DATA SHEET SS12E~SS16E SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER CURRENT 1.0 Amperes VOLTAGE 20 to 60 Volts SMA/DO-214AC Unit: inch (mm) FEATURES .062(1.60) .047(1.20) .114(2.90) .098(2.50) • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications • Low profile package • Built-in strain relief • Metal to silicon rectifier. majority carrier conduction • Low power loss,high efficiency • High surge capacity • High current capacity ,low V F • For use in low voltage high frequency inverters, free wheeling, and polarity protection applications. • Pb free product are available : 99% Sn above can meet Rohs environment substance directive request ESD Passed devices : Air mode 15KV ,human body mode 8KV .096(2.44) MECHANICAL DATA .078(2.00) .012(.305) .006(.152) . Case: JEDEC DO-214AC molded plastic Terminals:Solder plated, solderable per MIL-STD-202G, Method 208 Polarity: Color band denotes positive end (cathode) Standard packaging: 12mm tape (EIA-481) Weight: 0.002 ounce, 0.064 gram .181(4.60) .157(4.00) .060(1.52) .030(0.76) .008(.203) .002(.051) .208(5.28) .188(4.80) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Resistive or inductive load. PARAMETER SYMBOL SS12E SS13E SS14E SS15E SS16E UNITS Maximum Recurrent Peak Reverse Voltage V RRM 20 30 40 50 60 V Maximum RMS Voltage V RMS 14 21 28 35 42 V Maximum DC Blocking Voltage V DC 20 30 40 50 60 V Maximum Average Forward Rectified Current .375" (9.5mm) lead length at TL O =75 C I AV 1 A Peak Forward Surge Current :8.3ms single half sine-wave superimposed on rated load(JEDEC method) I FSM 30 A Maximum Forward Voltage at 1.0A VF 0.5 O Maximum DC Reverse Current TA=25 C O at Rated DC Blocking Voltage TA=100 C Maximunl Thermal Resisance Operating Junction and Storage Temperature Range 0.7 IR 0.5 50 R ΘJL R ΘJA 28 88 T J, T STG -50 to +125 V mA O C/W O C NOTES: A.Pulse Test with PW =300µsec, 1% Duty Cycle. B.Mounted on P.C. Board with 5.0mm 2 (.013mm thick) copper pad areas. STAD-FEB.15.2005 PAGE . 1 1.0 SINGLEPHASEHALFWAVE60Hz RESISTIVEORINDUCTIVELOAD P.C.B MOUNTED ON 0.2 X 0.2"( 5.0 X 5. 0mm) COPPERPADAREAS .75 .50 .25 0 0 25 50 75 100 125 150 175 PEAK FORWARDSURGE CURRENT, AMPERES AVERAGEFORWARD RECITIFIED CURRENT AMPERES RATING AND CHARACTERISTIC CURVES 30 25 20 15 10 5 0 1 10 O LEAD TEMPERAURE, C NO. OF CYCLE AT 60HZ Fig.2-MAXIMUMNON-REPETITIVEPEAK FORWARD SURGE CURRENT Fig.1- FORWARD CURRENT DERATING CURVE 10 5 10 4 10 3 10 2 10 1 10 0 100 10 FORWARD CURRENT, AMPERES REVERSE CURRENT, uA 50-60V O T J =125 C O T J =75 C 10 20-40V 1.0 80-100V 0.1 O T A = 25 C -1 V RRM =20-60V V RRM =80-100V O T J =25 C 10 -2 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,% Fig.3- TYPICAL REVERSE CHARACTERISTIC STAD-FEB.15.2005 0.01 0 0.2 0.4 0.6 0.8 1.0 FORWARD VOLTAGE, VOLTS Fig.4- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTIC PAGE . 2