EPCOS B82442A1684000

SMT inductors
SIMID series, SIMID 2220-A
Series/Type:
B82442A
Date:
March 2008
%BUB4IFFU
© EPCOS AG 2008 . Reproduction, publication and dissemination of this p ublication, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SMT inductors, SIMID series
B82442A
SIMID 2220-A
Size 2220 (EIA) or 5650 (IEC)
Rated inductance 1 NH to 10000 NH
Rated current 25 mA to 1800 mA
Construction
■ Upright ferrite drum core
■ Laser-welded winding
■ Flame-retardant molding
Features
Temperature range up to 150 °C
Current handling capability up to 1.8 A
High inductance ratings
Qualified to AEC-Q200
Suitable for lead-free reflow soldering
as referenced in JEDEC J-STD 020C
■ RoHS-compatible
■
■
■
■
■
Applications
Filtering of supply voltages, coupling, decoupling
DC/DC converters
Automotive electronics
Telecommunications
(e.g. blocking filter for 12- and 16-kHz counting pulses)
■ Consumer electronics
■ Industrial electronics
■
■
■
■
Terminals
■ Base material CuSn6
■ Layer composition Cu, Ag, Sn (lead-free)1)
■ Electro-plated
Marking
■ Marking on component:
Manufacturer, L value (in nH),
tolerance of L value (coded), date of manufacture (YWWD)
■ Minimum data on reel:
Manufacturer, ordering code, L value, quantity, date of packing
Delivery mode and packing unit
■ 12-mm blister tape, wound on 330-mm ∅ reel
■ Packing unit: 1500 pcs./reel
1) Ni-barrier-plated terminals on request (B82442A*50).
Please read Cautions and warnings and
Important notes at the end of this document.
2
03/08
SMT inductors, SIMID series
B82442A
SIMID 2220-A
Dimensional drawing and layout recommendation
3.5±0.11)
A
0.7±0.2 1)
B
C
D
B
0.7 min.1)
5+0.3
0.15 max.
IND0053-6
5.6+0.3
A
B
C
D
4.5
2.0
4.0
8.0
5+0.3
Marking
1) Soldering area
Dimensions in mm
IND0088-3-E
Taping and packing
Reel
12±0.3
2±0.05
_0
12.4 +1.5
<_ 6.0
1.6±0.1
8±0.1
62±1.5
IND0350-S
Direction of unreeling
IND0564-H-E
Dimensions in mm
Please read Cautions and warnings and
Important notes at the end of this document.
13±0.2
_2
330 +0
1.5+0.1
<_ 7.2
Component
18.4 max.
5.5±0.1
4±0.1
1.75±0.1
Blister tape
3
03/08
SMT inductors, SIMID series
B82442A
SIMID 2220-A
Technical data and measuring conditions
Rated inductance LR
Measured with impedance analyzer Agilent 4294A
at frequency fL, 0.1 V, 20 °C
Q factor Qmin
Measured with impedance analyzer Agilent 4294A
at frequency fQ, 20 °C
Rated temperature TR
105 °C
Rated current IR
Maximum permissible DC with inductance decrease
ΔL/L0 ≤ 10% and temperature increase
of ≤ 20 K at rated temperature
Self-resonance frequency fres,min
Measured with network analyzer Agilent 8753D, 20 °C
DC resistance Rmax
Measured at 20 °C
Solderability (lead-free)
Sn95.5Ag3.8Cu0.7: (245 ±5) °C, (5 ±0.3) s
Wetting of soldering area ≥ 90%
(based on IEC 60068-2-58)
Resistance to soldering heat
260 °C, 40 s (as referenced in JEDEC J-STD 020C)
Climatic category
55/150/56 (to IEC 60068-1)
Storage conditions
Mounted: –55 °C … +150 °C
Packaged: –25 °C … +40 °C, ≤ 75% RH
Weight
Approx. 0.4 g
Please read Cautions and warnings and
Important notes at the end of this document.
4
03/08
SMT inductors, SIMID series
B82442A
SIMID 2220-A
Characteristics and ordering codes
LR
Ordering code1)2)
f L; f Q
IR
Rmax
fres,min
MHz
mA
Ω
MHz
10
7.96
1800
0.024
95
B82442A1102K000
1.2
10
7.96
1700
0.028
70
B82442A1122K000
1.5
10
7.96
1600
0.032
55
B82442A1152K000
1.8
10
7.96
1400
0.040
47
B82442A1182K000
2.2
10
7.96
1300
0.048
42
B82442A1222K000
2.7
10
7.96
1200
0.056
37
B82442A1272K000
3.3
10
7.96
1120
0.064
34
B82442A1332K000
3.9
10
7.96
1050
0.072
32
B82442A1392K000
4.7
10
7.96
950
0.088
29
B82442A1472K000
5.6
10
7.96
880
0.104
26
B82442A1562K000
6.8
10
7.96
810
0.120
24
B82442A1682K000
8.2
10
7.96
750
0.144
22
B82442A1822K000
10
10
2.52
690
0.168
19
B82442A1103K000
12
10
2.52
630
0.20
17
B82442A1123K000
15
10
2.52
580
0.24
16
B82442A1153K000
18
10
2.52
530
0.29
14
B82442A1183K000
22
10
2.52
480
0.35
13
B82442A1223K000
27
10
2.52
440
0.42
11.5
B82442A1273K000
10
2.52
400
0.50
10.5
B82442A1333+000
10
2.52
370
0.58
9.5
B82442A1393+000
47
10
2.52
340
0.68
8.5
B82442A1473+000
56
10
2.52
310
0.80
7.8
B82442A1563+000
68
10
2.52
290
0.96
7.0
B82442A1683+000
82
10
2.52
270
1.12
6.4
B82442A1823+000
100
20
0.796
250
1.28
6.0
B82442A1104+000
120
20
0.796
230
1.52
5.4
B82442A1124+000
150
20
0.796
210
1.76
4.8
B82442A1154+000
180
20
0.796
190
2.24
4.4
B82442A1184+000
Tolerance
Qmin
μH
1.0
±10%
33
±5%
39
±10%
^
^
K
J
^
K
Closer tolerances on request.
Higher currents possible at temperatures <TR on request.
Sample kit available. Ordering code: B82442X001
For more information refer to chapter “Sample kits”.
1) Replace the + by the code letter for the required inductance tolerance.
2) For Ni-barrier-plated terminals replace the last two digits “00” by “50”.
Please read Cautions and warnings and
Important notes at the end of this document.
5
03/08
SMT inductors, SIMID series
B82442A
SIMID 2220-A
Characteristics and ordering codes
LR
Ordering code1)2)
f L; f Q
IR
Rmax
fres,min
MHz
mA
Ω
MHz
20
0.796
170
2.72
3.9
B82442A1224+000
20
0.796
155
3.36
3.6
B82442A1274+000
330
20
0.796
140
3.92
3.2
B82442A1334+000
390
20
0.796
130
4.64
2.9
B82442A1394+000
470
20
0.796
120
5.60
2.6
B82442A1474+000
560
20
0.796
110
6.80
2.4
B82442A1564+000
680
20
0.796
100
8.00
2.2
B82442A1684+000
820
20
0.796
90
10.4
2.0
B82442A1824+000
1000
30
0.252
85
12.0
1.8
B82442A1105+000
1200
30
0.252
75
13.6
1.5
B82442A1125+000
1500
30
0.252
70
16.0
1.4
B82442A1155+000
1800
30
0.252
60
24.0
1.3
B82442A1185+000
2200
30
0.252
55
28.0
1.2
B82442A1225+000
2700
30
0.252
45
44.0
1.1
B82442A1275+000
3300
30
0.252
40
48.0
1.0
B82442A1335+000
3900
30
0.252
38
56.0
1.0
B82442A1395+000
4700
30
0.252
36
62.4
0.9
B82442A1475+000
5600
30
0.252
33
68.0
0.8
B82442A1565+000
6800
30
0.252
30
88.0
0.7
B82442A1685+000
8200
30
0.252
28
100
0.6
B82442A1825+000
10000
30
0.0796
25
120
0.5
B82442A1106+000
Tolerance
Qmin
μH
220
±5%
270
±10%
^
J
^
K
For telecommunications in blocking filter for 12- and 16-kHz counting pulses
980
±3%
8
0.016
85
15
1.8
B82442A1984A000
1450
8
0.016
70
20
1.4
B82442A1145A500
2600
6
0.012
45
43
1.1
B82442A1265A000
3050
8
0.016
45
45
0.9
B82442A1305A500
5330
6
0.012
34
66
0.8
B82442A1535A300
^
A
Closer tolerances on request.
Higher currents possible at temperatures <TR on request.
Sample kit available. Ordering code: B82442X001
For more information refer to chapter “Sample kits”.
1) Replace the + by the code letter for the required inductance tolerance.
2) For Ni-barrier-plated terminals replace the last two digits “00” by “50”.
Please read Cautions and warnings and
Important notes at the end of this document.
6
03/08
SMT inductors, SIMID series
B82442A
SIMID 2220-A
Inductance L versus DC load current IDC
measured with LCR meter Agilent 4275A,
typical values at 20 °C
Impedance |Z| versus frequency f
measured with impedance analyzer
Agilent 4191A/4194A, typical values at 20 °C
IND0089-B
10 6
Ω
B82442A
| Z | 10 5
L 10 4
10 4
10 3
10 3
10 2
10 2
10 1
1 µH
10 µH
100 µH
1000 µH
10000 µH
10 1
10 0 5
10
10
6
10
7
10
B82442A
10000 µH
1000 µH
100 µH
10 µH
1 µH
10 0
8
Hz 10
f
10
9
_1
10
_2
10
_1
10 0
A 10 1
I DC
Q factor versus frequency f
measured with impedance analyzer
Agilent 4191A/4194A, typical values at 20 °C
80
IND0090-9
10 5
µH
Current derating Iop/IR
versus ambient temperature TA
(rated temperature TR = 105 °C)
IND0091-4
IND0092-V-E
1.2
B82442A
Iop
IR
Q
B82442A
1.0
60
0.8
40
0.6
0.4
20
0
10 4
1 µH
10 µH
100 µH
1000 µH
10000 µH
10 5
0.2
10 6
10 7
0
Hz 10 8
f
7
0
03/08
20
40
60
80 100 120
C 160
TA
Cautions and warnings
■ Please note the r ecommendations in our Induc tors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the c omponents are to be washe d varnished it is necessary to check whether th e w ashing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In partic ular, it is poss ible for w ashing varni sh agent resid ues to have a
negative effect in the long-term on wire insulation.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is nec essary to check whether the po tting material us ed atta cks or de stroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct im pact. Thi s can ca use the core material to flake, or lea d to
breakage of the core.
■ Even for customer-specific products, conclusive validation of t he component in the c ircuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
8
03/08
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the s uitability of our products for
certain areas of application. These statem ents are based on our knowledge of typical
requirements that are often place d on our products in the areas of a pplication concerned. We
nevertheless e xpressly po int out that such statements cannot be regarded
as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with
them than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In cus tomer applications requiring a very
high level of operational safety and especially in customer applications in which the malfunction
or failu re of an el ectronic co mponent could endange r human l ife or he alth (e.g. in ac cident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of
the cu stomer application or othe r acti on tak en by the cu stomer (e.g. in stallation of protec tive
circuitry or redundancy) that no injury or da mage is s ustained by third parties in the e vent of
malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to s atisfy c ertain technical requirements, some of the products de scribed in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they a re classed as haz ardous). Useful in formation on thi s wil l be fo und i n o ur
Material D ata Sheets on the Internet (w ww.epcos.com/material). Should yo u have any mo re
detailed questions, please contact our sales offices.
5. We constantly strive to imp rove our prod ucts. Consequently, the products desc ribed in this
publication may cha nge fr om time to time . The s ame is true of th e corresponding product
specifications. P lease c heck therefore to what extent produ ct des criptions and spec ifications
contained in this publication are still applicable before or when you place an order.
We a lso reserve the r ight t o discontinue production and delivery of
products.
Consequently, we can not guarantee that al l products named in thi s publication will always be
available.
The aforeme ntioned does n ot apply in the c ase o f indiv idual agreem ents dev iating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “Ge neral Terms of Delivery for Products and Services in the E lectrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue,
MKK, MLSC, MotorC ap, PCC, PhaseCap, PhaseCube, PhaseMod, SIFERRIT, SIFI, S IKOREL,
SilverCap, SIMDAD, SIM ID, SineFormer, SIOV, SIP5D , SIP 5K, Therm oFuse, WindCap are
trademarks registered or pending in Europe and in other countries. Further information will be
found on the Internet at www.epcos.com/trademarks.
9
03/09