0805 CHIP INDUCTORS High-Reliability Chip Inductors ML336RAD The ML336RAD inductors provide exceptional Q values, even at high frequencies. They have a ceramic body and wire wound construction to provide the highest SRFs, tight inductance tolerance and batch consistency. This robust version of Coilcraft’s standard 0805HQ series features high temperature materials that allow operation in ambient temperatures up to 155°C. Inductance2 Percent SRF min4 DCR max5 Imax (nH)tolerance Q min3 (GHz) (Ohms)(A) Part number1 ML336RAD2N5JLZ ML336RAD5N6JLZ ML336RAD6N2JLZ ML336RAD12NJLZ ML336RAD16N_LZ ML336RAD18N_LZ ML336RAD20N_LZ ML336RAD27N_LZ ML336RAD30N_LZ ML336RAD39N_LZ ML336RAD48N_LZ ML336RAD51N_LZ 2.5@ 250 MHz 5.6@ 250 MHz 6.2@ 250 MHz 12@ 250 MHz 16@ 250 MHz 18@ 250 MHz 20@ 250 MHz 27@ 250 MHz 30@ 250 MHz 39@ 250 MHz 48@ 200 MHz 51@ 200 MHz 5 5 5 5 5,2 5,2 5,2 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 1. When ordering, please specify tolerance and testing codes: ML336RAD51NGLZ Tolerance: F =1% G = 2% J = 5% Testing:Z =COTS H=Screening per Coilcraft CP-SA-10001 N =Screening per Coilcraft CP-SA-10003 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP 4286 impedance analyzer or equivalent with Coilcraft-provided correlation pieces. 3. Q measured at the same frequency as inductance using an Agilent/HP 4291A with an Agilent/HP 16197 test fixture or equivalents. 4. SRF measured using an Agilent/HP 8753ES network analyzer or equivalent and a Coilcraft SMD-D test fixture. 5. DCR measured on a Keithley 580 micro-ohmmeter or equivalent and a Coilcraft CCF858 test fixture. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. 56 @ 1000 MHz 83 @ 1000 MHz 80 @ 1000 MHz 52 @ 500 MHz 72 @ 500 MHz 70 @ 500 MHz 54 @ 250 MHz 58 @ 250 MHz 50 @ 250 MHz 53 @ 250 MHz 44 @ 150 MHz 36 @ 150 MHz >5.00 4.88 4.55 2.80 2.40 2.20 2.05 2.00 1.74 1.60 1.40 1.28 2.0 1.9 1.8 1.6 1.4 1.4 1.4 1.3 1.1 1.0 1.1 0.9 Core material Ceramic Terminations RoHS compliant silver-palladium-platinum-glass frit. Ambient temperature –55°C to +125°C with Imax current, +125°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +155 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 2000 per 7″ reel Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.65 mm pocket depth Document ML197-1 Revised 11/06/12 ® © Coilcraft, Inc. 2012 0.020 0.035 0.035 0.045 0.060 0.060 0.060 0.070 0.095 0.110 0.095 0.120 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. 0805 CHIP INDUCTORS ML336RAD Series (0805) Typical Q vs Frequency Typical L vs Frequency 70 140 6.2 nH 16 nH 120 48 nH 60 2.5 nH 80 Inductance (nH) Q Factor 100 20 nH 30 nH 60 48 nH 40 50 20 10 0 0 100 1000 5000 20 nH 30 20 10 30 nH 40 16 nH 6.2 nH 2.5 nH 10 1 Frequency (MHz) Irms Derating B overall 120 100 A 90 80 E terminal 70 60 30 1000 5000 H Pick and place material I G J F I D Terminal wraparound: approx 0.015/0,38 both ends Suggested Recommended LandPattern Pattern Land ABCD maxmaxmax ref E F G H IJ 0.0900.0680.0600.0200.0500.0200.0400.0700.0400.030inches 2,291,731,520,511,270,511,021,781,020,76 mm 50 25°C Percent of rated Irms C F 110 40 100 Frequency (MHz) 20 10 0 -55 -40 -20 0 20 40 60 80 100 120 140 160 Ambient temperature (°C) Document ML197-2 Revised 11/06/12 ® © Coilcraft, Inc. 2012 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information.