (LCD) / monitors 2007-02-20 Please read Important notes at the end of this document. Page 2 of 10 CeraDiode SMD type, array, case size 0508, 0612 B727**D****A*** CDA*C**GTA Application examples I/O Line 1 I/O Line 2 I/O Line 3 I/O Line 4 ESD sensitive device GND MLV0023-A-E Note: Protection of I/O lines with CeraDiode array. Pin configuration Pin P1 P2 P3 P4 P5 P6 P7 P8 Description GND GND GND GND I/O Line 1 I/O Line 2 I/O Line 3 I/O Line 4 P8 P7 P6 P1 P2 P3 P5 P4 MLV0150-V Due to the symmetrical configuration no marking information is needed. P1 and P8, P2 and P7, P3 and P6, P4 and P5 can be interchanged. Maximum ratings (TA = 85 °C) Rating Maximum DC working voltage Symbol VDC VESD Value CDA4C20GTA: 22 CDA5C20GTA: 22 CDA4C20GTA: 10 CDA5C20GTA: 30 CDA4C20GTA: 600 CDA5C20GTA: 2200 15 Peak pulse current @ 8/20 µs IPP Peak pulse power @ 8/20 µs PPP Air discharge ESD capability (to IEC 61000-4-2 method) Contact discharge ESD capability (to IEC 61000-4-2 method) Operating temperature (without derating) Storage temperature Unit V kV VESD 8 kV Top –40 to +85 °C Tstg –40 to +125 °C A W 2007-02-20 Please read Important notes at the end of this document. Page 3 of 10 CeraDiode SMD type, array, case size 0508, 0612 B727**D****A*** CDA*C**GTA Characteristics (TA = 25 °C) CDA4C20GTA Parameter Breakdown voltage Leakage current Clamping voltage Capacitance Symbol VBR Ileak Vclamp C Conditions IBR = 1 mA Vleak = 5.6 V IPP = 1 A, 8/20 µs V = 1 V, f = 1 MHz Minimum 24 - Typical 33 Maximum 1 60 - Unit V µA V pF Symbol VBR Ileak Vclamp C Conditions IBR = 1 mA Vleak = 5.6 V IPP = 1 A, 8/20 µs V = 1 V, f = 1 MHz Minimum 25 - Typical 56 Maximum 1 50 - Unit V µA V pF CDA5C20GTA Parameter Breakdown voltage Leakage current Clamping voltage Capacitance Note: Any operating voltage lower than Vleak results in lower leakage current. Typical characteristics MLV0013-Q-E 110 % 90 Permissible percentage of max. ratings 80 70 60 50 40 30 20 10 0_ 55 70 80 90 100 110 120 130 ˚C 150 TA 2007-02-20 Please read Important notes at the end of this document. Page 4 of 10 CeraDiode SMD type, array, case size 0508, 0612 B727**D****A*** CDA*C**GTA Dimensional drawing Dimensions in mm 0612 Min. 3.0 1.45 0.25 0.61 - Max. 3.4 1.75 0.9 0.55 0.91 0.35 d w Max. 2.2 1.45 0.9 0.4 0.6 0.35 h 0508 Min. 1.8 1.05 0.2 0.4 - k Symbol l w h d e k e MLV0048-F Recommended solder pad Dimensions in mm E C 0612 Dim. 0.5 0.7 1.2 0.76 B Symbol A B C E 0508 Dim. 0.35 0.9 0.4 0.5 A MLV0037-S 2007-02-20 Please read Important notes at the end of this document. Page 5 of 10 CeraDiode SMD type, array, case size 0508, 0612 B727**D****A*** CDA*C**GTA Recommended infrared reflow soldering temperature profile tp Temperature Tp Ramp-up Critical zone TL to Tp TL tL T Smax T Smin t S Preheat Ramp-down 25 t 25 ˚C to peak Time TPT0892-3-E Profile feature Average ramp-up rate (TSmax to Tp) Preheat - Temperature min (TSmin) - Temperature max (TSmax) - Time (tSmin to tSmax) Time maintained above - Temperature min (TL) - Time (tL) Peak classification temperature (Tp) Time within 5 °C of actual peak temperature (tp) Ramp-down rate Time 25 °C to peak temperature Sn-Pb eutectic assembly 3 °C/ second max. Pb-free assembly 3 °C/ second max. 100 °C 150 °C 60 … 120 seconds 150 °C 200 °C 60 … 180 seconds 183 °C 60 … 150 seconds 220 °C … 240 °C 217 °C 60 … 150 seconds 240 °C … 260 °C 10 … 30 seconds 20 … 40 seconds 6 °C/ second max. 6 minutes max. 6 °C/ second max. 8 minutes max. Note: All temperatures refer to topside of the package, measured on the package body surface. Soldering guidelines The usage of mild, non-activated fluxes for soldering is recommended, as well as proper cleaning of the PCB. The components are suitable for reflow soldering to JEDEC J-STD-020C. 2007-02-20 Please read Important notes at the end of this document. Page 6 of 10 CeraDiode SMD type, array, case size 0508, 0612 B727**D****A*** CDA*C**GTA Storage conditions As far as possible, the components shall be employed within 12 months. They should be left in their original packing to avoid soldering problems due to oxidized contacts. Storage temperature: –25 °C up to 45 °C Relative humidity: < 75 % annual average, < 95 % on max. 30 days in a year. Symbol Dim. A 180 W1 8.4 Tolerance +0/ –3 +1.5/ –0 W2 max. 14.4 A Definition Reel diameter Reel width (inside) Reel width (outside) Direction of unreeling Reel dimensions in mm W1 Package: 8-mm tape Reel material: Plastic 13±0,2 _0 ø60 +2 W2 KKE0058-I-E Selection guide Part number CDA4C20GTA CDA5C20GTA Ordering code B72714D0200A060 B72724D0200A062 Case size 0508 0612 Qty. per reel 4000 3000 Reel size 180 mm 180 mm 2007-02-20 Please read Important notes at the end of this document. Page 7 of 10 CeraDiode SMD type, array, case size 0508, 0612 B727**D****A*** CDA*C**GTA Taping to IEC 60286-3 Tape material: Cardboard for case size 0508 P0 D0 P2 F Dimensions and tolerances in mm: B0 Cover tapes W E T T1 G A0 P1 T1 Direction of unreeling T2 KKE0063-J-E Tape material: Blister for case size 0612 Section A-A A P0 D0 P2 F K0 A0 T2 D1 P1 A G B0 Cover tape W E T Direction of unreeling KKE0053-C-E 2007-02-20 Please read Important notes at the end of this document. Page 8 of 10 CeraDiode SMD type, array, case size 0508, 0612 B727**D****A*** CDA*C**GTA Dimensions and tolerances in mm: Definition Compartment width Compartment length Compartment height Sprocket hole diameter Compartment hole diameter Sprocket hole pitch Distance centre hole to centre compartment Pitch of the component compartments Tape width Distance edge to centre of hole Distance centre hole to centre compartment Distance compartment to edge Thickness tape Overall thickness 1) ≤ ± 0.2 mm over any 10 pitches Symbol A0 B0 K0 D0 D1 P0 P2 0508 Dim. 1.6 2.4 1.5 4.0 2.0 0612 Dim. 1.9 3.5 1.8 1.5 1.0 4.0 2.0 Tolerance ± 0.2 ± 0.2 max. +0.1/ -0 min. ± 0.1 1) ± 0.05 P1 4.0 4.0 ± 0.1 W E F 8.0 1.75 3.5 8.0 1.75 3.5 ± 0.3 ± 0.1 ± 0.05 G T T2 0.75 0.95 1.12 0.75 0.3 2.5 min. max. max. Note CeraDiodes are not suitable for switching applications or for voltage stabilization, where static power dissipation is required. 2007-02-20 Please read Important notes at the end of this document. Page 9 of 10 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as “hazardous”). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, EPCOS-JONES, BAOKE, Alu-X, CeraDiode, CSSP, MLSC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Page 10 of 10