STV0984 2 Megapixel SMIA profile 2 mobile imaging processor Data Brief Features ■ SMIA Supports 2 SMIA profile 2(a) compliant sensors camera mutually exclusive up to 2 Megapixel (1600x1200) resolution ■ ■ module 1 EXTCLK XSHUTDOWN Enhanced video processor – Noise/defect filtering, color reconstruction, sharpness enhancement and radial corrections – Statistic processor for exposure and white balance and autofocus control – GPIOs and ADC to control external actuators SMIA SMIA output formats: JPEG, YUV4:2:2, YUV420, RGB888, RGB565, RGB444 ■ 4:2:0 JPEG compression with programmable quantization matrix and target file size ■ JPEG operations up to 30 fps ■ Interleaved video modes (concurrent still/video + ViewFinder) – ‘Alternate CCP frame’ mode up to 15 fps – ‘Single CCP frame’ mode up to 30 fps ■ CCP transmitter derating capabilities (by 2,3,4,5 and 6) of sensor high speed clock ■ Interfaces – Sensor interface: 2x CCP2.0(b) serial receivers (csi class 2 receivers) module 2 ITU / PI CCP1.0 CCP 2.0 CCI – Host interface: CCP1.0(a) serial transmitter (csi class 0 transmitter), ITU, PI – Control interface: I²C ■ Flash gun control (high power LED mode and white LED mode) Applications ■ Mobile phone ■ PDA ■ Wireless security camera Description The STV0984 is a new generation, ultra low power Megapixel digital image processor designed to fit into mobile applications. STV0984 comes with support for 2 SMIA sensor heads and programmable intelligent General Purpose IOs engine to control, through dedicated firmware, external actuators such as flashgun, white led and autofocus solution. STV0984 provides internal buffering capability along with a versatile clock manager to accommodate different data rates between input sensors and host interface. a. SMIA 1.0 functional specification version 1.0. SMIA horizontal/vertical scaling not supported. http://www.smia-forum.org/ December 2007 SSCL Baseband or Application Processor SSDA camera 2 video pipes for full frame rate concurrent viewfinder and video/still capture. Single shot (e.g. flashgun) thumbnail generation – Gamma correction programmable for both CRT and LCD displays. Color correction matrix – Digital zoom: smooth downscale capability (independent X/Y characteristics) and upscale capability to 4x ■ EXTCLK XSHUTDOWN STV0984 2.0 Megapixel CCP 2.0 SMIA Processor CCI b. SMIA 1.0 CCP2 Specification version 1.0 Rev 1 For further information contact your local STMicroelectronics sales office. 1/5 www.st.com 5 Application diagram 1 STV0984 Application diagram Figure 1. Application diagram TMS[1:0] TCK TDO TDI STV0984 PDN POR RST_DIR SYS_CLK Clock & Power Mgmt JTAG & Test Interface RAM, ROM, µprocessor I2C slave SSCL SSDA ADC_IN ADC ITU CCP 1.0 GPIO Video Processor SDA I2 C Master PI RAM 128KB VC DATAP DATAN SCL CCP Receiver (x2) GPIO CLKP CLKN Sensor Interface Internal bus see Table 1 VCLK HCLKP HCLKN HDATAP HDATAN LDO PIEZO GPIO VDD_1V8, 1V2_OUT LDO_STBY LDO_EN Table 1. 2/5 Interface signals ITU signal PI GPIO[13] WR_N GPIO[14] RS_N GPIO[15] DREQ ITU[7:0] PI[7:0] HSTYNC RD_N VSYNC CS_N STV0984 2 Technical specifications Technical specifications Table 2. Technical specifications Parameter Description Technology 0.13 µm HCMOS 9 Sensor SMIA compliant CMOS sensors up to 2 Megapixels Frame rate Up to 25 fps @ 2MP JPEG + QQVGA RGB888 @ VGA YUV422 @ QCIF YUV422+QVGA RGB888 Still digital zoom x4 2MP (x4 upscale) Video/Viewfinder digital zoom if single video mode: x10 VGA; x20 QVGA; (x4 upscale) If interleaved video mode: x8 QVGA RGB565+QCIF YUV422 Power supply 2.8V, 1.8V (I/O ring), 1.2V core logic, +/- 0.1V (Optional 1.2V internal regulator from 1.8V) Power requirements 2MP JPEG + QQVGA @ 15fps: 120 mA @1.2V ; 15 mA @ 1.8V (+5 mA if internal regulator ON) Standby < 50µW Package Rohs compliant (Leadfree) TFBGA 84 balls 6 x 6 x 1.2 mm3 Table 3. Temperature ranges Temperature Range (°C) Storage -40 to +150 Operating -25 to +70 3/5 Ordering information 3 STV0984 Ordering information Table 4. Order codes Order code Description STV0984/TR 4 Revision history Table 5. 4/5 Rohs compliant (Leadfree) TFBGA 84 balls, tape and reel packing Document revision history Date Revision 04-Dec-2007 1 Changes Initial release. STV0984 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 5/5