Document 526 -1 Chip Inductors - 0402HP Series (1005) •Higher Q and lower DCR than other 0402 inductors •Very high SRF values – as high as 16 GHz •Excellent current handling capability – up to 2300 mA •52 inductance values from 1.0 to 220 nH E terminal I G J F I Terminal wraparound: approx 0.007/0,18 both ends Recommended Land Pattern 0402HP A max 0.043 1,09 B (min – max) 0.020 – 0.028 0,51 – 0,71 C max 0.024 0,61 inches mm 0402HPH A max 0.044 1,12 B 0.026 ±0.002 0,66 ±0,051 C max 0.026 0,66 inches mm Current Derating 120 110 100 D E FGH IJ 0.0100.020 0.0080.0240.026 0.014 0.020inches 0,250,51 0,200,610,66 0,36 0,51mm Note: Height dimension (C) is before optional solder application. For maximum height dimension including solder, add 0.006 in / 0,152 mm. 90 80 70 60 50 40 30 25°C F A H Pick and place material D Percent of rated Irms C B overall Core material Ceramic Environmental RoHS compliant, halogen free optional Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 0.7 – 1.0 mg Ambient temperature –40°C to +125°C with Irms current, +125°C to +140°C with derated current Storage temperature Component: –40°C to +140°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging 2000 or 5000 per 7″ reel. Paper tape: 8 mm wide, 0.66 mm thick, 2 mm pocket spacing PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf 20 10 0 -40 -20 0 20 40 60 80 100 120 140 Ambient temperature (°C) 120 110 100 90 80 70 60 50 40 30 20 10 0 Typical L vs Frequency 2.0 nH 80 11 nH 70 27 nH 60 39 nH 51 nH 68 nH Inductance (nH) Q Factor Typical Q vs Frequency 68 nH 51 nH 50 39 nH 40 30 27 nH 20 11 nH 10 1 10 100 1000 Frequency (MHz) 10000 0 2.0 nH 1 10 US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] 100 1000 10000 Frequency (MHz) Document 526-1 Revised 08/08/13 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 526-2 0402HP Series (1005) Designer’s Kits C403A and B contain 20 each of 5% values Designer’s Kits C403A-2 and B-2 contain 20 each of 2% values 900 MHz 1.7 GHz Inductance2 Percent Test freq SRF typ5 DCR max6 Irms7 Part number1(nH) tolerance3 (MHz) L typ Q typ4 L typ Q typ4 (GHz) (Ohms)(mA) 0402HP-1N0XJL_1.0 5 250 0.97 46 0.9972 16.0 0.0302300 0402HP-2N0XJL_2.0 5 250 1.96 58 1.9885 15.2 0.0382100 0402HP-2N2XJL_2.2 5 250 2.17 60 2.1786 15.1 0.0382100 0402HP-2N4X_L_2.4 5,3,2 250 2.37 60 2.3883 14.0 0.0422000 0402HP-2N7X_L_2.7 5,3,2 250 2.66 62 2.6885 13.0 0.0851500 0402HP-3N3X_L_3.3 5,3,2 250 3.26 66 3.2895 12.8 0.0451700 0402HP-3N6X_L_3.6 5,3,2 250 3.56 65 3.5894 11.7 0.0451700 0402HP-3N9X_L_3.9 5,3,2 250 3.87 64 3.9198 9.50 0.0451700 0402HP-4N3X_L_4.3 5,3,2 250 4.26 63 4.3390 7.15 0.0501600 0402HP-4N7X_L_4.7 5,3,2 250 4.67 58 4.7483 6.85 0.0751500 0402HP-5N1X_L_5.1 5,3,2 250 5.07 54 5.1676 6.80 0.1251200 0402HP-5N6X_L_5.6 5,3,2 250 5.56 73 5.66105 6.50 0.055 1600 0402HP-6N2X_L_6.2 5,3,2 250 6.18 73 6.25100 5.80 0.055 1600 0402HP-6N8X_L_6.8 5,3,2 250 6.78 68 6.9794 5.80 0.0701500 0402HP-7N5X_L_7.5 5,3,2 250 7.49 60 7.7782 5.40 0.1001400 0402HP-8N2X_L_8.2 5,3,2 250 8.10 68 8.4095 5.40 0.0651500 0402HP-8N7X_L_8.7 5,3,2 250 8.73 66 9.0495 5.00 0.0701500 0402HP-9N0X_L_9.0 5,3,2 250 8.99 67 9.2192 5.00 0.0801400 0402HP-9N5X_L_9.5 5,3,2 250 9.52 64 9.9790 4.70 0.0901400 0402HP-10NX_L_10 5,3,2 250 9.9862 10.490 4.700.110 1300 0402HP-11NX_L_11 5,3,2 250 11.0 68 11.698 4.700.065 1400 0402HP-12NX_L_12 5,3,2 250 12.0 66 12.6100 4.40 0.1001200 0402HP-13NX_L_13 5,3,2 250 13.1 62 13.982 4.200.155870 0402HP-15NX_L_15 5,3,2 250 15.1 62 16.085 3.900.115 1100 0402HP-16NX_L_16 5,3,2 250 16.2 57 17.377 3.700.150850 0402HP-18NX_L_18 5,3,2 250 18.2 58 19.574 3.550.120900 0402HP-19NX_L_19 5,3,2 250 19.2 61 20.788 3.500.145850 0402HP-20NX_L_20 5,3,2 250 20.3 58 22.076 3.500.185780 0402HP-21NX_L_21 5,3,2 250 21.3 48 23.262 1.700.460450 0402HP-22NX_L_22 5,3,2 250 22.3 60 24.474 3.300.160800 0402HP-23NX_L_23 5,3,2 250 23.3 60 25.577 3.300.160800 0402HP-24NX_L_24 5,3,2 250 24.5 55 27.171 3.150.210700 0402HP-25NX_L_25 5,3,2 250 25.5 57 28.373 3.150.260700 0402HP-26NX_L_26 5,3,2 250 26.6 56 29.374 3.150.290700 0402HP-27NX_L_27 5,3,2 250 27.3 62 29.586 3.200.350450 0402HP-30NX_L_30 5,3,2 250 30.8 61 35.087 2.900.350450 0402HP-33NX_L_33 5,3,2 250 34.0 61 38.380 2.800.330490 0402HP-36NX_L_36 5,3,2 250 37.1 59 42.276 2.800.390480 0402HP-37NX_L_37 5,3,2 250 38.2 57 44.072 2.700.480470 0402HP-39NX_L_39 5,3,2 250 40.5 56 47.084 2.600.430450 0402HP-40NX_L_40 5,3,2 250 41.3 56 47.475 2.600.430450 0402HP-43NX_L_43 5,3,2 250 45.0 52 54.168 2.500.520450 0402HP-47NX_L_47 5,3,2 250 49.0 48 58.962 2.400.580420 0402HP-51NX_L_51 5,3,2 250 49.1 52 58.859 2.300.700360 0402HPH-56NX_L_56 5,3,2 250 58.8 56 72.264 2.070.900330 0402HPH-68NX_L_68 5,3,2 250 72.2 56 91.464 1.841.00 320 0402HPH-82NX_L_82 5,3,2 250 89.7 52––1.75 1.10 315 0402HPH-R10X_L_100 5,3,2 250 – –––1.58 1.20 310 0402HPH-R12X_L_120 5,3,2 250 – –––1.25 1.20 310 0402HPH-R15X_L_150 5,3,2 100 – –––1.14 2.0240 0402HPH-R18X_L_180 5,3,2 100 – –––1.08 2.1240 0402HPH-R22X_L_220 5,3,2 100 – –––0.96 3.1160 1. When ordering, specify tolerance, termination and packaging codes: 0402HP-82NXJLW Tolerance: G=2% H = 3% J = 5% (Table shows stock tolerances in bold.) Termination:L=RoHS compliant silver-palladium-platinum-glass frit. E=Halogen free component. RoHS compliant silverpalladium-platinum-glass frit terminations. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging:W =7″ machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). Q =7″ machine-ready reel. EIA-481 punched paper tape (5000 parts per full reel). U=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead. 2. Inductance measured at test frequency using a Coilcraft SMD-F fixture in an Agilent/HP 4286 impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured using an Agilent/HP 4287A with an Agilent/HP 16197 test fixture. 5. SRF measured using an Agilent/HP 8722ES network analyzer and a Coilcraft SMD-D test fixture. 6. DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test fixture. 7. Current that causes a 15°C temperature rise from 25°C ambient. 8. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 526-2 Revised 08/08/13 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.