PAGE Wire Wound Chip Inductors 1/3 ——O-Series 0402(1005)/5514 Features 1. Coil body of ceramic material. 2. Contact area of pure tin with a nickel barrier layer. 3. Windings are created by laser-cutting of the copper layer and are –for protection – completely lacquer-coated. 4. Lead Free (RoHS Compliance) Applications Typical applications are resonant circuits or impedance matching for video cameras, mobile telephones and antenna amplifiers etc Ordering Information 5514 270 * 4 (1) (2) (3) (4) 51 (1) Series - 5514 : Size 0402 (1005),Laser-trimmed. (4) Delivery Form 4 : coated, taped on 8 mm cardboard tape packing unit reels Φ180mm, 10.000 pcs. (2) Inductance Value example: 27x10X =27x10 0=27(nH) (3) Inductance Tolerance 8 : ±0.2 nH 3 : ±5% 9 : ±0.3 nH 4 : ±2% Shape and Dimensions (mm) Pad Layout Recommendation a 0,55 ± 0,05 *All specifications are subject to change without notice. b 1,6 ±0,1 c 0,55 ± 0,05 PAGE Wire Wound Chip Inductors 2/3 ——O-Series 0402(1005)/5514 Electrical Parameters Order No. L [nH] Qmin 5514 010 *4 51 5514 012 *4 51 5514 015 *4 51 5514 018 *4 51 5514 022 *4 51 5514 027 *4 51 5514 033 *4 51 5514 039 *4 51 5514 047 *4 51 5514 056 *4 51 5514 068 *4 51 5514 082 *4 51 5514 100 *4 51 5514 120 *4 51 5514 150 *4 51 5514 180 *4 51 5514 220 *4 51 5514 270 *4 51 5514 330 *4 51 5514 390 *4 51 5514 470 *4 51 5514 560 *4 51 5514 680 *4 51 5514 820 *4 51 5514 101 *4 51 1,0 1,2 1,5 1,8 2,2 2,7 3,3 3,9 4,7 5,6 6,8 8,2 10 12 15 18 22 27 33 39 47 56 68 82 100 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 Qtyp @800MHz 21 21 21 21 21 21 21 20 20 20 19 19 19 19 19 19 19 19 18 18 17 17 15 15 14 fL,Q [MHz] 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 All values on ceramic core. *All specifications are subject to change without notice. fres,min [MHz] 6000 6000 6000 6000 6000 5500 5500 5200 4800 4600 4000 3500 2800 2800 2500 2200 2000 1800 1800 1800 1800 1500 1500 1400 1200 D.C.R. max. [mΩ ] IN,max [mA] Tol. [%] 50 60 70 80 80 100 120 150 170 190 300 350 410 450 600 700 800 1200 1400 1700 2100 2500 4000 4500 5500 400 400 400 400 400 400 400 360 360 340 320 320 320 320 240 240 200 200 170 150 140 130 120 110 90 ±0,2 /0,3 nH ±0,2 /0,3 nH ±0,2 /0,3 nH ±0,2 /0,3 nH ±0,2 /0,3 nH ±0,2 /0,3 nH ±0,2 /0,3 nH ±0,2 /0,3 nH ±0,2 /0,3 nH ±0,2 /0,3 nH ±0,2 nH/ 5% ±0,2 nH / 5% 2%/5% 2%/5% 2%/5% 2%/5% 2%/5% 2%/5% 2%/5% 2%/5% 2%/5% 5% 5% 5% 5% Wire Wound Chip Inductors ——O-Series 0402(1005)/5514 Electrical Characteristic Curves Typical Inductance / Q factor vs. frequency Climatic category acc. to DIN IEC 68-1:55/125/56 Test equipment : Inductance and Q: Agilent 4291A+16096A. Resonant Frequency : Agilent 8720. D.C.R. : Burst Resistomat 2329.(at20℃) *All specifications are subject to change without notice. PAGE 3/3