MBRS1535CT - MBRS15150CT 15.0 AMPS. Surface Mount Schottky Barrier Rectifiers D2PAK Features For surface mounted application Plastic material used carries Underwriters Laboratory Classifications 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Guardring for transient protection Higho temperature soldering guaranteed: 260 C/10 seconds, at terminals Mechanical Data Dimensions in inches and (millimeters) 2 Cases: JEDEC D PAK molded plastic body Terminals: Pure tin plated, lead free. solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting position: Any Mounting torque: 5 in. - lbs. max Weight: 0.06 ounce,1.70 grams Maximum Ratings and Electrical Characteristics o Rating at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol MBRS MBRS MBRS MBRS MBRS MBRS MBRS Units Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TC=105oC Peak Repetitive Forward Current (Rated VR, Square Wave, o 20KHz) at Tc=105 C Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Peak Repetitive Reverse Surge Current (Note 1) Maximum Instantaneous Forward Voltage at (Note 2) o IF=7.5A, Tc=25 C IF=7.5A, Tc=125oC o IF=15A, Tc=25 C IF=15A, Tc=125oC o Maximum Instantaneous Reverse Current @ Tc=25 C at Rated DC Blocking Voltage (Note 2) @ Tc=125 oC VRRM VRMS VDC I(AV) 1560 CT 1590 CT 15100 15150 CT CT 35 45 50 60 90 100 150 V 24 31 35 42 63 70 105 V 35 45 50 60 90 100 150 V IFRM 15.0 A IFSM IRRM 150 1.0 VF IR dV/dt RθJA RθJC TJ TSTG Notes: 1550 CT A Maximum Thermal Resistance Per Leg (Note 3) Storage Temperature Range 1545 CT 15 Voltage Rate of Change (Rated VR) Operating Junction Temperature Range 1535 CT - 0.57 0.84 0.72 0.75 0.65 - - 0.1 15.0 0.1 10 1,000 - 60 - A 0.92 0.82 - - 50 2.0 1. 2.0us Pulse Width, f=1.0 KHz 2. Pulse Test: 300us Pulse Width, 1% Duty Cycle 3. Mounted on Heatsink Size of 2 in x 3 in x 0.25 in Al-Plate.t A 0.5 0.95 0.92 - - 0.1 5.0 V mA mA V/uS o C/W -65 to +150 o -65 to +175 o C C Version: C07 RATINGS AND CHARACTERISTIC CURVES (MBRS1535CT THRU MBRS15150CT) FIG.1- FORWARD CURRENT DERATING CURVE FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER LEG 300 RESISTIVE OR INDUCTIVE LOAD PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) 25 20 15 10 5 Tj=Tj max. 8.3ms Single Half Sine Wave JEDEC Method 250 200 150 100 50 0 0 0 50 100 150 1 100 10 o CASE TEMPERATURE. ( C) NUMBER OF CYCLES AT 60Hz FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG FIG.4- TYPICAL REVERSE CHARACTERISTICS PER LEG 50 40 10 Tj=125 0C INSTANTANEOUS REVERSE CURRENT. (mA) INSTANTANEOUS FORWARD CURRENT. (A) 10 Pulse Width=300 s 1% Duty Cycle 1 Tj=25 0C 0.1 MBRS1535CT-MBRS1545CT MBRS1550CT-MBRS1560CT MBRS1590CT-MBRS15150CT Tj=125 0C 1 0.1 Tj=75 0C MBRS1535CT-MBRS1545CT MBRS1550CT-MBRS15150CT 0.01 Tj=25 0C 0.01 0 0.001 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 FORWARD VOLTAGE. (V) FIG.6- TYPICAL TRANSIENT THERMAL CHARACTERISTICS PER LEG FIG.5- TYPICAL JUNCTION CAPACITANCE PER LEG 100 TRANSIENT THERMAL IMPEDANCE. ( OC/W) JUNCTION CAPACITANCE.(pF) 4,000 Tj=25 0C f=1.0MHz Vsig=50mVp-p 1,000 100 40 MBRS1535CT-MBRS1545CT MBRS1550CT-MBRS1560CT MBRS1590CT-MBRS15150CT 10 0.1 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 1 10 REVERSE VOLTAGE. (V) 100 10 1 0.1 0.01 0.1 1 10 T, PULSE DURATION. (sec) Version: C07 100