Sample Kit 2008 High-Power Inductors www.epcos.com B82559X001 H P I1 3 S e r i e s B 8 2 5 5 9 A * A 0 1 3 High-Power Inductors HPI13 L (inductance) ±10% Isat, typ DCRmax ±15% Height hmax Ordering code L (inductance) ±10% Isat, typ DCRmax ±15% Height hmax Ordering code μH A mV mm B82559 μH A mV mm B82559 0.5 30 0.78 4.95 A0501A013 2.15 15 3.2 4.95 A0222A013 0.95 25 1.12 5.95 A0951A013 2.4 16.5 2.76 5.95 A0242A013 1.4 22 1.5 5.95 A0142A013 3.9 12 4.8 5.95 A0392A013 at 25 °C ambient temperature 11 max. will result in 20% reduction of nominal inductance n Temperature response needs to be verified in specific applications; test results on request 10.4 n Operating temperature: –40 to +130 °C h FIN0255-D FIN0254-V n Flat wire winding: extremely low-resistance coil Mechanical dimensions and suggested pad layout n Self-leaded construction features under body (reference only) termination for smallest possible footprint n Special values and sizes on request n Blister tape packaging: Height of component Reel Further product information: www.epcos.com h = 4.65 mm 750 pcs. The Important Notes and the product-specific Warnings and h = 5.65 mm 550 pcs. Cautions must be observed (www.epcos.com/importantnotes). 12.8 4.4 Marking 10.4 ref. 13.2 max. 2.3 ref. n All values measured n Isat, typ is current that 1.1 20 1.72 4.95 A0112A013 3.0 13 4.0 4.95 A0302A013 Product Marketing and Design Transformers and Chokes: [email protected] 0.5 μH 0.95 μH 1.1 μH 1.4 μH 2.15 μH 2.4 μH 3.0 μH 3.9 μH