ULQ2001 ULQ2003 - ULQ2004 Seven Darlington array Features ■ Seven Darlington per package ■ Extended temperature range: -40 to 105 °C ■ Output current 500 mA per driver (600 mA peak) ■ Output voltage 50 V ■ Automotive Grade product in SO16 package ■ Integrated suppression diodes for inductive loads ■ Outputs can be paralleled for higher current ■ TTL/CMOS/PMOS/DTL compatible inputs ■ Inputs pinned opposite outputs to simplify layout Description The ULQ2001, ULQ2003 and ULQ2004 are high voltage, high current Darlington arrays each containing seven open collector Darlington pairs with common emitters. Each channel rated at 500 mA and can withstand peak currents of 600 mA. Suppression diodes are included for inductive load driving and the inputs are pinned opposite the outputs to simplify board layout. The versions interface to all common logic families. Table 1. DIP-16 SO16 (Narrow) These versatile devices are useful for driving a wide range of loads including solenoids, relays DC motors, LED displays filament lamps, thermal print-heads and high power buffers. The ULQ2001A/2003A and 2004A are supplied in 16 pin plastic DIP packages with a copper leadframe to reduce thermal resistance. They are available also in small outline package (SO16) as ULQ2003D1/2004D1. The ULQ2003 is available as Automotive Grade in SO16 package. The commercial part numbers is shown in the Table 1 (order codes). This device is qualified according to the specification AEC-Q100 of the Automotive market, in the temperature range -40 °C to 125 °C, and the statistical tests PAT, SYL, SBL are performed. Device summary Part numbers Order codes Description Packages ULQ2001 ULQ2001A General purpose, DTL, TTL, PMOS, CMOS DIP-16 ULQ2003 ULQ2003A 5 V TTL, CMOS DIP-16 ULQ2004 ULQ2004A 6–15 V CMOS, PMOS DIP-16 ULQ2003 ULQ2003D1013TR ULQ2003 ULQ2003D1013TRY ULQ2004 SO16 in tape and reel (1) SO16 in tape and reel ULQ2004D1013TR SO16 in tape and reel 1. Automotive Grade products. August 2008 Rev 5 1/14 www.st.com 14 Contents ULQ2001 - ULQ2003 - ULQ2004 Contents 1 Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 6 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 7 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2/14 ULQ2001 - ULQ2003 - ULQ2004 1 Diagram Figure 1. Schematic diagram Diagram ULQ2001 (each driver) ULQ2003 (each driver) ULQ2004 (each driver) 3/14 Pin configuration 2 Pin configuration Figure 2. Pin connections (top view) 4/14 ULQ2001 - ULQ2003 - ULQ2004 ULQ2001 - ULQ2003 - ULQ2004 Maximum ratings 3 Maximum ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VO Output voltage 50 V VIN Input voltage (for ULQ2003A/D1 - 2004A/D1) 30 V IC Continuous collector current 500 mA IB Continuous base current 25 mA TA Operating ambient temperature range -40 to 105 °C Storage temperature range -55 to 150 °C 150 °C TSTG TJ Table 3. Symbol RthJA Junction temperature Thermal data Parameter Thermal resistance junction-ambient, max. DIP-16 SO16 Unit 70 120 °C/W 5/14 Electrical characteristics ULQ2001 - ULQ2003 - ULQ2004 4 Electrical characteristics Table 4. Electrical characteristics (TJ = -40 to 105 °C for DIP16 unless otherwise specified) (TJ = 25 to 105 °C for SO16 unless otherwise specified). Symbol ICEX Parameter Output leakage current Collector-emitter saturation VCE(SAT) voltage (Figure 5) II(ON) II(OFF) VI(ON) Input current (Figure 6) Test conditions TJ = 105°C, VCE= 50V (Figure 3) 100 TJ = 105°C for ULQ2004, VCE= 50V, VI = 1V (Figure 4) 500 IC = 100mA, IB = 250µA 0.9 1.1 IC = 200mA, IB= 350µA 1.1 1.3 IC = 350mA, IB= 500µA 1.3 1.6 for ULQ2003, VI = 3.85V 0.93 1.35 for ULQ2004, VI = 5V 0.35 0.5 for ULQ2004, VI = 12V 1 1.45 Input voltage (Figure 8) for ULQ2003 VCE= 2V, IC = 200mA VCE= 2V, IC = 250mA VCE= 2V, IC = 300mA for ULQ2004 VCE= 2V, IC = 125mA VCE= 2V, IC = 200mA VCE= 2V, IC = 275mA VCE= 2V, IC = 350mA CI Input capacitance Max. 50 TJ = 105°C, IC = 500µA DC forward current gain (Figure 5) Typ. VCE = 50V, (Figure 3) Input current (Figure 7) hFE Min. for ULQ2001, VCE = 2V, IC = 350mA 50 65 mA V 5 6 7 8 1000 25 (1) pF (1) µs µs Turn-on delay time 0.5 VI to 0.5VO 0.25 1 tPHL Turn-off delay time 0.5 VI to 0.5VO 0.25 1 (1) Clamp diode leakage current (Figure 9) VR = 50V 50 IR TJ = 105°C, VR = 50V 100 VF Clamp diode forward voltage (Figure 10) 6/14 V µA tPLH 1. Guaranteed by design. µA 2.4 2.7 3 15 IF = 350mA Unit µA 1.7 2 V ULQ2001 - ULQ2003 - ULQ2004 Table 5. Symbol ICEX Electrical characteristics Electrical characteristics for ULQ2003D1013TRY (Automotive Grade) (TJ = -40 to 125 °C for SO16 unless otherwise specified). Parameter Output leakage current (Figure 3) Collector-emitter saturation VCE(SAT) voltage (Figure 5) Test conditions Min. Typ. VCE = 50V Max. Unit 50 µA IC = 100mA, IB = 250µA 0.9 1.1 IC = 200mA, IB= 350µA 1.1 1.3 IC = 350mA, IB= 500µA 1.3 1.6 0.93 1.35 II(ON) Input current (Figure 6) VI = 3.85V II(OFF) Input current (Figure 7) IC = 500µA VI(ON) Input voltage (Figure 8) VCE = 2V, IC = 200mA VCE = 2V, IC = 250mA VCE = 2V,IC = 300mA 50 65 V mA µA 2.4 2.7 3 V 15 25 pF CI Input capacitance tPLH Turn-on delay time 0.5 VI to 0.5VO 0.25 1 µs tPHL Turn-off delay time 0.5 VI to 0.5VO 0.25 1 µs IR Clamp diode leakage current (Figure 9) VR = 50V 50 µA VF Clamp diode forward voltage (Figure 10) IF = 350mA 2 V 1.7 7/14 Test circuits ULQ2001 - ULQ2003 - ULQ2004 5 Test circuits Figure 3. Output leakage current Figure 5. Collector-emitter saturation voltage Figure 6. Input current (ON) Figure 7. Input current (OFF) Input voltage 8/14 Figure 4. Figure 8. Output leakage current (for ULN2002 only) ULQ2001 - ULQ2003 - ULQ2004 Figure 9. Clamp diode leakage current Test circuits Figure 10. Clamp diode forward voltage 9/14 Package mechanical data 6 ULQ2001 - ULQ2003 - ULQ2004 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a lead-free second level interconnect. The category of second Level Interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. 10/14 ULQ2001 - ULQ2003 - ULQ2004 Package mechanical data Plastic DIP-16 (0.25) mechanical data mm. inch. Dim. Min. a1 0.51 B 0.77 Typ. Max. Min. Typ. Max. 0.020 1.65 0.030 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 17.78 0.700 F 7.1 0.280 I 5.1 0.201 L Z 3.3 0.130 1.27 0.050 P001C 11/14 Package mechanical data ULQ2001 - ULQ2003 - ULQ2004 mm inch DIM. MIN. TYP. A a1 MAX. MIN. TYP. 1.75 0.1 0.25 a2 MAX. 0.069 0.004 0.009 1.6 0.063 b 0.35 0.46 0.014 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 c1 0.020 45° (typ.) D(1) 9.8 10 0.386 0.394 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 8.89 0.350 F(1) 3.8 4.0 0.150 0.157 G 4.60 5.30 0.181 0.208 L 0.4 1.27 0.150 0.050 M S OUTLINE AND MECHANICAL DATA 0.62 0.024 8 ° (max.) SO16 (Narrow) (1) "D" and "F" do not include mold flash or protrusions - Mold flash or protrusions shall not exceed 0.15mm (.006inc.) 0016020 D 12/14 ULQ2001 - ULQ2003 - ULQ2004 7 Revision history Table 6. Document revision history Revision history Date Revision Changes 05-Dec-2006 2 Order codes updated. 23-May-2007 3 Order codes updated. 17-Apr-2008 4 Added new order codes for Automotive grade products see Table 1 on page 1. 25-Aug-2008 5 Modified: Table 4 on page 6 and Table 5 on page 7. 13/14 ULQ2001 - ULQ2003 - ULQ2004 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 14/14