SENSITRON SHD125012N

SHD125012
SHD125012P
SHD125012N
SHD125012D
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 4706, REV. -
HERMETIC POWER SCHOTTKY RECTIFIER
150°C Maximum Operation Temperature
DESCRIPTION: A 45-VOLT, 3/6 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC TO -254
PACKAGE.
ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED.
MAXIMUM RATINGS
RATING
SYMBOL
MAX.
UNITS
PIV
45
Volts
O
IO
3
Amps
O
IO
6
Amps
IFSM
55
Amps
CT
160
pF
RθJC
3.17
°C/W
MAXIMUM OPERATING TEMPERATURE RANGE
Top/Tstg
-65 to
+ 150
°C
MAXIMUM STORAGE TEMPERATURE RANGE
Top/Tstg
-65 to
+ 150
°C
SYMBOL
MAX.
UNITS
Vf
0.66
Volts
PEAK INVERSE VOLTAGE
MAXIMUM DC OUTPUT CURRENT (@ TC =100 C) (Single, Doubler)
MAXIMUM DC OUTPUT CURRENT (@ TC =100 C)
(Common Cathode, Common Anode)
MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t=8.3ms, Sine)
MAXIMUM JUNCTION CAPACITANCE
(V r =5V)
MAXIMUM THERMAL RESISTANCE
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 3 Amps)
TJ = 25 °C
TJ = 125 °C
0.61
MAXIMUM REVERSE CURRENT (Ir @ 45 V PIV)
TJ = 25 °C
TJ = 125 °C
Ir
0.3
14
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web Site - http://www.sensitron.com • E-mail Address - [email protected] •
mA
SHD125012
SHD125012P
SHD125012N
SHD125012D
SENSITRON
TECHNICAL DATA
DATASHEET 4706, REV. -
TO-254
Mechanical Dimensions: In inches / mm
.149 (3.78
Dia.
.139 3.53)
.665 16.89)
1
1.195 30.35)
1
.800 (20.32
.790 20.07) .545 (13.84
.535 13.58)
.685 (17.40
1.235 (31.37
SINGLE
.260 (6.60
.249 6.32)
.050 (1.27
.040 1.02)
.545 (13.84
.535 13.60)
2
.045 (1.14
3
1
COMMON ANODE
3
1
.150(3.81) BSC
.150(3.81) BSC
2 Places
.035 0.89)
3 Places
2
COMMON CATHODE
PINOUT TABLE
TYPE
SINGLE RECTIFIER
DUAL RECTIFIER, COMMON CATHODE (P)
DUAL RECTIFIER, COMMON ANODE (N)
DUAL RECTIFIER, DOUBLER (D)
Curves shown are for bare die only.
2
PIN 1
CATHODE
ANODE 1
CATHODE 1
ANODE
Typical Forward Characteristics
3
2
3
DOUBLER
1
2
PIN 2
ANODE
COMMON CATHODE
COMMON ANODE
CATHODE/ ANODE
3
PIN 3
ANODE
ANODE 2
CATHODE 2
CATHODE
Typical Reverse Characteristics
1
Instantaneous Reverse Current - I
R
(mA)
10
150 °C
125 °C
10-1
100 °C
75 °C
10-2
50 °C
-3
10
125 °C
25 °C
10-4
0
25 °C
10
T (pF)
10-1
Junction Capacitance - C
Instantaneous Forward Current - I
F (A)
100
150 °C
100
10-2
0.0
0.2
0.4
0.6
Forward Voltage Drop - FV(V)
0.8
20
30
40
Reverse Voltage -RV(V)
50
Typical Junction Capacitance
50
45
40
35
30
25
20
15
10
0
10
20
30
40
Reverse Voltage -RV(V)
50
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web Site - http://www.sensitron.com • E-mail Address - [email protected] •
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected]