GPA1601 - GPA1607 16.0 AMPS. Glass Passivated Rectifiers TO-220AC .185(4.70) .175(4.44) .412(10.5) MAX .113(2.87) .103(2.62) Features .27(6.86) .23(5.84) .594(15.1) .587(14.9) Glass passivated chip junction. High efficiency, Low VF High current capability High reliability High surge current capability Low power lossy PIN1 2 .16(4.06) .14(3.56) .11(2.79) .10(2.54) .56(14.22) .53(13.46) .037(0.94) .027(0.68) Mechanical Data .055(1.40) .045(1.14) DIA .154(3.91) .148(3.74) .025(0.64) .014(0.35) .205(5.20) .195(4.95) Cases: TO-220AC molded plastic Epoxy: UL 94V-0 rate flame retardant Terminals: Pure tin plated, lead free. solderable per MIL-STD-202, Method 208 guaranteed Polarity: As marked High temperature soldering guaranteed: o 260 C /10 seconds .16”,(4.06mm) from case. Weight: 2.24 grams PIN 1 PIN 2 CASE Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length @TC = 100 oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @16.0A Symbol GPA GPA GPA GPA GPA GPA GPA Units 1601 1602 1603 1604 1605 1606 1607 VRRM 50 100 200 400 600 800 1000 V VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V I(AV) 16.0 A IFSM 250 A VF 1.1 V 10 250 100 2.0 - 65 to + 150 uA uA pF o C/W o C o Maximum DC Reverse Current @ TC=25 C at Rated DC Blocking Voltage @ TC=125 oC Typical Junction Capacitance ( Note 1 ) Typical Thermal Resistance (Note 2) IR Cj RθJC Operating and Storage Temperature Range TJ ,TSTG 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. Notes: 2. Thermal Resistance from Junction to Case Mounted on Heatsink size 2” x 3” x 0.25” Al-Plate. Version: A06 RATINGS AND CHARACTERISTIC CURVES (GPA1601 THRU GPA1607) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE FIG.2- TYPICAL REVERSE CHARACTERISTICS 100 16 40 14 12 Single Phase Half Wave 60Hz Resistive of Inductive Load 10 8 0 50 100 150 o CASE TEMPERATURE. ( C) INSTANTANEOUS REVERSE CURRENT. ( A) AVERAGE FORWARD CURRENT. (A) 18 FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 10 Tj=125 0C 4 2 1.0 Tj=25 0C 0.4 0.2 PEAK FORWARD SURGE CURRENT. (A) 350 0.1 300 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 250 200 8.3ms Single Half Sine Wave JEDEC Method 150 100 FIG.5- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 50 400 0 1 2 5 10 20 50 100 200 NUMBER OF CYCLES AT 60Hz INSTANTANEOUS FORWARD CURRENT. (A) 100 FIG.4- TYPICAL JUNCTION CAPACITANCE 120 JUNCTION CAPACITANCE.(pF) 100 80 Tj=25 0C 60 40 40 20 10 4 2 1 Tj=25oC Pulse Width=300 s 1% Duty Cycle 0.4 20 0.2 0 1 5 10 50 100 REVERSE VOLTAGE. (V) 500 1000 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 FORWARD VOLTAGE. (V) Version: A06