COILCRAFT XAL7020

Document 871-1
RE
U
T
A
R
E
P
M
E
T
HIGH
Shielded Power Inductors – XAL7020
• High current and very low DCR
• Soft saturation makes them ideal for VRM/VRD applications.
Designer’s Kit C452 contains 3 of each value..
Core material Composite
Environment RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper.
Other terminations available at additional cost.
Weight 0.83 g
Ambient temperature –40°C to +125°C with Irms current, +125°C
to +165°C with derated current.
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 500/7″ reel; 2000/13″ reel Plastic tape: 16 mm wide,
0.30 mm thick, 12 mm pocket spacing, 2.2 mm pocket depth
PCB washing Only pure water or alcohol recommended
Irms (A)6
Inductance2 DCR (mOhms)3
SRF typ4 Isat5
Part number1 ±20% (µH)
typ max
(MHz)
(A) 20°C rise 40°C rise
XAL7020-151ME_ 0.15 1.9 2.5 16146.0 18 24
XAL7020-271ME_ 0.27 2.9 3.8 11230.0 15 21
XAL7020-331ME_
0.334.0
5.288
28.0
1420
XAL7020-471ME_
0.475.3
6.472
24.3
1217
XAL7020-681ME_
0.687.9
9.554
22.3
1013
XAL7020-102ME_ 1.0
9.810.8 46 16.4 8.0 11
XAL7020-122ME_
1.211.5
12.842
14.57.0
10
XAL7020-152ME_
1.516.7
18.637
11.76.09.0
XAL7020-222ME_
2.224.4
27.529
11.25.07.0
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly
dependent on many factors
including pcb land pattern, trace
size, and proximity to other components. Therefore temperature
rise should be verified in application conditions.
1. When ordering, please specify packaging code:
XAL7020-222MEC
Packaging:C=7″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel).
B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D
=13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
(2000 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at which the inductance drops 30% (typ) from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 871-1 Revised 07/25/12
© Coilcraft Inc. 2012
This product may not be used in medical of high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.
Document 871-2
URE
T
A
R
E
P
M
E
T
HIGH
Shielded Power Inductors – XAL7020
Inductance (µH)
Inductance (µH)
0.20
0.15
0.15 µH
0.10
0.05
0
0
5
10
15
20
25
30
35
Current (A)
40
45
50
55 60
Inductance (µH)
0.4
0.3
0.27 µH
0.2
0.1
0
0
10
5
15
20
25
Current (A)
30
35
40
45
Inductance (µH)
0.5
0.4
0.3
0.33 µH
0.2
0.1
0
0
5
10
15
20
Current (A)
25
30
35
0.6
Inductance (µH)
Inductance (µH)
Inductance (µH)
Inductance (µH)
Inductance (µH)
L vs Current
0.5
0.4
0.47 µH
0.3
0.2
0.1
0
0
3
6
9
12
15
18
21
24
27
30
18
21
24
27
30
Current (A)
1.4
1.2
1.0
0.8
1.0 µH
0.6
0.4
0.2
0
0
4
2
10
8
6
12
14
16
18
20
12
14
16
18
20
12
14
16
18
20
Current (A)
1.4
1.2
1.0
1.2 µH
0.8
0.6
0.4
0.2
0
0
4
2
10
8
6
Current (A)
2.0
1.6
1.2
1.5 µH
0.8
0.4
0
0
4
2
10
8
6
Current (A)
3.0
2.5
2.0
2.2 µH
1.5
1.0
0.5
0
0
1
2
3
4
5
6
7
8
9
Current (A)
10
11 12 13 14 15
1.0
0.8
0.6
0.68 µH
0.4
0.2
0
0
3
6
9
12
15
Current (A)
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 871-2 Revised 07/25/12
© Coilcraft Inc. 2012
This product may not be used in medical of high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.
Document 871-3
URE
T
A
R
E
P
M
E
T
HIGH
Shielded Power Inductors – XAL7020
L vs Frequency
0.295 ±0.020
7,5 ±0,5
XXX
Dash
number
-151
-271
-331
0.295 ±0.020
-471
7,5 ±0,5
-681
-102
-122
-152
-222
Dash
number
0.079
max*
2,0
A
±0.008 in
±0,20 mm
(in / mm)
0.249 / 6.32
0.249 / 6.32
0.245 / 6.22
0.245 / 6.22
0.241 / 6.12
0.241 / 6.12
0.241 / 6.12
0.239 / 6.08
0.238 / 6.04
B
(in / mm)
0.257 / 6.52
0.257 / 6.52
0.251 / 6.37
0.251 / 6.37
0.245 / 6.22
0.245 / 6.22
0.245 / 6.22
0.242 / 6.16
0.240 / 6.10
*Maximum height for -151 and -271
is 0.81 in / 2,05 mm .
0.07
1,78
0.063 ±0.004
1,60 ±0,10
A
(see table)
B
(see table)
Irms Derating
120
0.123 ±0.010
3,12 ±0,25
110
Dimensions are in
90
inches
mm
Recommended
Land Pattern
80
70
60
50
40
25°C
Percent of rated Irms
100
0.186
4,72
30
20
10
0
-40 -20
0
20
40
60
80
100
120
140
160 180
Ambient temperature (°C)
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 871-3 Revised 07/25/12
© Coilcraft Inc. 2012
This product may not be used in medical of high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.