UTC-IC 81XX-AF5-A-R

UNISONIC TECHNOLOGIES CO., LTD
81XX
LINEAR INTEGRATED CIRCUIT
POWER RESET IC
3
DESCRIPTION
1
2
The function of UTC 81XX is to accurately reset system after
detecting the supply voltage at the time of switching power on and
instantaneous power off in various CPU and other logic systems.
Further, this IC, with its super low consumption current and high
precision voltage detection capacity, is most suited as a voltage
check circuit for a number of products which use batteries.
1
TO-92
SOT-23
3
2
1
1
5
4
FEATURES
SOT-25
*High precision voltage detection. (VSS±3% max)
*low current consumption.
(ICCH=15µA typ. ICCL=10µA typ.)
*Low operating threshold voltage (0.65V typ.)
*Hystresis voltage is provided as a detect voltage.
(50mV typ.)
*Large output current at the time ON (15mA typ.)
*The detect voltage can be selected at your discretion at 0.1V step
within the range of 1.9V to 4.6V by the following stipulation method.
SOT-89
*Pb-free plating product number: 81XX L
ORDERING INFORMATION
Order Number
Package
Normal
Lead Free Plating
81XX-AB3-D-R
81XXL-AB3-D-R
SOT-89
81XX-AE3-2-R
81XXL-AE3-2-R
SOT-23
81XX-AE3-3-R
81XXL-AE3-3-R
SOT-23
81XX-AE3-5-R
81XXL-AE3-5-R
SOT-23
81XX-AF5-A-R
81XXL-AF5-A-R
SOT-25
81XX-AF5-B-R
81XXL-AF5-B-R
SOT-25
81XX-T92-D-B
81XXL-T92-D-B
TO-92
81XX-T92-D-K
81XXL-T92-D-K
TO-92
81XX-T92-E-B
81XXL-T92-E-B
TO-92
81XX-T92-E-K
81XXL-T92-E-K
TO-92
Note: Pin Assignment:
I: VCC O: VOUT G: GND
XX: detected voltage value
Pin Assignment
1
2
3
4
5
I
G
O
I
O
G
O
G
I
G
O
I
NC NC G
O
I
O
I
G
NC NC
I
G
O
I
G
O
O
I
G
O
I
G
-
Packing
Tape Reel
Tape Reel
Tape Reel
Tape Reel
Tape Reel
Tape Reel
Tape Box
Bulk
Tape Box
Bulk
81XXL-AB3-D-R
(1)Packing Type
(2)Pin Assignment
(3)Package Type
(4)Lead Plating
www.unisonic.com.tw
Copyright © 2005 Unisonic Technologies Co., Ltd
(1) B: Tape Box, K: Bulk, R: Tape Reel
(2) refer to Pin Assignment
(3) AB3: SOT-89, AF5: SOT-25, AE3: SOT-23,
T 92: TO-92
(4) L: Lead Free Plating, Blank: Pb/Sn
1 of 6
QW-R119-001,J
81XX
LINEAR INTEGRATED CIRCUIT
MARKING INFORMATION
PACKAGE
MARKING
PACKAGE
MARKING
3
SOT-23
DATE
CODE
VOLTAGE
CODE
PIN CODE
2
3
SOT-25
SOT-89
DATE
CODE
1
DATE
CODE
VOLTAGE
CODE
PIN CODE
4
VOLTAGE
CODE
1 2 3
1
2
81XX
TO-92
UTC
81XX
DATE
CODE
PIN CODE
5
1
2
3
BLOCK DIAGRAM
VCC
OP1
+
-
C01
+
-
OUT
GND
The Pin2 this product is SUB, so connect the pin to Ground.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 6
QW-R119-001,J
81XX
LINEAR INTEGRATED CIRCUIT
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
RATINGS
UNIT
Power supply voltage
VCC
-0.3~+10
V
Operating temperature
TOPR
-20~+75
°C
Storage temperature
TSTG
-40~+125
°C
Note Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
ELECTRICAL CHARACTERISTICS
(Ta=25°C, The unit of resistance is Ω unless otherwise indicated.)
PARAMETER
SYMBOL
(*1)
TEST CONDITIONS
UTC 8150
UTC 8146
UTC 8145
UTC 8144
UTC 8143
UTC 8142
UTC 8141
UTC 8140
UTC 8139
UTC 8138
UTC 8137
UTC 8136
UTC 8135
UTC 8134
RL=470Ω
UTC 8133
VCC=H->L
Detection Voltage
VSS
1
UTC 8132
VOUT=VCC
UTC 8131
UTC 8130
UTC 8129
UTC 8128
UTC 8127
UTC 8126
UTC 8125
UTC 8124
UTC 8123
UTC 8122
UTC 8121
UTC 8120
UTC 8119
UTC 8118
RL=470Ω, VCC=L->H->L,
Hysteresis Voltage
∆VSS
1
VOUT=VCC
RL=470Ω, Ta=-20~+75°C
Detection Voltage Temperature
VSS/∆T
1
Coefficient
VOUT=VCC
VCC=VSS min.-0.05V,
Low Level Output Voltage
VOL
1
RL=470Ω
Output Leakage Current
IOH
2
VCC=10V , VOUT=VCC
Circuit Current at ON Time
ICCL
3
VCC=VSS min.-0.05V, RL=∞
Circuit Current at OFF Time
ICCH
3
VCC=VSS typ./0.85, RL=∞
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
4.850
4.462
4.365
4.268
4.171
4.074
3.977
3.880
3.783
3.686
3.589
3.492
3.395
3.298
3.201
3.104
3.007
2.910
2.813
2.716
2.619
2.522
2.425
2.328
2.231
2.134
2.037
1.940
1.843
1.746
TYP
5.000
4.600
4.500
4.400
4.300
4.200
4.100
4.000
3.900
3.800
3.700
3.600
3.500
3.400
3.300
3.200
3.100
3.000
2.900
2.800
2.700
2.600
2.500
2.400
2.300
2.200
2.100
2.000
1.900
1.800
MAX
5.150
4.738
4.635
4.532
4.429
4.326
4.223
4.120
4.017
3.914
3.811
3.708
3.605
3.502
3.399
3.296
3.193
3.090
2.987
2.884
2.781
2.678
2.575
2.472
2.369
2.266
2.163
2.060
1.957
1.854
UNIT
30
50
100
mV
±0.01
V
%/°C
0.2
0.4
V
3
3
±0.1
5
5
µA
µA
µA
3 of 6
QW-R119-001,J
81XX
LINEAR INTEGRATED CIRCUIT
ELECTRICAL CHARACTERISTICS(Cont.)
PARAMETER
“H” Transmission Delay Time
“L” Transmission Delay Time
Operating Threshold Voltage
SYMBOL
TpLH (*2)
TpHL (*3)
VOPL
(*1)
4
4
1
Output current at ON Time 1
IOL1
2
Output current at ON Time 2
IOL2
2
TEST CONDITIONS
CL=100pF, RL=4.7KΩ
CL=100pF, RL=4.7kΩ
RL=4.7kΩ, VOL≦0.4V
RL=0, VCC=Vs min.-0.05V,
VOUT=0.4V
Ta=-20~+75°C
RL=0, VCC=VSS min.-0.15V
VOUT=0.4V
MIN
TYP
20
20
0.65
MAX
60
60
0.85
UNIT
µS
µS
V
5
mA
3
mA
Note:
(*1) MEASUREMENT CIRCUIT
(*2) TpLH: VCC=(VSS Typ. –0.4V) -> (VSS Typ. +0.4V)
(*3) TpHL: VCC=(VSS Typ. +0.4V) -> (VSS Typ. -0.4V)
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 6
QW-R119-001,J
81XX
LINEAR INTEGRATED CIRCUIT
MEASURING CIRCUITS
1)
RL
2)
UTC 81XX
UTC 81XX
V CC
VCC
V1
V CC
V OUT
VCC
GND
+10μF
V1
V2
/10V
+10μF
A
V OUT
GND
V2
/10V
VOUT
3)
UTC
VCC 81XX VOUT
A
V CC
+10μF
V
GND
/10V
4)
RL = 4.7K
VCC
INPUT
PULSE
0.2UF
GND
NOTE:
1.) A: DC AMMETER
2.) INPUT PULSE
10μF
/10V
UTC
V OUT
81XX
V: DC VOLTMETER
CL
+
5.0V
CRT
CRT: OSCILLOSCOPE
VsTyp. +0.4V
VsTyp. -0.4V
0V
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 6
QW-R119-001,J
81XX
LINEAR INTEGRATED CIRCUIT
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
6 of 6
QW-R119-001,J