STMICROELECTRONICS STW52100KT/HF

34.807IRELESS
IMPORTANT NOTICE
Dear customer,
As from August 2nd 2008, the wireless operations of STMicroelectronics have moved to a
new company, ST-NXP Wireless.
As a result, the following changes are applicable to the attached document.
●
Company name - STMicroelectronics NV is replaced with ST-NXP Wireless.
●
Copyright - the copyright notice at the bottom of the last page “© STMicroelectronics
200x - All rights reserved”, shall now read: “© ST-NXP Wireless 200x - All rights
reserved”.
●
Web site - http://www.st.com is replaced with http://www.stnwireless.com
●
Contact information - the list of sales offices is found at http://www.stnwireless.com
under Contacts.
If you have any questions related to the document, please contact our nearest sales office.
Thank you for your cooperation and understanding.
ST-NXP Wireless
34.807IRELESS
www.stnwireless.com
STw5210
24-bit, 103 dB SNR audio DAC with playback time extender
Data Brief
Features
■
DAC
– 24-bit audio DAC
– 103 dB dynamic range for the full audio
path
– THD -66 dB (0.0 5%) on 32 Ω
– Sampling rate: 8 kHz to 48 kHz
– Operating mode selection: PTE™ playback
time extender or standard (continuous)
mode
– SNR and consumption adjustable by
register (4 steps)
■
Supply
– Direct connection to the battery
(2.7 V to 4.8 V) thanks to integrated power
management
– I/O supply: 1.62 V to 3.6 V
■
Power consumption
– Stand-by: 1 µW
– Playback: 44 mW for 103 dB SNR,
29 mW for 94 dB SNR
■
VQFPN-44
7x7x1mm
0.5mm pitch
Inputs
– I2S digital input up to 50 MHz
(in PTE™ mode)
– Stereo single ended or differential analog
input
■
Clock
– 32 kHz only needed in PTE™ mode
– System clock input (13 MHz, 19.2 MHz,
26 MHz and 38.4 MHz) for standard
(continuous) mode
– Internal PLL
January 2008
WLCSP-36
2.6x2.6x0.6mm
0.4mm pitch
■
Analog output drivers
– Stereo headset amplifier
- ‘True ground’ output amplifier
(no coupling capacitor).
- 2x50 mW on 32 Ω and 2x80 mW on 16 Ω
- 66 dB programmable gain
- Plug detection, click/pop suppression,
independent right and left channel
shutdown control
– Stereo differential line out
■
RoHS (lead-free) packages
Description
The STw5210 is a 24-bit high performance DAC
for mobile handset application with 103 dB
dynamic range for the whole audio path.
PTE™ function
– Integrated programmable PTE™ memory to
store up to 100 ms of music
(5120 x 24-bit stereo words).
– Empty PTE™ memory detection pin
– Auto-reset interrupt
■
TFBGA-40
4x4x1.2mm
0.5mm pitch
It embeds an innovative PTE™ function that
reduces drastically the whole application power
consumption. In this mode, the music is played
back autonomously, while the whole system is
switched to power saving condition. The IC is then
driven by the 32 kHz clock only. The device can
be used also in a conventional way (continuous
mode) and be driven by the system clock.
STw5210 is very easy to integrate and thanks to
its embedded power management, it can be
directly connected to the battery.
The device foot print is very small as the EBOM is
reduced to a few components. The 50 mW
headset amplifier is of “True-ground” type (no
coupling capacitor) and no additional quartz is
required in PTE™ mode, when the PLL is driven
by the 32 kHz frequency.
Rev 1
For further information contact your local STMicroelectronics sales office.
1/3
www.st.com
3
Block diagram
1
STw5210
Block diagram
Figure 1.
2
STw5210 block diagram
Ordering information
Table 1.
Order codes
Part number
Package
(1)
Packing
4 mm x 4 mm x 1.2mm, pitch 0.5 mm
TFBGA40
STW52100KT/HF
TFBGA40(1) 4 mm x 4 mm x 1.2mm, pitch 0.5 mm
Tape and reel
STW521062/HF
VQFPN44(1)
7 mm x 7 mm x 1 mm, pitch 0.5 mm
Tray
STW521062T/HF
VQFPN44(1)
7 mm x 7 mm x 1 mm, pitch 0.5 mm
Tape and reel
STW521025T/LF
WLCSP36(1)
2.6 mm x 2.6 mm x 0.6 mm, pitch 0.4 mm Tape and reel
1. ECOPACK® package
3
Revision history
Table 2.
2/3
Tray
STW52100K/HK
Document revision history
Date
Revision
24-Jan-2008
1
Changes
Initial release.
STw5210
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2008 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
3/3