Filter Coils < Pin Type: HR Series> Sample submission is forbidden Type: HR-5T ◆ Product Description ・17.1×5.9mm Max.(L×W), 9.5mm Max. Height. ・Reference operating frequency range:200~1100MHz ・In addition to the reference versions of parameters shown here, custom designs are available to meet your exact requirements ◆ Feature ・Variable shielded type with three individual coils combined. ・Super high frequency Helical Filters. ・Ideally used in mobile communication equipment(Cellular,cordless telephone,paging devices) ・RoHS Compliance ◆ Dimensions (mm) Max. * Dimension does not include solder used on coil. * Pin pitch should be measured at the root of terminal. ◆ Testing circuit OU T IN 1st 2nd 3rd Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 Filter Coils < Pin Type: HR Series> Type: HR-5T ◆ Specification (Part No: 2582-T090) Specification Item Input impedance Output impedance (Rin) (Rout) 50O 50O Center frequency Fo 358MHz Attenuation Fo-50MHz Fo+50MHz Band width (-3dB) Insertion loss 358MHz 32dB Min. 30dB Min. 16MHz Min(24MHz,Typ.) 5.0dB Max. Frequency Response (Attenuation 0dB at 358MHz ) Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2