IFT Coils < SMD Type: CP Series> Type: CP-4LBM ◆ Product Description ・6.0×5.1mm Max.,(L×W), 2.3mm Max. Height. ・Inductance range:10～560µH Max. ・Operating Frequency:15MHz Max. ・In addition to the reference versions of parameters shown here, custom designs are available to meet your exact requirements ◆ Feature ・Low profile fixed shielded type of tight-space design ・Ideally used as IFT coils or low power DC-DC converters transformers. ・RoHS Compliance 1.5±0.2 0.45 ＋0.3 4.8－0.2 0.45 2.3 Max. 1.5±0.2 ＋0.3 4.8－0.2 0.4±0.2 1.2±0.15 0.95 3.8 3.4±0.3 ◆ Dimensions (mm) 0.95 ＊ Dimension does not include solder used on coil. ＊ Pin pitch shall be measured at the root of terminal. ＊ Dimension without tolerance are approx. ◆ Connection (Bottom View) 3 4 2 S 1 6 “S” is winding start Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 IFT Coils < SMD Type: CP Series> Type: CP-4LBM ◆ Specification NO. Part No. Stamp Inductance (at 1kHz) <Within> Rated Current (mA) ※ D.C.R. (Ω) <Max.> (at 2℃) 01 CP4LBMNP-1ØØM 100 10μH ± 20 % 360 0.90 02 CP4LBMNP-12ØM 120 12μH ± 20 % 335 1.00 03 CP4LBMNP-15ØM 150 15μH ± 20 % 305 1.10 04 CP4LBMNP-18ØM 180 18μH ± 20 % 280 1.30 05 CP4LBMNP-22ØM 220 22μH ± 20 % 275 1.50 06 CP4LBMNP-27ØM 270 27μH ± 20 % 255 1.60 07 CP4LBMNP-33ØM 330 33μH ± 20 % 245 1.80 08 CP4LBMNP-39ØM 390 39μH ± 20 % 225 2.00 09 CP4LBMNP-47ØM 470 47μH ± 20 % 220 2.20 10 CP4LBMNP-56ØM 560 56μH ± 20 % 210 2.50 11 CP4LBMNP-68ØM 680 68μH ± 20 % 185 3.00 12 CP4LBMNP-82ØM 820 82μH ± 20 % 165 3.60 13 CP4LBMNP-1Ø1M 101 100μH ± 20 % 130 6.40 14 CP4LBMNP-121M 121 120μH ± 20 % 120 7.70 15 CP4LBMNP-151M 151 150μH ± 20 % 115 8.70 16 CP4LBMNP-181M 181 180μH ± 20 % 110 9.50 17 CP4LBMNP-221M 221 220μH ± 20 % 100 10.50 18 CP4LBMNP-271M 271 270μH ± 20 % 95 12.20 19 CP4LBMNP-331M 331 330μH ± 20 % 85 14.00 20 CP4LBMNP-391M 391 390μH ± 20 % 75 16.10 21 CP4LBMNP-471M 471 470μH ± 20 % 70 19.60 22 CP4LBMNP-561M 561 560μH ± 20 % 60 22.00 ※ Rated current: The DC current at which the inductance decreases by 90% of its initial value or or when △t=40℃, whichever is lower(Ta=20℃). Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2