D6F D6F MEMS Flow Sensor High accuracy mass flow sensing ■ Small size ■ Fast response ■ Applicable to air, non-corrosive gas, LNG Ordering Information Model D6F-01A1-110 Case Gsa PPS Air* Aluminum LNG* (13A) Flow Range Notes 0-1L/min D6F-02A1-110 Integral orifice 0-2L/min D6F-05N2-000 0-5L/min Application Examples • Medical equipment • Analysis apparatus • Combustion control Ratings Absolute Maximum Rating Item Symbol Rating Unit Power Supply VCC 26.4 VDC Output Voltage VOUT 6 VDC Recommendation Condition Item Power Supply Symbol VCC Condition Min. Typ. Max. Unit – 10.8 – 26.4 VDC Operating Temperature TORR – -10 – 60 °C Output Voltage (Max.) VOH VCC = 12 to 24VDC IOH = 5mA 5 – 5.7 VDC Output Voltage (Min.) VOL VCC = 12 to 24VDC IOH =-5mA 0 – 1 VDC D6F D6F Characteristics Model D6F-01A1-110 D6F-02A1-110 D6F-05N2-000 Rateed quality range 0-1L/min 0-5L/min Joint type Bamboo type (Bamboo min. external diameter: 7.4mm, Bamboo max. external diameter: 8.6mm) (passage diameter: 4mm) Rc 1/4 Screw Case material PPS Aluminum Applicable fluid Air* LNG* Withstand pressure 200kPa Repeat accuracy ±3% F.S. max Operating temperature -10 to 60 degrees (with no icing or condensation) Operating humidity Under 85% RH (with no icing or condensation) Storage temperature -40 to 80 degrees (with no icing or condensation) Storage humidity Under 85% RH (with no ice or no dew) Output signal Analog Output 1-5 VDC Current consumption No-load VCC = 12 to 24VDC, VSS = 0V 25 deg. C, Max. 15mA Insulation resistance More than 20M Ohm (500VDC, between lead terminal and case) Dielectric strength 500VAC, 50/60Hz, for 1 minute. (Leakage current typ < 1mA.) Between the lead terminals and the base Orifice Integral * Dry gas, must not contain large particles, eg dust, oil mist. Dimensions (All dimensions in mm) D6F-01A-110 D6F-02A-110 Integral Not applicable D6F D6F Dimensions (All dimensions in mm) D6F-05N2-000 Cat. No. D6F-01-EU In the interest of product improvement, specifications are subject to change without notice. Omron Electronic Components Europe BV Wegalaan 57 2132 JD Hoofddorp The Netherlands Tel: +31 23 568 1200 Fax: +31 23 568 1212