ALUMINUM ELECTROLYTIC CAPACITORS GJ(15) Snap-in Terminal Type, Low-Profile Sized, Wide Temperature Range. series Withstanding 2000 hours application of rated ripple current at 105°C. Smaller than low-profile GJ series. Ideally suited for flat design of switching power supply. Adapted to the RoHS directive (2002/95/EC). GJ Low Profile GJ (15) Specifications Item Performance Characteristics Category Temperature Range – 40 ~ +105°C (160~250V) , – 25 ~ +105°C (315 ~ 400V) Rated Voltage Range 160 ~ 400V Rated Capacitance Range 39 ~ 390µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current I tan δ 0.20 MAX. 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)] 120Hz 20°C Measurement frequency : 120Hz Rated voltage(V) Stability at Low Temperature Z – 25°C/ Z+20°C Z – 40°C/ Z+20°C Impedance ratio ZT/Z20(MAX.) 160 ~ 250 3 12 315 • 400 8 — Endurance After an application of DC voltage (in the range of rated DC voltage even after over-lapping the specified ripple current) for 2000 hours at 105°C, capacitors meet the characteristic requirements listed at right. Capacitance change tan δ Leakage current Within ±20% of initial value 200% or less of initial specified value Initial specified value or less Shelf Life After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the requirements listed at right. Capacitance change tan δ Leakage current Within ±15% of initial value 150% or less of initial specified value Initial specified value or less Marking Printed with white color letter on black sleeve. Type numbering system (Example : 200V 330µF) Drawing 1 2 3 4 5 6 7 8 9 10 11 12 13 14 LGJ 2D 3 3 1 MELC 1 5 Polarity bar Sleeve (P.E.T.) 10 ±0. 0.8 +0.2 -0.1 10 15±2 2-2 f±0.1 4.0±0.5 Pressure relief vent +0.21 0.8 -0. Configuration Capacitance tolerance (±20%) Rated Capacitance (330µF) Rated voltage (200V) Series name Type 4.0±0.5 2.5 f D +1MAX. 1 1.5 +0.2 -0.1 (PC board hole dimensions) (Terminal dimensions) Case length code Case dia. code fD Code 20 Y 22 Z 25 A 30 B 35 C Dimensions Cod Cap.(µF) V(Code) 160V (2C) 180V (2Z) 200V (2D) 250V (2E) 315V (2F) 400V (2G) e 039 047 056 068 082 100 120 150 180 220 270 330 390 390 470 560 680 820 101 121 151 181 221 271 331 391 20 × 15 22 × 15 25 × 15 30 × 15 30 × 15 35 × 15 20 × 15 22 × 15 25 × 15 30 × 15 30 × 15 35 × 15 35 × 15 0.55 0.65 0.80 0.95 1.00 1.20 0.50 0.60 0.75 0.85 1.00 1.10 1.20 20 × 15 22 × 15 25 × 15 25 × 15 30 × 15 30 × 15 35 × 15 0.45 0.55 0.65 0.75 0.90 1.00 1.10 22 × 15 25 × 15 30 × 15 30 × 15 35 × 15 35 × 15 0.50 0.60 0.70 0.75 0.90 1.00 22 × 15 25 × 15 30 × 15 30 × 15 35 × 15 35 × 15 0.35 0.40 0.45 0.50 0.55 0.60 22 × 15 25 × 15 30 × 15 30 × 15 35 × 15 35 × 15 0.30 0.35 0.40 0.45 0.50 0.55 Case size φ D × L (mm) Rated ripple Rated Ripple (Arms) at 105°C 120Hz Frequency coefficient of rated ripple current Frequency (Hz) 160 ~ 250V Coeff. 315 · 400V 50 0.81 0.77 60 0.85 0.82 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k~ 1.45 1.41 50k~ 1.50 1.43 Minimum order quantity : 50pcs. CAT.8100V