.100" LATCH HEADER .100" X .100" [2.54 X 2.54] CENTERLINE Adam Technologies, Inc. MHR SERIES MHR Latch Options STRAIGHT PCB MOUNT A .100 [2.54] .443 [11.27] A = .100 [2.54] x No. of Spaces + .860 [21.84] B = .100 [2.54] x No. of Spaces + .460 [11.68] C = .100 [2.54] x No. of Spaces .331 [8.40] .921 [23.40] .025 [0.64] SQ. Header with Short Ejector/Latch for Sockets without Strain Reliefs .171 [4.35] .677 [17.20] 1.094 [27.80] .578 [14.70 .134 [3.40] .100 [2.54] C B Header with Long Ejector/Latch for Sockets with Strain Reliefs MHR RIGHT ANGLE PCB MOUNT A C .331 [8.40] .100 [2.54] A = .100 [2.54] x No. of Spaces + .860 [21.84] B = .100 [2.54] x No. of Spaces + .460 [11.68] C = .100 [2.54] x No. of Spaces .025 [0.64] SQ. .171 [4.35] .921 [23.40] .677 [17.20] .100 [2.54] .157 [4.00] B C ø.040 [1.02] .100 [2.54] .100 [2.54] Recommended PCB Layout 909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAM-TECH.COM 263