SB01S/D Series 1W DC/DC CONVERTER, SMD-Package, High Isolation FEATURES Efficiency up to 81% SMD Package with Industry Standard Pinout High Isolation Voltage 3000 VDC Operating Temperature Range –40° to +85°C Low ripple and noise Lead free, RoHs Compliant Moisture sensitivity level (MSL) 3 3 Years Product Warranty The SB01S/D series are miniature, SMD Package, isolated 1W DC/DC converters with 3,000VDC isolation. It offers short circuit protection and allows a wide operating temperature range of –40°C to +85°C. These isolated DC/DC converters are the latest offering from a world leader in power systems technology and manufacturing ― Delta Electronics, Inc. With creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performance, as well as extremely high reliability under highly stressful operating conditions Model List Model Number Input Voltage (Range) Output Voltage VDC VDC 5 12 15 ±5 ±12 ±15 5 12 15 ±5 ±12 ±15 5 12 15 ±5 ±12 ±15 SB01S0505A SB01S0512A 5 SB01S0515A (4.5 ~ 5.5) SB01D0505A SB01D0512A SB01D0515A SB01S1205A SB01S1212A 12 SB01S1215A SB01D1205A (10.8 ~ 13.2) SB01D1212A SB01D1215A SB01S2405A SB01S2412A 24 SB01S2415A SB01D2405A (21.6 ~ 26.4) SB01D2412A SB01D2415A DS_SB01S/D_07232012 Output Current Input Current Load Max. capacitive Regulation Load Max. Min. @Max. Load @No Load mA 200 84 67 ±100 ±42 ±34 200 84 67 ±100 ±42 ±34 200 84 67 ±100 ±42 ±34 mA 4 1.5 1 ±2 ±0.8 ±0.7 4 1.5 1 ±2 ±0.8 ±0.7 4 1.5 1 ±2 ±0.8 ±0.7 mA(typ.) 281 258 258 277 255 258 117 106 104 112 105 104 58 53 53 57 53 53 mA(typ.) 30 12 7 Efficiency (typ.) @Max. Load % (max.) 10 7 7 10 7 7 8 5 5 8 5 5 8 5 5 8 5 5 uF 33 4.7 4.7 10* 2.2* 2.2* 33 4.7 4.7 10* 2.2* 2.2* 33 4.7 4.7 10* 2.2* 2.2* % 71 78 78 72 78 79 71 79 80 74 80 81 71 78 79 72 79 80 * For each output E-mail: [email protected] http://www.delta.com.tw/dcdc P1 Input Characteristics Parameter Input Voltage Range Input Surge Voltage (1 sec. max.) Model Min. Typ. Max. 5V Input Models 4.5 5 5.5 12V Input Models 10.8 12 13.2 24V Input Models 21.6 24 26.4 5V Input Models -0.7 --- 9 12V Input Models -0.7 --- 18 24V Input Models -0.7 --- 30 --- --- 0.3 Reverse Polarity Input Current All Models Input Filter Internal Power Dissipation Unit VDC A Internal Capacitor --- --- 550 mW Min. Typ. Max. Unit --- ±1.5 ±4.0 % Dual Output, Balanced Loads --- ±0.1 ±1.0 % Line Regulation For Vin Change of 1% --- ±1.2 ±1.5 % Load Regulation Io=20% to 100% Output Characteristics Parameter Conditions Output Voltage Accuracy Output Voltage Balance Ripple & Noise (20MHz) Ripple & Noise (20MHz) Over Line, Load & Temp. See Model Selection Guide --- 75 100 mV P-P --- --- 150 mV P-P Ripple & Noise (20MHz) --- --- 15 mV rms Temperature Coefficient --- ±0.01 ±0.02 %/℃ Short Circuit Protection 0.5 Second Max. General Characteristics Parameter Conditions Min. Typ. Max. Unit 60 Seconds 3000 --- --- VDC I/O Isolation Resistance 500 VDC 10 --- --- GΩ I/O Isolation Capacitance 100KHz, 1V --- 60 100 pF 50 100 150 KHz 2,000,000 --- --- Hours I/O Isolation Voltage (rated) Switching Frequency MTBF (calculated) MIL-HDBK-217F@25℃, Ground Benign Moisture Sensitivity Level (MSL) IPC/JEDEC J-STD-020D Level 3 Recommended Input Fuse 5V Input Models 500mA Slow-Blow Type 12V Input Models 200mA Slow-Blow Type 24V Input Models 100mA Slow-Blow Type Environmental Specifications Parameter Operating Temperature Range (with Derating) Case Temperature Storage Temperature Range Humidity (non condensing) Cooling Lead Temperature (1.5mm from case for 10Sec.) DS_SB01S/D_07232012 Conditions Ambient Min. Max. -40 +85 --+90 -50 +125 --95 Free-Air convection --300 Unit ℃ ℃ ℃ % rel. H ℃ E-mail: [email protected] http://www.delta.com.tw/dcdc P2 Output Power (%) Power Derating Curve Notes 1 2 3 4 5 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. Ripple & Noise measurement bandwidth is 0-20MHz. These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. All DC/DC converters should be externally fused at the front end for protection. Specifications subject to change without notice. Mechancial Drawing 8 7 1 5 6 3 12.7 [0.50] 2.54 [0.10] 1.7 [0.07] 5.08 [0.2] 5.08 [0.2] 2.54 [0.1] 0~ 4 1.3 [0.05] R 0. 5 2 11.2 [0.44] 12 11 10 0.25 [0.01] Connecting Pin Patterns 8.0 [0.31] Mechanical Dimensions 10.8 [0.43] ( Magnification of A ) 15.3 [0.6] 6.75 [0.27] 7.0 0.5 [0.28 0.02] 1.0 [0.04] S SEATING PLANE A 7.0 [0.28] 0.25 [0.01] 0.60 [0.02] 5.08 [0.20] 9.2 [0.36] 0.15 S ►All dimensions in mm (inches) ►Tolerance: X.X±0.25 (X.XX±0.01) X.XX±0.13 ( X.XXX±0.005) ►Pins ±0.05 (±0.002) Pin Connections Pin Single Output 1 -Vin 2 +Vin 3 NA 5 -Vout 6 NA 7 NA 8 +Vout 10 NA 11 NA 12 NA Dual Output -Vin +Vin NA Common -Vout NA +Vout NA NA NA Physical outline Case Size Case Material : : 15.3x8.0x6.75mm (0.60x0.31x0.27 Inches) Molding (flammability to UL 94V-0 rated) Weight : 2.2g NA : Not Available for Electrical Connection DS_SB01S/D_07232012 E-mail: [email protected] http://www.delta.com.tw/dcdc P3 Part Numbering System S B 01 S 05 05 A Form factor Family series Watt Number of Outputs Input Voltage Output Voltage Option Code D-DIP P-SIP S-SMD A~Z 01:1W 02:2W 03:3W 04:4W 06:6W 03:3.3V 05: 5V 12:12V 24: 24V 48:48V 03:3.3V 05: 5V 12:12V 15: 15V 24: 24V A - Std. Functions S - Single D- Dual WARRANTY Delta offers a three(3) years limited warranty. Complete warranty information is listed on our web site or is available upon request from Delta. Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice. DS_SB01S/D_07232012 E-mail: [email protected] http://www.delta.com.tw/dcdc P4