COILCRAFT SER1360

Document 290 -1
Shielded Power Inductors – SER1360
The SER1360 series provides exceptionally high current carrying capability (up to 43 Amps) and very low DC resistance,
all in a low profile, small footprint package.
The part’s magnetic shielding and 13 × 13 mm base allow
high density mounting while the flat wire winding keeps
the overall height to just 6 mm.
In addition to the standard values show, custom values
are available to meet specific applications.
SRF
typ4
(MHz)
Isat (A)5
20% drop
Irms (A)6
20°C rise 40°C rise
Inductance2
Part number1
±10% (µH)
DCR (mOhm)3
typ max
SER1360-331KL_
0.33
SER1360-651KL_
0.65
SER1360-102KL_ 1.0
SER1360-182KL_ 1.8
SER1360-272KL_ 2.7
0.77
0.85 200
0.77
0.85 160
2.362.60
75
2.362.60
50
2.362.60
42
36414313.0
16.9
23272813.0
16.9
32 33 33.5 9.513.0
17 19 20
9.513.0
12 13 14
9.513.0
SER1360-402KL_
4.0
SER1360-472KL_ 4.7
SER1360-602KL_
6.0
SER1360-802KL_
8.0
SER1360-103KL_
10
5.50
6.05
5.506.05
5.50
6.05
9.83
10.81
9.83
10.81
111213 7.1
9.4
9.5 11 12
7.1 9.4
8.09.09.57.1
9.4
7.58.59.05.5
7.6
6.27.07.54.4
7.2
1. When ordering, please specify termination and packaging codes:
SER1360-103KLD
Termination:L=RoHS compliant matte-tin over nickel over phos bronze.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging:D
=13″ machine-ready reel. EIA-481 embossed plastic
tape (500 parts per full reel).
B=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/
HP 4284A or equivalent.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 4395A network analyzer and an
Agilent/HP 16193A test fixture.
5. DC current at which the inductance drops the specified amount from
its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
10% drop
34
32
28
26
24
30% drop
Designer’s Kit C365 contains 3 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant tin-silver over tin over nickel over phos
bronze (pins 1 and 2); matte tin over nickel over phos bronze (pin 3).
Other terminations available at additional cost.
Weight 2.6 – 2.8 g
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 500 per 13″ reel; Plastic tape: 24 mm wide,
0.4 mm thick, 16 mm pocket spacing, 6.6 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 290-1 Revised 09/04/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 290 -2
Shielded Power Inductors - SER1360 Series
Typical L vs Frequency Typical L vs Current
12
11
10.0 µH
10
9
8.0 µH
8
7
6.0 µH
6
4.7 µH
5
4
4.0 µH
3
1
0
8.0 µH
7
6
6.0 µH
5
4.7 µH
4
4.0 µH
1.8 µH
1.0 µH
2
1.0 µH
0.33 µH
0.01
9
8
3
1.8 µH
2
10.0 µH
10
Inductance (µH)
Inductance (µH)
12
11
1
0.1
10
Frequency (MHz)
1
0
0.33 µH
0.1
1
Current Derating
Current (A)
2
100
3
Terminal 3 is for
mounting stability only.
0.496 ±0.012
12,6 ±0,3
90
80
70
60
50
40
30
20
10
0
Isat
Irms
-40
-20
0
0.215 ±0.014
5,45 ±0,35
25°C
Percent of rated current
100
1
0.500 ±0.012
12,7 ±0,3
120
110
20
0.006 / 0,152
40
60
80
100
120 140
Ambient temperature (°C)
0.094 ±0.008
2,4 ±0,2
0.33 µH
0.110 ±0.008
2,8 ±0,2
1.0 µH
1.8 µH
70
6.0 µH
4.7 µH
4.0 µH
10.0 µH
8.0 µH
80
0.110 ±0.008
2,8 ±0,2
0.173 ±0.008
4,4 ±0,2
Temperature Rise vs Current
Temperature rise (from 25°C)
10
0.070 ±0.008
1,78 ±0,2
0.367 ±0.008
9,32 ±0,2
0.063 ±0.008
1,60 ±0,2
60
40
0.121
3,07
30
0.121
3,07
10
0
1
Recommended
Land Pattern
0.163
4,14
20
0
5
10
15
20
25
0.089
2,26
0.330
8,38
0.089
2,26
50
3
0.109
2,77
2
Dimensions are in
inches
mm
Current (A rms)
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 290-2 Revised 09/04/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.