General Power Transformer <SMD Type: CM Series> Type: CM-5 ◆ Product Description ・5.9×5.9mm Max.(L×W), 5.0mm Max. Height. ・Inductance range: 10μH∼5.6mH. ・Rated current range: 21mA∼490mA. ・5 Terminal pins’ type gives a flexible design as inductors or transformers. ・Custom design is available. ◆ Featurex ・Magnetically shielded construction. ・Ideally used in Notebook PC, LCD TV,DVD, Game machine, STB , Projector, Power supply module etc as DC-DC Converter inductors or transformers. ・RoHS Compliance. ◆ Dimensions (mm) ◆ Land Pattern (mm) ＋0.5 5.2−0.2 0.7±0.15 5.6±0.3 3.5±0.5 1. 0 4.0±0.5 4.6±0.4 4.4 ◆ 0.5±0.1 3.5 2.0 5.6±0.3 3.5±0.2 Specification (for transformers) Sample No. Inductance (6-4) Rate Current(6-4) 100KHz/0.1V (mA)※1 100µH +40％ -20％ 6301-T005 135 ※ Schematics (Bottom) “ S” is winding start. S 3 S 2 1 4 6 S Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 General Power Transformer <SMD Type: CM Series> Type: CM-5 ◆ Specification (for inductors) Part Name ※ CM5NP-100□ CM5NP-120□ CM5NP-150□ CM5NP-180□ CM5NP-220□ CM5NP-270□ CM5NP-330□ CM5NP-390□ CM5NP-470□ CM5NP-560□ CM5NP-680□ CM5NP-820□ CM5NP-101□ CM5NP-121□ CM5NP-151□ CM5NP-181□ CM5NP-221□ CM5NP-271□ CM5NP-331□ CM5NP-391□ CM5NP-471□ CM5NP-561□ CM5NP-681□ CM5NP-821□ CM5NP-102□ CM5NP-122□ CM5NP-152□ CM5NP-182□ CM5NP-222□ CM5NP-272□ CM5NP-332□ CM5NP-392□ CM5NP-472□ CM5NP-562□ Inductance (Tolerance +40%, -20%)[Within］ 10μH 12µH 15µH 18µH 22µH 27µH 33µH 39µH 47µH 56µH 68µH 82µH 100µH 120µH 150µH 180µH 220µH 270µH 330µH 390µH 470µH 560µH 680µH 820µH 1.0 mH 1.2 mH 1.5 mH 1.8 mH 2.2 mH 2.7 mH 3.3 mH 3.9 mH 4.7 mH 5.6 mH ※ Description of part name D.C.R.(Ω) [Max.](at 20℃) Rate Current (mA)※2 0.2 0.25 0.25 0.3 0.3 0.35 0.4 0.45 0.5 0.55 0.6 0.7 0.75 0.95 1.25 1.5 1.7 1.9 2.45 3.15 3.65 4.2 4.5 6.9 10 10.5 13 18 22 24 27.5 31 32 36 490 460 415 375 305 280 270 245 215 210 190 160 150 140 130 115 105 95 90 80 75 65 60 55 50 45 40 40 35 30 30 25 24 21 Measuring Frequency 2.52 MHz 1 kHz ※ Schematics (Bottom) S CM5NP-100□ “ S” is winding start. B Box C Carrier Tape 3 4 2 1 6 ※1.Rated current: The D.C. current at which the inductance decreases to 90% of it’s initial value or when △t=40℃, whichever is lower(Ta=20℃). Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2