ALUMINUM ELECTROLYTIC CAPACITORS HE Miniature Sized, Low Impedance,High Reliability Approved by Reliability Center for Electronic Component, Japan-Certification No. RCJ-03-23C series Low impedance and high reliability withstanding 4000 hours to 10000 hours. Adapted to the RoHS directive (2002/95/EC). HE HD Long Life Specifications ltem Performance Characteristics Category Temperature Range – 40 ~ +105˚C Rated Voltage Range 6.3 ~ 100V Rated Capacitance Range 0.47 ~ 18000µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Rated voltage (V) 6.3 10 16 25 35 50 63 100 120Hz tan δ (MAX.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.08 20˚C 120Hz tan δ For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. 6.3 10 16 25 35 50 63 100 Z–25˚C / Z+20˚C 4 3 2 2 2 2 2 2 Z–40˚C / Z+20˚C 8 6 4 3 3 3 3 3 Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) After an application of D.C. bias voltage plus the rated ripple current for stated in the below at 105˚C the peak voltage shall not exceed the rated D.C. voltage, capacitors shall meet the following requirements. φD < = 6.3 φD = 8 , 10 φD > = 12.5 6.3 ~ 10WV 4000 hours 6000 hours 8000 hours 16 ~ 100WV 5000 hours 7000 hours 10000 hours Case size Rated voltage (V) Endurance Capacitance change Within ± 25% of initial value tan δ 200% or less of initial specified value Leakage current lnitial specified value or less Printed with white color letter on black sleeve. Marking Type numbering system (Example : 10V 1000µF) Radial Lead Type φ 1 2 3 4 5 6 7 8 9 10 11 12 UHE 1 A 1 0 2 M PD φ P ± 0.5 D+0.5MAX. Sleeve (P.E.T.) d Pressurerelief vent (φ6.3up) L+ MAX. (L < 20) 1.5 (L 20) 2.0 15MIN 4MIN (mm) D 5 6.3 8 10 12.5 16 18 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8 In case L > 25 for the φ12.5 dia. unit, lead dia. φd = 0.8mm φ Configuration Pb-free leadwire φD Pb-free PET sleeve 5 DD 6.3 ED 8 á 10 PD 12.5 ~ 18 HD • Please refer to page 21 about the end seal configulation. Frequency coefficient of rated ripple current Frequency 120Hz 300Hz 1kHz 10kHz~ 0.45 0.55 0.70 0.90 1.00 39 ~ 330 0.60 0.70 0.85 0.95 1.00 390 ~ 1000 0.65 0.75 0.90 0.98 1.00 1200 ~ 18000 0.75 0.80 0.95 1.00 1.00 Cap. (µF) 0.47 ~ 33 50Hz Size code Configuration Capacitance tolerance (± 20%) Rated Capacitance (1000µF) Rated voltage (10V) Series name Type Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS HE series Standard ratings V (Code) Item Cap.(µF) Code 100 101 150 151 220 221 330 331 470 471 680 681 6.3 (0J) Case size 10 (1A) Impedance (½) MAX. fD ´ L (mm) 5 6.3 8 ´ ´ ´ 11 11 11.5 20ûC / 100kHz 0.58 0.22 0.13 Rated ripple Case size (mArms) fD ´ L Ð10ûC / 100kHz 105ûC / 100kHz 2.3 0.87 0.52 ´ 12.5 0.080 0.32 865 1000 102 8 ´ 15 0.087 0.35 840 152 8 ´ 20 0.069 0.27 1050 10 ´ 16 0.060 0.24 1210 10 ´ 20 0.046 0.18 1400 1800 182 12.5 ´ 15 0.049 0.16 1450 2200 222 10 ´ 25 0.042 0.17 1650 2700 332 3900 392 4700 5600 6800 8200 10000 12000 472 822 11 0.58 2.3 210 6.3 ´ 11 0.22 0.87 340 8 ´ 11.5 0.13 0.52 640 8 ´ 15 0.087 0.35 840 10 ´ 12.5 0.080 0.32 865 8 ´ 20 0.069 0.27 1050 10 ´ 16 0.060 0.24 1210 10 ´ 20 0.046 0.18 1400 10 ´ 25 0.042 0.17 1650 12.5 ´ 15 0.049 0.16 1450 10 ´ 31.5 0.031 0.12 1910 12.5 ´ 20 0.035 0.12 1900 16 ´ 15 0.042 0.12 1940 18 ´ 15 0.043 0.11 2210 ´ 31.5 0.031 0.12 1910 16 ´ 15 0.042 0.12 1940 12.5 ´ 20 0.035 0.12 1900 12.5 ´ 25 0.027 0.089 2230 12.5 ´ 25 0.027 0.089 2230 12.5 ´ 31.5 0.024 0.078 2650 18 ´ 15 0.043 0.11 2210 16 ´ 20 0.027 0.078 2530 12.5 ´ 31.5 0.024 0.078 2650 12.5 ´ 35.5 0.020 0.065 2880 12.5 ´ 35.5 0.020 0.065 2880 12.5 ´ 40 0.017 0.056 3350 ´ 16 0.021 0.060 2930 20 0.027 0.078 2530 ´ 25 16 18 ´ 20 0.026 0.067 2860 16 ´ 31.5 0.017 0.050 3450 18 ´ 25 0.019 0.049 3140 16 ´ 35.5 0.015 0.044 3610 562 682 ´ 10 272 3300 Ð10ûC / 100kHz 105ûC / 100kHz 5 640 10 1500 (mArms) 20ûC / 100kHz 340 821 122 Rated ripple 210 820 1200 (mm) Impedance (½) MAX. 12.5 ´ 40 0.017 0.056 3350 16 ´ 25 0.021 0.060 2930 18 ´ 20 0.026 0.067 2860 16 ´ 31.5 0.017 0.050 3450 18 ´ 31.5 0.015 0.040 4170 16 ´ 35.5 0.015 0.044 3610 16 ´ 40 0.013 0.038 4080 18 ´ 25 0.019 0.049 3140 18 ´ 35.5 0.014 0.038 4220 16 ´ 40 0.013 0.038 4080 ´ 18 ´ 40 0.012 0.032 4280 18 31.5 0.015 0.040 4170 103 123 15000 153 18 ´ 35.5 0.014 0.038 4220 18000 183 18 ´ 40 0.012 0.032 4280 : In this case, 6 will be put 12th digit type numbering system. : In this case, 3 will be put 12th digit type numbering system. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS HE series Standard ratings V (Code) Item Cap.(µF) Code 47 470 56 560 100 101 120 121 220 221 330 331 470 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 16 (1C) Case size 25 (1E) Impedance (½) MAX. fD ´ L (mm) 5 6.3 8 ´ ´ ´ 11 11 11.5 20ûC / 100kHz 0.58 0.22 0.13 Rated ripple Case size (mArms) fD ´ L Ð10ûC / 100kHz 105ûC / 100kHz 2.3 0.87 0.52 5 ´ 11 0.58 2.3 210 6.3 ´ 11 0.22 0.87 340 8 ´ 11.5 0.13 0.52 640 8 ´ 15 0.087 0.35 840 10 ´ 12.5 0.080 0.32 865 340 640 ´ 15 0.087 0.35 840 8 ´ 20 0.069 0.27 1050 ´ 12.5 0.080 0.32 865 10 ´ 16 0.06 0.24 1210 8 ´ 20 0.069 0.27 1050 10 ´ 20 0.046 0.18 1400 10 ´ 16 0.060 0.24 1210 12.5 ´ 15 0.049 0.16 1450 10 ´ 25 0.042 0.17 1650 10 ´ 20 0.046 0.18 1400 10 ´ 31.5 0.031 0.12 1910 ´ 12.5 0.035 0.12 1900 15 0.049 0.16 1450 ´ 20 12.5 16 ´ 15 0.042 0.12 1940 18 ´ 15 0.043 0.11 2210 12.5 ´ 25 0.027 0.089 2230 12.5 ´ 31.5 0.024 0.078 2650 16 ´ 20 0.027 0.078 2530 102 10 ´ 25 0.042 0.17 1650 10 ´ 31.5 0.031 0.12 1910 12.5 ´ 20 0.035 0.12 1900 16 ´ 15 0.042 0.12 1940 182 12.5 ´ 25 0.027 0.089 2230 12.5 ´ 35.5 0.020 0.065 2880 18 ´ 15 0.043 0.11 2210 18 ´ 20 0.026 0.067 2860 12.5 ´ 31.5 0.024 0.078 2650 12.5 ´ 40 0.017 0.056 3350 16 ´ 20 0.027 0.078 2530 16 ´ 25 0.021 0.060 2930 ´ 16 0.017 0.050 3450 35.5 0.020 0.065 2880 ´ 31.5 12.5 18 ´ 25 0.019 0.049 3140 16 ´ 35.5 0.015 0.044 3610 222 272 392 Ð10ûC / 100kHz 105ûC / 100kHz 210 821 332 (mArms) 20ûC / 100kHz 8 681 152 Rated ripple 10 471 122 (mm) Impedance (½) MAX. 12.5 ´ 40 0.017 0.056 3350 16 ´ 25 0.021 0.060 2930 16 ´ 20 0.026 0.067 2860 18 ´ 31.5 0.015 0.040 4170 16 ´ 31.5 0.017 0.050 3450 16 ´ 40 0.013 0.038 4080 18 ´ 35.5 0.014 0.038 4220 18 ´ 40 0.012 0.032 4280 472 18 ´ 25 0.019 0.049 3140 16 ´ 35.5 0.015 0.044 3610 18 ´ 31.5 0.015 0.040 4170 16 ´ 40 0.013 0.038 4080 562 6800 682 8200 822 18 ´ 35.5 0.014 0.038 4220 10000 103 18 ´ 40 0.012 0.032 4280 : In this case, 6 will be put 12th digit type numbering system. : In this case, 3 will be put 12th digit type numbering system. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS HE series Standard ratings V (Code) Item Cap.(µF) Code 35 (1V) Case size 50 (1H) Impedance (½) MAX. fD ´ L (mm) 20ûC / 100kHz Rated ripple Case size (mArms) fD ´ L Ð10ûC / 100kHz 105ûC / 100kHz (mm) Impedance (½) MAX. Rated ripple (mArms) 20ûC / 100kHz Ð10ûC / 100kHz 105ûC / 100kHz 0.47 R47 5 ´ 11 5.5 22 17 1 010 5 ´ 11 4 16 30 2.2 2R2 5 ´ 11 2.5 10 43 3.3 3R3 5 ´ 11 2.2 8.8 53 4.7 4R7 5 ´ 11 1.9 7.6 88 10 100 5 ´ 11 1.5 6 100 22 220 5 ´ 11 0.70 2.8 180 33 330 47 470 56 560 100 101 120 121 150 151 180 181 5 ´ 11 0.58 2.3 210 6.3 ´ 11 0.22 0.87 340 8 270 221 271 330 331 470 471 680 561 681 0.52 640 0.087 0.35 840 ´ 12.5 0.080 0.32 865 8´20 0.069 0.27 1050 10 ´ 16 0.060 0.24 1210 10 ´ 20 0.046 0.18 1400 10 12.5 560 0.13 ´ 15 8 220 ´ 11.5 ´ 15 0.049 0.16 1450 10 ´ 25 0.042 0.17 1650 10 ´ 31.5 0.031 0.12 1910 12.5 ´ 20 0.035 0.12 1900 16 ´ 15 0.042 0.12 1940 ´ 11 0.30 1.2 295 8 ´ 11.5 0.17 0.68 555 8 ´ 15 0.12 0.48 730 ´ 12.5 0.12 0.48 760 6.3 10 8 ´ 20 0.091 0.36 910 10 ´ 16 0.084 0.34 1050 10 ´ 20 0.060 0.24 1220 12.5 ´ 15 0.061 0.20 1260 10 ´ 25 0.055 0.22 1440 10 ´ 31.5 0.043 0.17 1690 12.5 ´ 20 0.045 0.15 1660 16 ´ 15 0.055 0.17 1690 12.5 ´ 25 0.034 0.11 1950 18 ´ 15 0.054 0.15 1930 ´ 31.5 0.030 0.10 2310 12.5 ´ 35.5 0.025 0.083 2510 16 ´ 20 0.034 0.10 2210 12.5 820 1000 821 102 12.5 ´ 25 0.027 0.089 2230 12.5 ´ 40 0.021 0.069 2920 18 ´ 15 0.043 0.11 2210 16 ´ 25 0.025 0.075 2555 18 ´ 20 0.036 0.097 2490 ´ 31.5 0.024 0.078 2650 16 ´ 31.5 0.022 0.066 3010 ´ 20 0.027 0.078 2530 18 ´ 25 0.026 0.070 2740 ´ 35.5 0.020 0.065 2880 16 ´ 35.5 0.019 0.057 3150 12.5 ´ 40 0.017 0.056 3350 16 ´ 25 0.021 0.060 2930 16 ´ 40 0.016 0.048 3710 18 ´ 20 0.026 0.067 2860 18 ´ 31.5 0.021 0.057 3635 16 ´ 31.5 0.017 0.050 3450 18 ´ 25 0.019 0.049 3140 0.017 0.046 3680 0.014 0.038 3800 12.5 1200 122 1500 152 1800 182 2200 2700 222 272 3300 332 3900 392 16 12.5 16 ´ 35.5 0.015 0.044 3610 18 ´ 31.5 0.015 0.040 4170 16 ´ 40 0.013 0.038 4080 18 ´ 35.5 0.014 0.038 4220 18 ´ 40 0.012 0.032 4280 18 18 ´ 35.5 ´ 40 : In this case, 6 will be put 12th digit type numbering system. : In this case, 3 will be put 12th digit type numbering system. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS HE series Standard ratings V (Code) 63 (1J) Case size Item Cap.(µF) Code 100 (2A) Impedance (½) MAX. fD ´ L (mm) 20ûC / 100kHz Rated ripple Case size (mArms) fD ´ L Ð10ûC / 100kHz 105ûC / 100kHz (mm) Impedance (½) MAX. Rated ripple (mArms) 20ûC / 100kHz Ð10ûC / 100kHz 105ûC / 100kHz 5 ´ 11 2.3 9.3 62 6.3 ´ 11 1.2 5.0 126 8 ´ 11.5 0.63 2.8 260 390 8 ´ 15 0.45 2.1 335 47 470 10 ´ 12.5 0.43 1.8 325 56 560 8 ´ 20 0.33 1.6 408 68 680 6.8 6R8 15 150 27 270 33 330 39 82 101 120 121 150 151 180 181 270 330 390 470 560 680 820 1000 1200 1500 6.3 221 271 331 391 ´ 11 11 2.3 1.2 9.3 5.0 62 126 ´ 11.5 0.63 2.8 260 10 ´ 16 0.31 1.5 400 8 ´ 15 0.45 2.1 335 10 ´ 20 0.21 0.94 518 10 ´ 12.5 0.43 1.8 325 12.5 ´ 15 0.23 1.1 527 10 ´ 25 0.20 0.84 595 8 ´ 20 0.33 1.6 408 10 ´ 31.5 0.15 0.71 740 10 ´ 16 0.31 1.5 400 12.5 ´ 20 0.16 0.64 765 16 ´ 15 0.14 0.66 895 12.5 ´ 25 0.12 0.45 875 10 ´ 20 0.21 0.94 518 12.5 ´ 15 0.23 1.1 527 10 ´ 25 0.20 0.84 ´ 31.5 0.15 0.71 740 12.5 ´ 20 0.16 0.64 765 16 ´ 15 0.14 0.66 895 12.5 ´ 25 0.12 0.45 875 18 ´ 15 12.5 ´ 31.5 16 ´ 12.5 16 12.5 0.12 0.50 18 ´ 15 0.12 0.50 1030 12.5 ´ 31.5 0.10 0.42 1010 16 ´ 20 0.091 0.38 1130 12.5 ´ 35.5 0.083 0.35 1140 16 ´ 25 0.073 0.27 1350 12.5 ´ 40 0.071 0.30 1280 18 ´ 20 0.080 0.30 1300 16 ´ 31.5 0.054 0.20 1650 18 ´ 25 0.057 0.21 1560 595 10 1030 0.10 0.42 1010 16 ´ 35.5 0.045 0.17 1900 20 0.091 0.38 1130 18 ´ 31.5 0.047 0.17 1720 ´ 35.5 0.083 0.35 1140 ´ 16 ´ 40 0.040 0.15 2130 25 0.073 0.27 1350 ´ 40 0.071 0.30 1280 ´ 18 ´ 35.5 0.040 0.15 1890 18 20 0.080 0.30 1300 16 ´ 31.5 0.054 0.20 1650 ´ 18 ´ 40 0.036 0.13 2470 18 25 0.057 0.21 1560 16 ´ 35.5 0.045 0.17 1900 18 ´ 31.5 0.047 0.17 1720 16 ´ 40 0.040 0.15 2130 18 ´ 35.5 0.040 0.15 1890 18 ´ 40 0.036 0.13 2470 471 561 681 821 102 122 152 ´ 8 820 100 220 5 : In this case, 6 will be put 12th digit type numbering system. : In this case, 3 will be put 12th digit type numbering system. CAT.8100V