KBL401G THRU KBL407G Single Phase 4.0 AMPS. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 4.0 Amperes KBL Features aUL Recognized File # E-96005 aGlass passivated junction aIdeal for printed circuit board aReliable low cost construction aHigh surge current capability aHigh temperature soldering guaranteed: 250 / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs. ( 2.3 Kg ) tension aLeads solderable per MIL-STD-202, Method 208 Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% KBL KBL KBL KBL Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage 401G 402G 403G 404G KBL 405G KBL 406G KBL 407G Units 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V Maximum Average Forward Rectified Current @TA = 50 Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 4.0A Maximum DC Reverse Current @ TA=25 at Rated DC Blocking Voltage @ TA=125 Typical Thermal Resistance (Note) RθJA RθJL Operating Temperature Range TJ Storage Temperature Range TSTG 4.0 A 150 A 1.1 V 10 500 19 2.4 -55 to +150 -55 to +150 uA uA /W Note: Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted onP.C.B. With 0.47 x 0.47” (12 x 12mm) Copper Pads. - 492 - RATINGS AND CHARACTERISTIC CURVES (KBL401G THRU KBL407G) FIG.1- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT. (A) PEAK FORWARD SURGE CURRENT. (A) 5 250 150 100 50 0 1 100 10 4 3 2 1 0 1000 0 50 NUMBER OF CYCLES AT 60Hz FIG.4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER BRIDGE ELEMENT 1.0 0.1 0 Tj=25 C PULSE WIDTH-300 S 1% DUTY CYCLE .6 .8 1.0 1.2 100 INSTANTANEOUS REVERSE CURRENT. ( A) INSTANTANEOUS FORWARD CURRENT. (A) 10.0 0.01 .4 150 100 o AMBIENT TEMPERATURE. ( C) 1.4 TJ=125 0C 10 1 TJ=25 0C 0.1 1.6 INSTANTANEOUS FORWARD VOLTAGE. (V) 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) - 493- 140