IFT Coils < Pin Type: P-7 Series> Type: P-7SBJ/F M, P-7SBJ/AM, P-7SBJ/SW, P-7SBJ/MW ◆ Product Description ・7.8×7.8mm Max.(L×W), 12.5mm Max. Height. ・Inductance:1~680µH. ・Operating frequency:20MHz Max. ・In addition to the reference versions of parameters shown here, custom designs are available to meet your exact requirements ◆ Feature ・Variable shielded type. ・FM, AM,SW,MW types are available. ・Internally assembled condenser is available. ・Ideally used in Radio(FM, AM,SW,MW),TV. Transceiver ・RoHS Compliance ◆ Dimensions (mm) φ4.0 7.7 4.5±0.2 7.5±0.3 ※ +0.1 φ0.5-0.05 3.5±0.5 4.5±0.2 7.5±0.3 +1.0 3.0 -0.5 12.0±0.5 ＊ Dimension does not include solder used on coil. ＊ Pin pitch shall be measured at the root of terminal. ◆ Connection (Bottom View) S ③ ④ ③ ② ① ③ ④ ② ② ⑥ S P-7SBJ/FW,P-7SBJ /AW S ① ④ ⑥ P-7SBJ /SW S ① ⑥ P-7SBJ /MW “S” is winding start Please refer to the sales offices on our website for a representative near you www.sumida.com 1/1 IFT Coils < Pin Type: P-7 Series> Type: P-7SBJ/F M, P-7SBJ/AM, P-7SBJ/SW, P-7SBJ/MW ◆ Specification (P-7SBJ/FM) (Part No.: S0995568) Item Frequency （１−３） Measuring Conditions 10.7MHz±2% Variable Tuning Capacity(Int.) Unloaded Qu ◆ Specification( P-7SBJ/AM) Item Frequency 56 pF±5% 55 Min. (Part No.:S0995566) （１−３） 4５５kHz± 3％ Tuning Capacity(Int.) Unloaded Qu ◆ Specification (P-7SBJ /SW) Item Inductance Unloaded Qu 10.7MHz Measuring Conditions Variable 330 pF±１0％ 60 Min. 4５５kHz (Part No.:S0995584) （１−３） Measuring Condition 4.2 μＨ± 5％ Variable 7.96MHz 105±12% Within 7.96MHz ◆ Specification (P-7SBJ /MW) (Part No.: S193018) Item Inductance （１−３） 268μＨ ± 8％ Unloaded Qu Variable 93 Min. Measuring Condition ７９６KHz ７９６KHz Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2