Power Inductors <SMD Type: CDPH Series> Type: CDPH10D22 ◆ Product Description ・13.5×10.5mm Max.(L×W), 2.4mm Max. Height. ・Inductance range: 1.8～33μH ・Rated current range: 1.26～3.6 A ・Custom design is available. ◆ Feature ・Magnetically shielded construction. ・High current inductor ideally used in white LED high power supply. ・RoHS Compliance. ◆ Dimensions (mm) 2.4 Max. 10.6 4.8 10.5 Max. 13.5 Max. Surface mounting 2.25 Typ. 10.6 9.6 10.5 Max. 13.5 Max. 1.2 Max. Embedded mounting Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 Power Inductors <SMD Type: CDPH Series> Type: CDPH10D22 ◆ Land Pattern (mm) 1.5 10.5 11.0 10.5 10.4 7.0 1.8 11.0 Slit 14.0 14.0 In-board On-board PCB PCB (Surface mounting) (Part No. Without “B“) (Embedded mounting) (Part No. with “B“) ◆ Specification Part Name Stamp Inductance (μH)［Within］ 100kHz/1.0V CDPH10D22 (B) NP-1R8PC 1R8 1.80±25% 31 (25) Saturation Current (A) (Typ.) ※1 6.56 (8.20) CDPH10D22 (B) NP-2R7PC 2R7 2.70±25% 36 (29) 5.20 (6.50) 3.40(3.90) CDPH10D22 (B) NP-3R3PC 3R3 3.30±25% 41 (33) 4.48 (5.60) 3.00(3.40) CDPH10D22 (B) NP-4R7PC 4R7 4.70±25% 48 (38) 3.76(4.70) 2.94(3.37) CDPH10D22 (B) NP-5R6PC 5R6 5.60±25% 56 (45) 3.46(4.33) 2.60(3.00) CDPH10D22 (B) NP-7R5PC 7R5 7.50±25% 60 (48) 3.20 (4.00) 2.52(2.90) CDPH10D22 (B) NP-8R2PC 8R2 8.20±25% 69 (55) 2.88 (3.60) 2.36(2.72) CDPH10D22 (B) NP-100PC 100 10.0±25% 75 (60) 2.72 (3.40) 2.22(2.55) CDPH10D22 (B) NP-120PC 120 12.0±25% 125 (100) 2.50 (3.12) 1.74(2.00) CDPH10D22 (B) NP-150PC 150 15.0±25% 136 (109) 2.28 (2.85) 1.70(1.95) CDPH10D22 (B) NP-180PC 180 18.0±25% 146 (117) 2.03 (2.54) 1.67(1.91) CDPH10D22 (B) NP-200PC 200 20.0±25% 151 (121) 1.86(2.33) 1.57(1.80) CDPH10D22 (B) NP-220PC 220 22.0±25% 163 (130) 1.85(2.31) 1.53(1.77) CDPH10D22 (B) NP-240PC 240 24.0±25% 208 (166) 1.70(2.12) 1.33(1.52) CDPH10D22 (B) NP-270PC 270 27.0±25% 221 (177) 1.64 (2.05) 1.30(1.50) CDPH10D22 (B) NP-330PC 330 33.0±25% 256 (205) 1.50 (1.87) 1.26(1.44) D.C.R.(mΩ) Max. (Typ.) (at 20℃) Temperature Rise Current (A) (Typ.) ※2 3.60(4.20) ※1. Saturation Current: The DC current at which the inductance decreases to 70% of the nominal value. ※2. Temperature rise current: The DC current at which the temperature rise is △t＝40℃.(Ta＝20℃) ※ This spec is not the final revision, and some parts may be changed before production. Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2