AMPMODU Interconnection System Wire-to-Board, .100 [2.54] Centerline Products Wire Sizes Contact Platings Wire-to-Board Products Mating Post Lengths Wire Size AWG [mm2] 20 0.5-0.6 22-30 0.3-0.05 32 0.03 Platings .000015 [0.00038] Gold .000030 [0.00076] Gold .000050 [0.00127] Gold Tin Post Lengths .210-.283 [5.33-7.19] .205-.283 [5.21-7.19] .185-.283 [4.70-7.19] .256-.323 [6.50-8.20] .251-.323 [6.38-8.20] .231-.323 [5.87-8.20] .222-.273 [5.64-6.93] .200-.273 [5.08-6.93] .200-.250 [5.08-6.35] .169-.259 [4.29-6.58] .273-.350 [6.93-8.89] .200-.277 [5.08-7.04] Product Family Locking Clip, Mod. IV, IV.v, V, MT, Short Point Locking Clip, Mod. IV, IV.v, V, MTE, MT, Short Point Mod. IV, IV.v, V, Short Point Product Family Mod. IV, IV.v, V, MTE, MT, Short Point Locking Clip, Mod. IV, IV.v, V, MTE, MT, Short Point Locking Clip, Mod. IV, IV.v, V, MT Locking Clip, Mod. IV, IV.v, V, MTE, MT, Short Point Product Family Mod. IV (.600 [15.24] Profile Height) Mod. IV.v (.600 [15.24] Profile Height) Mod. V (.600 [15.24] Profile Height) Mod. IV (.645 [16.38] Profile Height) Mod. IV.v (.645 [16.38] Profile Height) Mod. V (.645 [16.38] Profile Height) MT Assembly with Standard Pressure Contacts MT Assembly with High Pressure Contacts MTE Assembly Short Point Connector Assembly Locking Clip (Connector Assembly) Locking Clip (Single Contact) 5 Application Tooling Application Tooling Description Manual Hand Tools (Wire Crimp) Manual Hand Tools (IDC) AMP-O-MATIC Stripper/Crimper Machines with Applicator CHAMPOMATOR Model 2.5 Machine CHAMPOMATOR Model 3A Machine AMP-O-LECTRIC Machines with Applicator Pneumatic Hand Tools IDC Electric Power Unit Tube-Fed Ribbon Cable Machine AMPOMATOR CLS Machines Discrete Wire Machine Manual Arbor Tool Pneumatic Arbor Tool Mod. IV, IV.v, V MT • Product Family Locking Short MTE Clip Point • • • • • • Level V • • • • • • • • • • • • • • • • • • • • • • • • • • 88 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Board-to-Board Solutions Guide, .100 [2.54] Centerline Products Problem or Concern Tyco Electronics' Potential Solution Headers Float Off Board Soldering Operation HEADERS Retention Feature: Unshrouded Shrouded Header Contacts Damaged During Manufacturing Operation or In-Field Use Shrouded HEADERS: Standard Profile Board/Backplane Requires High Temperature SurfaceMount Compatibility Application Requires Board Guidance, Polarization and/or Blind-Mate Capability Reduction in Parallel Board-to-Board Stack Height Necessary (Refer to Parallel Stack Guide on Page 62.) Application Requires Connectors to be End-to-End Stackable on .100 [2.54] Grid Single-Row Right-Angle Headers, Horizontal Receptacles (Page Ref.) Double-Row Vertical Headers and Receptacles (Page Ref.) Double-Row Right-Angle Headers, Horizontal Receptacles (Page Ref.) 102 — 103 — 198 104, 199 199 105, 200 115 116 117-121 122-128 — — 147 148, 149, 199 — — 103* — 104* 130*, 137* 105* 138* — 196* 195* — 172 110 189-192 — 173 — — 198, 199 196* 200 195* — — 179, 180* — — — — — — — — — — — 182-184 189-192 — — — 182 — 94, 95, 103* 103* — 96, 97, 104* 104* 110* 98. 99. 105 108* — 169* 172 176, 179, 180*, 182*, 183, 184 191, 192 170 173 Press-Fit ACTION PIN POST HEADERS: Unshrouded 146 Shrouded — Machine Applied 163, 164 Posts Surface-Mount Compatible Thru-Hole: HEADERS: Unshrouded 102* Shrouded — (Low Profile) RECEPTACLES — Surface-Mount: HEADERS 109* RECEPTACLES 187, 188 Two-Piece Family: w/Guide Posts: HEADERS — RECEPTACLES — Mod IV Low Profile RECEPTACLES: TOP ENTRY: Thru-Hole 178 Surface-Mount — BOTTOM ENTRY: Thru-Hole 177 Surface-Mount — DUAL ENTRY Thru-Hole 181 Surface Mount 187, 188 RECEPTACLES: Bottom Entry Outrigger 181 (Separate Holes for Receptacle Leads and Mating Leads) End-to-End Stackable: HEADERS (Unshrouded): Thru-Hole 93, 102 Thru-Hole* 102* Surface-Mount 109* RECEPTACLES: Thru-Hole 175, 177, 178, 181 Surface Mount 188 .100 [2.54] Centerline Products Soldering Problems with Thru-Hole Bottom Entry Receptacles (Must Mask Post Holes in Board During Soldering Operation) Single-Row Vertical Headers and Receptacles (Page Ref.) *High temperature compatible version, refer to page ref. listed. 5 Wire-to-Board Solutions Guide, .100 [2.54] Centerline Products Customer Requirement Application Requires Guidance, Polarization Wire-to-Wire Application Wire-to-Wire Application (Latched) Wire-to-Wire Application (Through Panel) High Vibration and Shock Applications Printed Circuit Board Polarization Board Requires Surface Mount Capability Tyco Electronics' Potential Solution Mod IV Polarized Housing MTE Latched Receptacle and Header MT with Polarizing Covers Short Point Polarized Housing Mod IV Receptacle Contacts and Pins MTE Latched Receptacle and Shrouded Pin Assembly MTE Panel Mount Locking Clip Contacts and Housings MTE Header with PC Board Orientation Peg MTE Surface Mount Headers MTE High Temperature Compatible Headers Catalog Page(s) 220 230, 231, 244-250 256-258 224 211-213 230, 231, 236, 237 242 207-209 248, 249 251, 252 249, 250 Need to mate to AMP-LATCH Eject Headers Mod IV Ejection Housing 220 Need to Minimize Strain to Cable MT with Eject Covers Mod IV Housing with Strain Relief 256-259 218, 219 Locking Clip Contacts 207, 298 Application Requires Self-Retaining Contacts Header Secured to Board During/Prior to Soldering MTE Headers with Post Retention or Holddowns 244-250 Mate to Unshrouded Header with Retention Requirements Mod IV plain Housing with Mod V Contacts MTE with High Pressure Contacts 213, 214, 216 234, 235 Multiple Cables to be Common to One Header Right-Angle Cable Dress Application Requires Crimp Contacts and MTE Housings Housings and End-to-End and Side-to-Side Stackable Connector Must Mate to Post Lengths of .169 [4.29] Min. MTE Coupling Shroud, Double- or Single-Row 240, 241 MT with Hermaphroditic Covers 229, 256, 257, 259 Short Point Contacts 222 Short Point Double-Row Housing, MTE Plain Housing 223, 228, 229 Short Point Contacts 222 89 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System MTE Interconnection System Product Facts Receptacle assemblies mate with .025 [0.64] sq. posts; mating post length is .200 [5.08] min., .250 [6.35] max. ■ Proven AMPMODU receptacle contact design; dual cantilever beams, built-in anti-overstress, completely enclosed “box” design, standard or high-pressure ■ Insulation displacement technology ■ Two contact sizes for terminating 30-22 AWG [0.050.3 mm2] wire range; .054 [1.37] max. insulation diameter with an insulation wall thickness of .015 [0.38] max. ■ Choice of gold duplex or tin plated contacts ■ Interchangeable crimp snap-in pin and receptacle contacts available ■ Housing sizes 2 through 25 positions, single-row .100 [2.54] centers ■ Plain housings are end-to-end and/or back-to-back stackable for open pin field applications ■ Optional header with “swaged tail” feature helps prevent movement prior to flow soldering ■ Integral latch provides positive retention between header and receptacle housing ■ Coupling shrouds permit ganging of smaller connectors with guide ribs to form larger single- or double-row latching connectors ■ Mass terminating tooling provides lowest applied cost for most production needs ■ SMT and SMT compatible, high-temp headers available ■ Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 R ■ Certified by Canadian Standards Association, File No. LR7189 R MTE Interconnection System ■ The AMPMODU MTE Interconnection System offers both wire-to-board and wire-to-wire connectors using .025 [0.64] sq. post technology. The AMPMODU MTE Interconnection System consists of single-row housings with contacts preloaded on .100 [2.54] centers. Housings are furnished with contacts partially inserted, leaving the termination areas exposed. Final contact insertion can be accomplished automatically with Tyco Electronics application equipment, and manually when terminated with the Tyco Electronics pistol grip hand tool. The heart of the system is the insulation displacement contact design, featured in both pin and receptacle contacts. The receptacle contact, available in either standard or high-pressure, features dual cantilever beams in an enclosed “box.” The post stop helps prevent a mating post from disturbing the wire termination and also limits the mating depth of a long post to protect a wrap-type termination at the base of the post. The forward contact stop helps prevent contact overinsertion prior to termination. All contacts are furnished on carrier strips which are interlocked for stability and positive location during termination. Single-row housings are available in sizes 2 through 25 positions. Included are three styles of receptacle housings—plain, polarized/ latching and ribbed and two styles of pin housings, shrouded with polarizing/ latching feature and ribbed. 5 Performance Specifications Electrical Characteristics Contact Current Rating — 3 amperes for single contact in free air (Amperage could vary due to ambient temperature, wire size and duty cycles.) Contact Termination Resistance — 15 milliohms (max.) Dielectric Withstanding Voltage — At Sea Level–600 VAC, rms At 70,000 Ft. [21 336 m]–225 VAC, rms Insulation Resistance — 5,000 megohms (min.) Environmental Characteristics Operating Temperature — -65°C to +105°C Vibration — 15 G’s (gold), 10 G’s (tin) Physical Shock — 50 G’s Industrial Mixed Flow Gasing — Class 1 (20 days) (gold) Product Specification 108-25034 Application Specification 114-25026 225 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System MTE Interconnection System (Continued) Wire-to-Board Receptacle Assemblies with Guide Ribs (See pages 232 & 233) High-Temp Headers, Polarized/Latching, Straight and Right Angle Post, with or without Holddown 2 (See pages 249 & 250) Receptacle Assemblies Polarized/Latching (See pages 230 & 231) Double-Row Coupling Shroud (See page 241) Receptacle Assemblies, Polarized/Latching (See pages 230 & 231) AMPMODU Shrouded Headers, Double-Row, Straight or Right Angle Post1 (See pages 119-121, 124, 125, 127, 128, 131-133 & 149) Headers, Polarized/Latching, Straight Post, with or without Swaged Tail 2 (See pages 244 & 245) MTE Interconnection System Headers, Polarized/Latching, Right Angle Post, with or without Holddown (See pages 246 & 247) Receptacle Assemblies Plain (See pages 228 and 229) High Pressure Receptacle Assemblies, Plain (See page 234) Receptacle Assemblies with Guide Ribs (See pages 232 & 233) Receptacle Contact, Insulation Displacement (Used in all Receptacle Assemblies) 5 Single-Row Coupling Shroud (See page 240) AMPMODU Breakaway Headers, Single- or Double-Row, Straight or Right–Angle Post, with or without Board Retention Feature (See pages 102-105) Mating AMPMODU Double-Row Shrouded Header Assemblies must have .318 [8.08] mating post length and .150 [3.81] dimension from centerline of last post to inside of end shroud wall. Surface Mount Right-Angle and Vertical Headers are also available (see pages 251 and 252) 1 1 2 226 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System MTE Interconnection System (Continued) Wire-to-Wire Pin Assemblies, Shrouded Polarized/Latching (See pages 236 & 237) Receptacle Assemblies, Polarized/Latching (See pages 230 & 231) Receptacle Contact, Insulation Displacement (Used in all Receptacle Assemblies) Pin Contact, Insulation Displacement (Used in all Pin Assemblies) Pin Assemblies with Guide Ribs (See pages 238 & 239) Panel Mount Pin Shroud (See page 242) MTE Interconnection System Receptacle Assemblies Single-Row with Guide Ribs Coupling (See pages 232 & 233) Shroud (See page 240) Crimp Snap-In Receptacle Contact (Used with Unloaded Housings— See page 253) Crimp Snap-In Pin Contact (Used with Unloaded Housings— See page 254) Note: For wire-to-wire applications shown above, all pin and receptacle assembly combinations are intermateable. 5 227 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System MTE Receptacle Assemblies—Plain, Single-Row, .100 [2.54] Centerline Receptacle Contacts (See Note 1) .520 [13.21] 1.120 [28.45] Preassembled housings in strip form are available in positions 2 thru 12. For ease of handling, positions 2 thru 5 are recommended when using the Tyco Electronics Manual Pistol Grip Tool. Material and Finish MTE Receptacle Assemblies Housing — Black thermoplastic, 94V-0 rated Contacts — Phosphor Bronze, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel Plating B — Duplex plated .000015 [0.00038] gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel Plating C — .000100 [0.00254] tin over .000050 [0.00127] nickel on entire contact Note: Insulation displacement contacts accept an insulation diameter of .030 [0.76] min. to .054 [1.37] max. with an insulation wall thickness of .015 [0.38] max. Mating post length for preloaded housings is .200 [5.08] min., .250 [6.35] max. 5 .600 [15.24] B Typ. A Position No. 1 Indicator (Farside) .100 [2.54] Typ. .098 [2.49] Related Product Data Mateable AMPMODU Products Breakaway Headers — pages 102110 (with .230 mating length) Reeled Breakaway Headers — pages 106, 107 (with .230 mating length) Machine Applied Bandolier Posts — page 163 Single-Row Shrouded Headers with .066 [1.68] End Dimension — pages 115, 116 Interchangeable Crimp Contacts (Short Point) — page 253 Application Tooling — page 273 Performance Specifications — page 225 Technical Documents — pages 277, 278 Product Specification 108-25034 Application Specification 114-25026 These receptacle assemblies with plain housings can be stacked end-to-end and/or sideto-side for single or double-row connections to an open pin field with a .100 [2.54] centerline grid. 228 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System MTE Receptacle Assemblies—Strip Form Plain, Single-Row, .100 [2.54] Centerline (Continued) Dimensions No. of Pos. 2 3 4 5 6 7 8 9 10 11 12 A B 2.000 [50.80] .198 [5.03] 2.400 [60.96] .298 [7.57] 1.990 [50.55] .398 [10.11] 1.990 [50.55] .498 [12.65] 2.390 [60.71] .598 [15.19] 1.400 [35.56] .698 [17.73] 1.600 [40.64] .798 [20.27] 1.800 [45.72] .898 [22.81] 2.000 [50.80] .998 [23.35] 2.200 [55.88] 1.098 [27.89] 2.400 [60.96] 1.198 [30.43] Housing Quantities Per Strip Segment 10 8 5 4 4 2 2 2 2 2 2 Strip Form Receptacle Assembly 30-26 AWG [0.05-0.15mm2] Wire Plating A Plating B Plating C 5-103979-1 5-103979-2 5-103979-3 5-103979-4 5-103979-5 5-103979-6 5-103979-7 5-103979-8 5-103979-9 6-103979-0 6-103979-1 5-103978-1 5-103978-2 5-103978-3 5-103978-4 5-103978-5 5-103978-6 5-103978-7 5-103978-8 5-103978-9 6-103978-0 6-103978-1 5-103977-1 5-103977-2 5-103977-3 5-103977-4 5-103977-5 5-103977-6 5-103977-7 5-103977-8 5-103977-9 6-103977-0 6-103977-1 Strip Form Receptacle Assembly 26-22 AWG [0.12-0.3mm2] Wire Plating A Plating B Plating C 5-103976-1 5-103976-2 5-103976-3 5-103976-4 5-103976-5 5-103976-6 5-103976-7 5-103976-8 5-103976-9 6-103976-0 6-103976-1 5-103975-1 5-103975-2 5-103975-3 5-103975-4 5-103975-5 5-103975-6 5-103975-7 5-103975-8 5-103975-9 6-103975-0 6-103975-1 5-103974-1 5-103974-2 5-103974-3 5-103974-4 5-103974-5 5-103974-6 5-103974-7 5-103974-8 5-103974-9 6-103974-0 6-103974-1 Unloaded Housings 103688-1 103688-2 103688-3 103688-4 103688-5 103688-6 103688-7 103688-8 103688-9 1-103688-0 1-103688-1 MTE Receptacle Assemblies MTE Receptacle Assemblies—Individual Form Plain, Single-Row, .100 [2.54] Centerline No. of Pos. Dimensions B 13 14 15 16 17 18 19 20 21 22 23 24 25 1.298 [32.96] 1.398 [35.51] 1.498 [38.05] 1.598 [40.59] 1.698 [43.13] 1.798 [45.67] 1.898 [48.20] 1.998 [50.75] 2.098 [53.29] 2.198 [55.83] 2.298 [58.37] 2.398 [60.91] 2.498 [63.45] Individual Receptacle Assembly 30-26 AWG [0.05-0.15mm2] Wire Individual Receptacle Assembly 26-22 AWG [0.12-0.3mm2] Wire Plating A Plating B Plating C Plating A Plating B Plating C 6-103903-2 6-103903-3 6-103903-4 6-103903-5 6-103903-6 6-103903-7 6-103903-8 6-103903-9 7-103903-0 7-103903-1 7-103903-2 7-103903-3 7-103903-4 6-103684-2 6-103684-3 6-103684-4 6-103684-5 6-103684-6 6-103684-7 6-103684-8 6-103684-9 7-103684-0 7-103684-1 7-103684-2 7-103684-3 7-103684-4 6-103685-2 6-103685-3 6-103685-4 6-103685-5 6-103685-6 6-103685-7 6-103685-8 6-103685-9 7-103685-0 7-103685-1 7-103685-2 7-103685-3 7-103685-4 6-103902-2 6-103902-3 6-103902-4 6-103902-5 6-103902-6 6-103902-7 6-103902-8 6-103902-9 7-103902-0 7-103902-1 7-103902-2 7-103902-3 7-103902-4 6-103686-2 6-103686-3 6-103686-4 6-103686-5 6-103686-6 6-103686-7 6-103686-8 6-103686-9 7-103686-0 7-103686-1 7-103686-2 7-103686-3 7-103686-4 6-103687-2 6-103687-3 6-103687-4 6-103687-5 6-103687-6 6-103687-7 6-103687-8 6-103687-9 7-103687-0 7-103687-1 7-103687-2 7-103687-3 7-103687-4 Unloaded Housings 1-103688-2 1-103688-3 1-103688-4 1-103688-5 1-103688-6 1-103688-7 1-103688-8 1-103688-9 2-103688-0 2-103688-1 2-103688-2 2-103688-3 2-103688-4 5 Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted into housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with Tyco Electronics pistol grip hand tool. 2. Use Extraction/Lance Reset Tool No. 843477-1 to remove receptacle contacts. 3. Keying plugs are available, see page 253. Note: All part numbers are RoHS compliant. 229 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System MTE Receptacle Assemblies—Polarized/Latching, Single-Row, .100 [2.54] Centerline Receptacle Contacts (See Note 1) .520 [13.21] Preassembled housings in strip form are available in positions 2 thru 12. For ease of handling, positions 2 thru 5 are recommended when using the Tyco Electronics Manual Pistol Grip Tool. 1.120 [28.45] .600 [15.24] Material and Finish MTE Receptacle Assemblies Housing — Black thermoplastic, 94V-0 rated Contacts — Phosphor Bronze, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel Plating B — Duplex plated .000015 [0.00038] gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel Plating C — .000100 [0.00254] tin over .000050 [0.00127] nickel on entire contact Note: Insulation displacement contacts accept an insulation diameter of .030 [0.76] min. to .054 [1.37] max. with an insulation wall thickness of .015 [0.38] max. Mating post length for preloaded housings is .200 [5.08] min., .250 [6.35] max. 5 B Typ. A Position No. 1 Indicator (Farside) .100 [2.54] Typ. .098 [2.49] Related Product Data Mateable AMPMODU Products Pin Assemblies (Polarized/ Latching) — pages 236, 237 Pin Assemblies with Guide Ribs (installed in Panel Mount Pin Shroud) — pages 238, 239, 242 Headers (Polarized/Latching) — pages 244-252 Interchangeable Crimp Contacts (Short Point) — page 253 Application Tooling — page 273 Performance Specifications — page 225 Technical Documents — pages 277, 278 Product Specification 108-25034 Application Specification 114-25026 230 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System MTE Receptacle Assemblies—Strip Form Polarized/Latching, Single-Row, .100 [2.54] Centerline (Continued) Dimensions No. of Pos. 2 3 4 5 6 7 8 9 10 11 12 A B 2.000 [50.80] .198 [5.03] 2.400 [60.96] .298 [7.57] 1.990 [50.55] .398 [10.11] 1.990 [50.55] .498 [12.65] 2.390 [60.71] .598 [15.19] 1.400 [35.56] .698 [17.73] 1.600 [40.64] .798 [20.27] 1.800 [45.72] .898 [22.81] 2.000 [50.80] .998 [23.35] 2.200 [55.88] 1.098 [27.89] 2.400 [60.96] 1.198 [30.43] Housing Quantities Per Strip Segment 10 8 5 4 4 2 2 2 2 2 2 Strip Form Receptacle Assembly 30-26 AWG [0.05-0.15mm2] Wire Plating A Plating B Plating C 5-103961-1 5-103961-2 5-103961-3 5-103961-4 5-103961-5 5-103961-6 5-103961-7 5-103961-8 5-103961-9 6-103961-0 6-103961-1 5-103960-1 5-103960-2 5-103960-3 5-103960-4 5-103960-5 5-103960-6 5-103960-7 5-103960-8 5-103960-9 6-103960-0 6-103960-1 5-103959-1 5-103959-2 5-103959-3 5-103959-4 5-103959-5 5-103959-6 5-103959-7 5-103959-8 5-103959-9 6-103959-0 6-103959-1 Strip Form Receptacle Assembly 26-22 AWG [0.12-0.3mm2] Wire Plating A Plating B Plating C 5-103958-1 5-103958-2 5-103958-3 5-103958-4 5-103958-5 5-103958-6 5-103958-7 5-103958-8 5-103958-9 6-103958-0 6-103958-1 5-103957-1 5-103957-2 5-103957-3 5-103957-4 5-103957-5 5-103957-6 5-103957-7 5-103957-8 5-103957-9 6-103957-0 6-103957-1 5-103956-1 5-103956-2 5-103956-3 5-103956-4 5-103956-5 5-103956-6 5-103956-7 5-103956-8 5-103956-9 6-103956-0 6-103956-1 Unloaded Housings 104257-1 104257-2 104257-3 104257-4 104257-5 104257-6 104257-7 104257-8 104257-9 1-104257-0 1-104257-1 MTE Receptacle Assemblies MTE Receptacle Assemblies—Individual Form Polarized/Latching, Single-Row, .100 [2.54] Centerline No. of Pos. Dimensions B 13 14 15 16 17 18 19 20 21 22 23 24 25 1.298 [32.96] 1.398 [35.51] 1.498 [38.05] 1.598 [40.59] 1.698 [43.13] 1.798 [45.67] 1.898 [48.20] 1.998 [50.75] 2.098 [53.29] 2.198 [55.83] 2.298 [58.37] 2.398 [60.91] 2.498 [63.45] Individual Receptacle Assembly 30-26 AWG [0.05-0.15mm2] Wire Individual Receptacle Assembly 26-22 AWG [0.12-0.3mm2] Wire Plating A Plating B Plating C Plating A Plating B Plating C 6-103897-2 6-103897-3 6-103897-4 6-103897-5 6-103897-6 6-103897-7 6-103897-8 6-103897-9 7-103897-0 7-103897-1 7-103897-2 7-103897-3 7-103897-4 6-103640-2 6-103640-3 6-103640-4 6-103640-5 6-103640-6 6-103640-7 6-103640-8 6-103640-9 7-103640-0 7-103640-1 7-103640-2 7-103640-3 7-103640-4 6-103641-2 6-103641-3 6-103641-4 6-103641-5 6-103641-6 6-103641-7 6-103641-8 6-103641-9 7-103641-0 7-103641-1 7-103641-2 7-103641-3 7-103641-4 6-103734-2 6-103734-3 6-103734-4 6-103734-5 6-103734-6 6-103734-7 6-103734-8 6-103734-9 7-103734-0 7-103734-1 7-103734-2 7-103734-3 7-103734-4 6-103644-2 6-103644-3 6-103644-4 6-103644-5 6-103644-6 6-103644-7 6-103644-8 6-103644-9 7-103644-0 7-103644-1 7-103644-2 7-103644-3 7-103644-4 6-103645-2 6-103645-3 6-103645-4 6-103645-5 6-103645-6 6-103645-7 6-103645-8 6-103645-9 7-103645-0 7-103645-1 7-103645-2 7-103645-3 7-103645-4 Unloaded Housings 1-104257-2 1-104257-3 1-104257-4 1-104257-5 1-104257-6 1-104257-7 1-104257-8 1-104257-9 2-104257-0 2-104257-1 2-104257-2 2-104257-3 2-104257-4 5 Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted into housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with Tyco Electronics pistol grip hand tool. 2. Use Extraction/Lance Reset Tool No. 843477-1 to remove receptacle contacts. 3. Keying plugs are available, see page 253. Note: All part numbers are RoHS compliant. 231 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System MTE Receptacle Assemblies—Guide Ribs, Single-Row, .100 [2.54] Centerline Receptacle Contacts (See Note 1) .520 [13.21] Preassembled housings in strip form are available in positions 2 thru 12. For ease of handling, positions 2 thru 5 are recommended when using the Tyco Electronics Manual Pistol Grip Tool. 1.120 [28.45] .600 [15.24] Material and Finish MTE Receptacle Assemblies Housing — Black thermoplastic, 94V-0 rated Contacts — Phosphor Bronze, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel Plating B — Duplex plated .000015 [0.00038] gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel Plating C — .000100 [0.00254] tin over .000050 [0.00127] nickel on entire contact Note: Insulation displacement contacts accept an insulation diameter of .030 [0.76] min. to .054 [1.37] max. with an insulation wall thickness of .015 [0.38] max. Mating post length for preloaded housings is .200 [5.08] min., .250 [6.35] max. 5 B Typ. A Position No. 1 Indicator (Farside) .100 [2.54] Typ .098 [2.49] Related Product Data Coupling Shrouds used with — Single-Row — page 240 Double-Row — page 241 Mateable AMPMODU Products (with Receptacle Assemblies Installed in Single-Row Coupling Shrouds) — Pin Assemblies (Polarized/ Latching) — pages 236, 237 Pin Assemblies with Guide Ribs (installed in Panel Mount Pin Shroud) — pages 238, 239, 242 Headers (Polarized/Latching) — pages 244-252 Mateable AMPMODU Products (with Receptacle Assemblies Installed in Double-Row Coupling Shrouds) — Headers, Shrouded, Double-Row (.318 [8.08] mating post length, .150 [3.81] end dimension) — pages 119-121, 124, 125, 128, 129, 131-133 Interchangeable Crimp Contacts— (Short Point) — page 253 Application Tooling — page 273 Performance Specifications — page 225 Technical Documents — pages 277, 278 Product Specification 108-25034 Application Specification 114-25026 232 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System MTE Receptacle Assemblies—Strip Form with Guide Ribs, Single-Row, .100 [2.54] Centerline (Continued) Dimensions No. of Pos. 2 3 4 5 6 7 8 9 10 11 12 A B 2.000 [50.80] .198 [5.03] 2.400 [60.96] .298 [7.57] 1.990 [50.55] .398 [10.11] 1.990 [50.55] .498 [12.65] 2.390 [60.71] .598 [15.19] 1.400 [35.56] .698 [17.73] 1.600 [40.64] .798 [20.27] 1.800 [45.72] .898 [22.81] 2.000 [50.80] .998 [23.35] 2.200 [55.88] 1.098 [27.89] 2.400 [60.96] 1.198 [30.43] Housing Quantities Per Strip Segment 10 8 5 4 4 2 2 2 2 2 2 Strip Form Receptacle Assembly 30-26 AWG [0.05-0.15mm2] Wire Plating A Plating B Plating C 5-103973-1 5-103973-2 5-103973-3 5-103973-4 5-103973-5 5-103973-6 5-103973-7 5-103973-8 5-103973-9 6-103973-0 6-103973-1 5-103972-1 5-103972-2 5-103972-3 5-103972-4 5-103972-5 5-103972-6 5-103972-7 5-103972-8 5-103972-9 6-103972-0 6-103972-1 5-103971-1 5-103971-2 5-103971-3 5-103971-4 5-103971-5 5-103971-6 5-103971-7 5-103971-8 5-103971-9 6-103971-0 6-103971-1 Strip Form Receptacle Assembly 26-22 AWG [0.12-0.3mm2] Wire Plating A Plating B Plating C 5-103970-1 5-103970-2 5-103970-3 5-103970-4 5-103970-5 5-103970-6 5-103970-7 5-103970-8 5-103970-9 6-103970-0 6-103970-1 5-103969-1 5-103969-2 5-103969-3 5-103969-4 5-103969-5 5-103969-6 5-103969-7 5-103969-8 5-103969-9 6-103969-0 6-103969-1 5-103968-1 5-103968-2 5-103968-3 5-103968-4 5-103968-5 5-103968-6 5-103968-7 5-103968-8 5-103968-9 6-103968-0 6-103968-1 Unloaded Housings 103648-1 103648-2 103648-3 103648-4 103648-5 103648-6 103648-7 103648-8 103648-9 1-103648-0 1-103648-1 MTE Receptacle Assemblies MTE Receptacle Assemblies—Individual Form with Guide Ribs, Single-Row, .100 [2.54] Centerline No. of Pos. Dimensions B 13 14 15 16 17 18 19 20 21 22 23 24 25 1.298 [32.96] 1.398 [35.51] 1.498 [38.05] 1.598 [40.59] 1.698 [43.13] 1.798 [45.67] 1.898 [48.20] 1.998 [50.75] 2.098 [53.29] 2.198 [55.83] 2.298 [58.37] 2.398 [60.91] 2.498 [63.45] Individual Receptacle Assembly 30-26 AWG [0.05-0.15mm2] Wire Individual Receptacle Assembly 26-22 AWG [0.12-0.3mm2] Wire Plating A Plating B Plating C Plating A Plating B Plating C 6-103901-2 6-103901-3 6-103901-4 6-103901-5 6-103901-6 6-103901-7 6-103901-8 6-103901-9 7-103901-0 7-103901-1 7-103901-2 7-103901-3 7-103901-4 6-103649-2 6-103649-3 6-103649-4 6-103649-5 6-103649-6 6-103649-7 6-103649-8 6-103649-9 7-103649-0 7-103649-1 7-103649-2 7-103649-3 7-103649-4 6-103650-2 6-103650-3 6-103650-4 6-103650-5 6-103650-6 6-103650-7 6-103650-8 6-103650-9 7-103650-0 7-103650-1 7-103650-2 7-103650-3 7-103650-4 6-103900-2 6-103900-3 6-103900-4 6-103900-5 6-103900-6 6-103900-7 6-103900-8 6-103900-9 7-103900-0 7-103900-1 7-103900-2 7-103900-3 7-103900-4 6-103651-2 6-103651-3 6-103651-4 6-103651-5 6-103651-6 6-103651-7 6-103651-8 6-103651-9 7-103651-0 7-103651-1 7-103651-2 7-103651-3 7-103651-4 6-103652-2 6-103652-3 6-103652-4 6-103652-5 6-103652-6 6-103652-7 6-103652-8 6-103652-9 7-103652-0 7-103652-1 7-103652-2 7-103652-3 7-103652-4 Unloaded Housings 1-103648-2 1-103648-3 1-103648-4 1-103648-5 1-103648-6 1-103648-7 1-103648-8 1-103648-9 2-103648-0 2-103648-1 2-103648-2 2-103648-3 2-103648-4 5 Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted into housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with Tyco Electronics pistol grip hand tool. 2. Use Extraction/Lance Reset Tool No. 843477-1 to remove receptacle contacts. 3. Keying plugs are available, see page 253. Note: All part numbers are RoHS compliant. 233 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System MTE High Pressure Receptacle Assemblies—Plain, Single-Row, .100 [2.54] Centerline Receptacle Contacts (See Note 1) .520 [13.21] 1.120 [28.45] Preassembled housings in strip form are available in positions 2 thru 12. For ease of handling, positions 2 thru 5 are recommended when using the Tyco Electronics Manual Pistol Grip Tool. .600 [15.24] Material and Finish B Typ. MTE Receptacle Assemblies Housing — Black thermoplastic, 94V-0 rated Contacts — Phosphor Bronze, duplex plated .000030 [0.00076] gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel Note: Insulation displacement contacts accept an insulation diameter of .030 [0.76] min. to .054 [1.37] max. with an insulation wall thickness of .015 [0.38] max. Mating post length for preloaded housings is .200 [5.08] min., .250 [6.35] max. A Position No. 1 Indicator (Farside) .100 [2.54] Typ. .098 [2.49] Related Product Data 5 Mateable AMPMODU Products Breakaway Headers — pages 102110, (with .230 mating length) Reeled Breakaway Headers — pages 106, 107 (with .230 mating length) Machine Applied Bandolier Posts — page 163 Application Tooling — page 273 Performance Specifications — page 225 Technical Documents — pages 277, 278) Product Specification 108-25034 Application Specification 114-25026 No. of Pos. A B Housings Quantities Per Strip Segment 2 3 4 5 6 7 8 9 10 11 12 1.980 [50.29] 1.490 [37.85] 1.990 [50.55] 1.990 [50.55] 2.390 [60.71] 1.400 [35.56] 1.600 [40.64] 1.800 [45.72] 2.000 [50.80] 2.200 [55.88] 2.400 [60.96] .198 [5.03] .298 [7.57] .398 [10.11] .498 [12.65] .598 [15.19] .698 [17.73] .798 [20.27] .898 [22.81] .998 [23.35] 1.098 [27.89] 1.198 [30.43] 10 5 5 4 4 2 2 2 2 2 2 Dimensions Strip Form Receptacle Assembly 30-26 AWG [.05-.15mm2] Wire 5-104438-1 5-104438-2 5-104438-3 5-104438-4 5-104438-5 5-104438-6 5-104438-7 5-104438-8 5-104438-9 6-104438-0 6-104438-1 Strip Form Receptacle Assembly 26-22 AWG [.12-.30mm2] Wire 5-104439-1 5-104439-2 5-104439-3 5-104439-4 5-104439-5 5-104439-6 5-104439-7 5-104439-8 5-104439-9 6-104439-0 6-104439-1 Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted into housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with Tyco Electronics pistol grip hand tool. 2. High pressure receptacle contacts can be made available in other housing styles and position sizes. Contact your Tyco Electronics sales representative. Note: All part numbers are RoHS compliant. 234 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System MTE High Pressure Receptacle Assemblies – Guide Ribs Receptacle Contacts (See Note 1) .520 [13.21] 1.120 [28.45] Preassembled housings in strip form are available in positions 2 thru 12. For ease of handling, positions 2 thru 5 are recommended when using the Tyco Electronics Manual Pistol Grip Tool. .600 [15.24] B Typ. Material and Finish A Housing — Thermoplastic, black, 94V-0 rated Contacts — Phosphor Bronze, duplex plated .000030 [0.00076] gold on contact area, .000050 [0.00127] min. tin on crimp area, with entire contact underplated .000050 [0.00127] nickel. Position No. 1 Indicator (Farside) .100 [2.54] Typ MTE Pin Assemblies Related Product Data Coupling Shrouds used with — Single-Row — page 240 Double-Row — page 241 Mateable AMPMODU Products (with Receptacle Assemblies Installed in Single-Row Coupling Shrouds) — Pin Assemblies (Polarized/ Latching) — pages 236, 237 Pin Assemblies with Guide Ribs (installed in Panel Mount Pin Shroud) — pages 238, 239, 242 Headers (Polarized/Latching) — pages 244-252 Mateable AMPMODU Products (with Receptacle Assemblies Installed in Double-Row Coupling Shrouds) — Headers, Shrouded, Double-Row (.318 [8.08] mating post length, .150 [3.81] end dimension) — pages 119-121, 124, 125, 128, 129, 131-133 Application Tooling — page 273 Performance Specifications — page 225 Technical Documents — pages 277, 278 Product Specification 108-25034 Application Specification 114-25026 .098 [2.49] 5 No. of Pos. A B Housings Quantities Per Strip Segment 2 3 4 5 6 7 8 9 10 11 12 1.980 [50.29] 1.490 [37.85] 1.990 [50.55] 1.990 [50.55] 2.390 [60.71] 1.400 [35.56] 1.600 [40.64] 1.800 [45.72] 2.000 [50.80] 2.200 [55.88] 2.400 [60.96] .198 [5.03] .298 [7.57] .398 [10.11] .498 [12.65] .598 [15.19] .698 [17.73] .798 [20.27] .898 [22.81] .998 [23.35] 1.098 [27.89] 1.198 [30.43] 10 5 5 4 4 2 2 2 2 2 2 Dimensions Strip Form Receptacle Assembly 30-26 AWG [.05-.15mm2] Wire 5-147396-1 5-147396-2 5-147396-3 5-147396-4 5-147396-5 5-147396-6 5-147396-7 5-147396-8 5-147396-9 6-147396-0 6-147396-1 Strip Form Receptacle Assembly 26-22 AWG [.12-.30mm2] Wire 5-147030-3 5-147030-4 5-147030-1 5-147030-2 5-147030-5 5-147030-6 5-147030-7 5-147030-8 5-147030-9 6-147030-0 6-147030-1 Note: All part numbers are RoHS compliant. 235 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System MTE Pin Assemblies, Shrouded—Polarized/Latching, Single-Row, .100 [2.54] Centerline Pin Contacts (See Note 1) .520 [13.21] Preassembled housings in strip form are available in positions 2 thru 12. For ease of handling, positions 2 thru 5 are recommended when using the Tyco Electronics Manual Pistol Grip Tool. 1.470 [37.34] Material and Finish MTE Pin Assemblies Housing — Black thermoplastic, 94V-0 rated Contacts — Phosphor Bronze, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel Plating B — Duplex plated .000015 [0.00038] gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel Plating C — .000100 [0.00254] tin over .000050 [0.00127] nickel on entire contact Note: Insulation displacement contacts accept an insulation diameter of .030 [0.76] min. to .054 [1.37] max. with an insulation wall thickness of .015 [0.38] max. 5 .950 [24.13] B Typ. Position No. 1 Indicator A .260 [6.60] .100 [2.54] Typ. .200 [5.08] Related Product Data Mateable AMPMODU Products — Receptacle Assemblies (Polarized/Latching) — pages 230, 231 Receptacle Assemblies with Guide Ribs (installed in Single-Row Coupling Shroud) — pages 232, 233, 235, 240 Interchangeable Crimp Contacts — page 254 Application Tooling — page 273 Performance Specifications — page 225 Technical Documents — pages 277, 278 Product Specification 108-25034 Application Specification 114-25026 236 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System MTE Pin Assemblies, Shrouded—Strip Form Polarized/Latching, Single-Row, .100 [2.54] Centerline (Continued) Dimensions No. of Pos. 2 3 4 5 6 7 8 9 10 11 12 A B 2.360 [59.94] .295 [7.49] 1.980 [50.29] .395 [10.03] 1.980 [50.29] .495 [12.57] 2.380 [60.45] .595 [15.11] 1.390 [35.31] .695 [17.65] 2.390 [60.71] .795 [20.19] 1.790 [45.47] .895 [22.73] 1.990 [50.57] .995 [25.27] 2.190 [55.63] 1.095 [27.81] 2.390 [60.71] 1.195 [30.35] 2.590 [65.79] 1.295 [32.89] Housing Quantities Per Strip Segment 8 5 4 4 2 3 2 2 2 2 2 Strip Form Pin Assembly 30-26 AWG [0.05-0.15mm2] Wire Plating A Plating B Plating C 5-103949-1 5-103949-2 5-103949-3 5-103949-4 5-103949-5 5-103949-6 5-103949-7 5-103949-8 5-103949-9 6-103949-0 6-103949-1 5-103948-1 5-103948-2 5-103948-3 5-103948-4 5-103948-5 5-103948-6 5-103948-7 5-103948-8 5-103948-9 6-103948-0 6-103948-1 5-103947-1 5-103947-2 5-103947-3 5-103947-4 5-103947-5 5-103947-6 5-103947-7 5-103947-8 5-103947-9 6-103947-0 6-103947-1 Strip Form Pin Assembly 26-22 AWG [0.12-0.3mm2] Wire Plating A Plating B Plating C 5-103946-1 5-103946-2 5-103946-3 5-103946-4 5-103946-5 5-103946-6 5-103946-7 5-103946-8 5-103946-9 6-103946-0 6-103946-1 5-103945-1 5-103945-2 5-103945-3 5-103945-4 5-103945-5 5-103945-6 5-103945-7 5-103945-8 5-103945-9 6-103945-0 6-103945-1 5-103944-1 5-103944-2 5-103944-3 5-103944-4 5-103944-5 5-103944-6 5-103944-7 5-103944-8 5-103944-9 6-103944-0 6-103944-1 Unloaded Housings 103653-1 103653-2 103653-3 103653-4 103653-5 103653-6 103653-7 103653-8 103653-9 1-103653-0 1-103653-1 MTE Pin Assemblies MTE Pin Assemblies, Shrouded—Individual Form Polarized/Latching, Single-Row, .100 [2.54] Centerline No. of Pos. Dimensions B 13 14 15 16 17 18 19 20 21 22 23 24 25 1.395 [35.43] 1.495 [37.97] 1.595 [40.51] 1.695 [43.05] 1.795 [45.59] 1.895 [48.13] 1.995 [50.67] 2.095 [53.21] 2.195 [55.75] 2.295 [58.29] 2.395 [60.83] 2.495 [63.37] 2.595 [65.91] Individual Pin Assembly 30-26 AWG [0.05-0.15mm2] Wire Individual Pin Assembly 26-22 AWG [0.12-0.3mm2] Wire Plating A Plating B Plating C Plating A Plating B Plating C 6-103894-2 6-103894-3 6-103894-4 6-103894-5 6-103894-6 6-103894-7 6-103894-8 6-103894-9 7-103894-0 7-103894-1 7-103894-2 7-103894-3 7-103894-4 6-103658-2 6-103658-3 6-103658-4 6-103658-5 6-103658-6 6-103658-7 6-103658-8 6-103658-9 7-103658-0 7-103658-1 7-103658-2 7-103658-3 7-103658-4 6-103659-2 6-103659-3 6-103659-4 6-103659-5 6-103659-6 6-103659-7 6-103659-8 6-103659-9 7-103659-0 7-103659-1 7-103659-2 7-103659-3 7-103659-4 6-103893-2 6-103893-3 6-103893-4 6-103893-5 6-103893-6 6-103893-7 6-103893-8 6-103893-9 7-103893-0 7-103893-1 7-103893-2 7-103893-3 7-103893-4 6-103660-2 6-103660-3 6-103660-4 6-103660-5 6-103660-6 6-103660-7 6-103660-8 6-103660-9 7-103660-0 7-103660-1 7-103660-2 7-103660-3 7-103660-4 6-103661-2 6-103661-3 6-103661-4 6-103661-5 6-103661-6 6-103661-7 6-103661-8 6-103661-9 7-103661-0 7-103661-1 7-103661-2 7-103661-3 7-103661-4 Unloaded Housings 1-103653-2 1-103653-3 1-103653-4 1-103653-5 1-103653-6 1-103653-7 1-103653-8 1-103653-9 2-103653-0 2-103653-1 2-103653-2 2-103653-3 2-103653-4 5 Notes: 1. Pin assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted into housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with Tyco Electronics pistol grip hand tool. 2. Use Extraction/Lance Reset Tool No. 843477-1 to remove pin contacts. Note: All part numbers are RoHS compliant. 237 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System MTE Pin Assemblies—Guide Ribs, Single-Row, .100 [2.54] Centerline Pin Contacts (See Note 1) .520 [13.21] Preassembled housings in strip form are available in positions 2 thru 12. For ease of handling, positions 2 thru 5 are recommended when using the Tyco Electronics Manual Pistol Grip Tool. Material and Finish MTE Pin Assemblies Housing — Black thermoplastic, 94V-0 rated Contacts — Phosphor Bronze, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel Plating B — Duplex plated .000015 [0.00038] gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel Plating C — .000100 [0.00254] tin over .000050 [0.00127] nickel on entire contact Note: Insulation displacement contacts accept an insulation diameter of .030 [0.76] min. to .054 [1.37] max. with an insulation wall thickness of .015 [0.38] max. 5 1.120 [28.45] .600 [15.24] B Typ. Position No. 1 Indicator (Farside) A .100 [2.54] Typ. .098 [2.49] Related Product Data Mateable AMPMODU MTE Products (with Pin Assembly Installed in Panel Mount Pin Shroud) — pages 242, 243 Receptacle Assemblies (Polarized/Latching) — pages 230, 231 Receptacle Assemblies with Guide Ribs (installed in Single Row Coupling Shroud) — pages 232, 233, 235, 240 Interchangeable Crimp Contacts — page 254 Application Tooling — page 273 Performance Specifications — page 225 Technical Documents — pages 277, 278 Product Specification 108-25034 Application Specification 114-25026 238 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System MTE Pin Assemblies—Strip Form with Guide Ribs, Single-Row, .100 [2.54] Centerline (Continued) Dimensions No. of Pos. A 2 3 4 5 6 7 8 9 10 11 12 1.980 [50.29] 1.490 [37.85] 1.990 [50.55] 1.990 [50.55] 2.390 [60.71] 1.400 [35.56] 1.600 [40.64] 1.800 [45.72] 2.000 [50.80] 2.200 [55.88] 2.400 [60.96] B 0.198 [5.03] 0.298 [7.57] 0.398 [10.11] 0.498 [12.65] 0.598 [15.19] 0.698 [17.73] 0.798 [20.27] 0.898 [22.81] 0.998 [25.35] 1.098 [27.89] 1.198 [30.43] Housing Quantities Per Strip Segment 10 5 5 4 4 2 2 2 2 2 2 Strip Form Pin Assembly 30-26 AWG [0.05-0.15mm2] Wire Plating A Plating B Plating C 5-103955-1 5-103955-2 5-103955-3 5-103955-4 5-103955-5 5-103955-6 5-103955-7 5-103955-8 5-103955-9 6-103955-0 6-103955-1 5-103954-1 5-103954-2 5-103954-3 5-103954-4 5-103954-5 5-103954-6 5-103954-7 5-103954-8 5-103954-9 6-103954-0 6-103954-1 5-103953-1 5-103953-2 5-103953-3 5-103953-4 5-103953-5 5-103953-6 5-103953-7 5-103953-8 5-103953-9 6-103953-0 6-103953-1 Strip Form Pin Assembly 26-22 AWG [0.12-0.3mm2] Wire Plating A Plating B Plating C 5-103952-1 5-103952-2 5-103952-3 5-103952-4 5-103952-5 5-103952-6 5-103952-7 5-103952-8 5-103952-9 6-103952-0 6-103952-1 5-103951-1 5-103951-2 5-103951-3 5-103951-4 5-103951-5 5-103951-6 5-103951-7 5-103951-8 5-103951-9 6-103951-0 6-103951-1 5-103950-1 5-103950-2 5-103950-3 5-103950-4 5-103950-5 5-103950-6 5-103950-7 5-103950-8 5-103950-9 6-103950-0 6-103950-1 Unloaded Housings 104503-1 104503-2 104503-3 104503-4 104503-5 104503-6 104503-7 104503-8 104503-9 1-104503-0 1-104503-1 MTE Pin Assemblies MTE Pin Assemblies—Individual Form with Guide Ribs, Single-Row, .100 [2.54] Centerline No. of Pos. Dimensions B 13 14 15 16 17 18 19 20 21 22 23 24 25 1.398 [35.51] 1.498 [38.05] 1.598 [40.59] 1.698 [43.13] 1.798 [45.67] 1.898 [48.20] 1.998 [50.75] 2.098 [53.29] 2.198 [55.83] 2.298 [58.37] 2.398 [60.91] 2.498 [63.45] 2.598 [65.99] Individual Pin Assembly 30-26 AWG [0.05-0.15mm2] Wire Individual Pin Assembly 26-22 AWG [0.12-0.3mm2] Wire Plating A Plating B Plating C Plating A Plating B Plating C 6-103896-2 6-103896-3 6-103896-4 6-103896-5 6-103896-6 6-103896-7 6-103896-8 6-103896-9 7-103896-0 7-103896-1 7-103896-2 7-103896-3 7-103896-4 6-103657-2 6-103657-3 6-103657-4 6-103657-5 6-103657-6 6-103657-7 6-103657-8 6-103657-9 7-103657-0 7-103657-1 7-103657-2 7-103657-3 7-103657-4 6-103656-2 6-103656-3 6-103656-4 6-103656-5 6-103656-6 6-103656-7 6-103656-8 6-103656-9 7-103656-0 7-103656-1 7-103656-2 7-103656-3 7-103656-4 6-103895-2 6-103895-3 6-103895-4 6-103895-5 6-103895-6 6-103895-7 6-103895-8 6-103895-9 7-103895-0 7-103895-1 7-103895-2 7-103895-3 7-103895-4 6-103655-2 6-103655-3 6-103655-4 6-103655-5 6-103655-6 6-103655-7 6-103655-8 6-103655-9 7-103655-0 7-103655-1 7-103655-2 7-103655-3 7-103655-4 6-103654-2 6-103654-3 6-103654-4 6-103654-5 6-103654-6 6-103654-7 6-103654-8 6-103654-9 7-103654-0 7-103654-1 7-103654-2 7-103654-3 7-103654-4 Unloaded Housings 1-104503-2 1-104503-3 1-104503-4 1-104503-5 1-104503-6 1-104503-7 1-104503-8 1-104503-9 2-104503-0 2-104503-1 2-104503-2 2-104503-3 2-104503-4 5 Notes: 1. Pin assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted into housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with Tyco Electronics pistol grip hand tool. 2. Use Extraction/Lance Reset Tool No. 843477-1 to remove pin contacts. Note: All part numbers are RoHS compliant. 239 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Coupling Shrouds for MTE Receptacle Assemblies with Guide Ribs Single-Row .307 [7.80] A Material Black thermoplastic, 94V-0 rated .582 [14.78] Technical Documents — pages 277, 278 No. of Pos. 4 5 6 7 8 9 10 11 12 13 14 Dimension A .485 [12.32] .585 [14.86] .685 [17.40] .785 [19.94] .885 [22.48] .985 [25.02] 1.085 [27.56] 1.185 [30.10] 1.285 [32.64] 1.385 [35.18] 1.485 [37.72] Single-Row Coupling Shroud 103680-1 103680-2 103680-3 103680-4 103680-5 103680-6 103680-7 103680-8 103680-9 1-103680-0 1-103680-1 MTE Coupling Shrouds Product Specification 108-25034 Application Specification 114-25026 No. of Pos. 15 16 17 18 19 20 21 22 23 24 25 Dimension A 1.585 [40.26] 1.685 [42.80] 1.785 [45.34] 1.885 [47.88] 1.985 [50.42] 2.085 [52.96] 2.185 [55.50] 2.285 [58.04] 2.385 [60.58] 2.485 [63.12] 2.585 [65.66] Single-Row Coupling Shroud 1-103680-2 1-103680-3 1-103680-4 1-103680-5 1-103680-6 1-103680-7 1-103680-8 1-103680-9 2-103680-0 2-103680-1 2-103680-2 Pin Assemblies with Guide Ribs, Installed in Panel Mount Pin Shroud (Refer to pages 238, 239 & 242) Pin Assembly, Shrouded Polarized/Latching (Refer to pages 236 & 237) 5 Receptacle Assemblies with Guide Ribs (Refer to pages 232, 233, 235) Single-Row Coupling Shroud Headers, Polarized/Latching, Straight and Right Angle Post, with or without Holddown (See pages 244-252) Typical Application of Single-Row Coupling Shroud and Mating AMPMODU MTE Products Note: All part numbers are RoHS compliant. 240 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Coupling Shrouds for MTE Receptacle Assemblies with Guide Ribs (Continued) Double-Row Material .735 [18.67] Black thermoplastic, 94V-0 rated Technical Documents — Position No. 1 Identification pages 277, 278 A Product Specification 108-25034 Application Specification 114-25026 Dimension A .585 [14.86] .685 [17.40] .785 [19.94] .885 [22.48] .985 [25.02] 1.085 [27.56] 1.185 [30.10] 1.285 [32.64] 1.385 [35.18] 1.485 [37.72] 1.585 [40.26] 1.685 [42.80] 1.785 [45.34] 1.885 [47.88] 2.185 [55.50] 2.685 [68.20] Double-Row Coupling Shroud 103681-1 103681-2 103681-3 103681-4 103681-5 104500-1 104500-2 104500-3 104500-4 104500-5 104500-6 104500-7 104500-8 104500-9 1-104500-0 1-104500-1 MTE Coupling Shrouds No. of Pos. 8 10 12 14 16 18 20 22 24 26 28 30 32 34 40 50 5 AMPMODU Shrouded Headers Double-Row, Straight or Right–Angle Post1 Double-Row Coupling Shroud Receptacle Assemblies with Guide Ribs (Refer to pages 232, 233 & 235) Mating AMPMODU Double-Row Shrouded Headers must have .318 [8.08] mating post length and .150 [3.81] dimension from centerline of last post to inside of end shroud wall. 1 1 Typical Application of Double-Row Coupling Shroud and Mating AMPMODU Products Note: All part numbers are RoHS compliant. 241 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Panel Mount Pin Shrouds for MTE Pin Assemblies with Guide Ribs, Single-Row Material .310 [7.87] Black thermoplastic, 94V-0 rated A .250 [6.35] Technical Documents — pages 277, 278 Product Specification 108-25034 Application Specification 114-25026 .990 [25.15] Position No. 1 Identification MTE Panel Mount Pin Shrouds .320 [8.13] .270 [6.86] .320 [8.13] B 5 No. of Pos. 2 3 4 5 6 7 8 9 10 11 12 13 Dimensions A B .735 [18.67] .625 [15.88] .835 [21.21] .725 [18.42] .935 [23.75] .825 [20.96] 1.035 [26.29] .925 [23.50] 1.135 [28.83] 1.025 [26.04] 1.235 [31.37] 1.125 [28.58] 1.335 [33.91] 1.225 [31.12] 1.435 [36.45] 1.325 [33.66] 1.535 [38.99] 1.425 [36.20] 1.635 [41.53] 1.525 [38.74] 1.735 [44.07] 1.625 [41.28] 1.835 [46.61] 1.725 [43.82] Panel Mount Pin Shroud 103682-1 103682-2 103682-3 103682-4 103682-5 103682-6 103682-7 103682-8 103682-9 1-103682-0 1-103682-1 1-103682-2 No. of Pos. 14 15 16 17 18 19 20 21 22 23 24 25 Dimensions A B 1.935 [49.15] 1.825 [46.36] 2.035 [51.69] 1.925 [48.90] 2.135 [54.23] 2.025 [51.44] 2.235 [56.77] 2.125 [53.98] 2.335 [59.31] 2.225 [56.52] 2.435 [61.85] 2.325 [59.06] 2.535 [64.39] 2.425 [61.60] 2.635 [66.93] 2.525 [64.14] 2.735 [69.47] 2.625 [66.68] 2.835 [72.01] 2.725 [69.22] 2.935 [74.55] 2.825 [71.76] 3.035 [77.09] 2.925 [74.30] Panel Mount Pin Shroud 1-103682-3 1-103682-4 1-103682-5 1-103682-6 1-103682-7 1-103682-8 1-103682-9 2-103682-0 2-103682-1 2-103682-2 2-103682-3 2-103682-4 Note: All part numbers are RoHS compliant. 242 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Panel Mount Pin Shrouds for MTE Pin Assemblies with Guide Ribs, Single-Row (Continued) Material Black thermoplastic, 94V-0 rated Technical Documents — pages 277, 278 Pin Assembly with Guide Ribs (Refer to pages 238 & 239) Product Specification 108-25034 Application Specification 114-25026 Panel Mount Pin Shroud Receptacle Assemblies with Guide Ribs, Installed in Single-Row Coupling Shroud (Refer to pages 232, 233, 235 & 240) Rear of Panel MTE Panel Mount Pin Shrouds Receptacle Assembly, Polarized/Latching (Refer to pages 230 & 231) Typical Application of Panel Mount Pin Shroud and Mating AMPMODU Products 5 243 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System MTE Headers, Shrouded Polarized/Latching, Single-Row .100 [2.54] Centerline .025 [0.64] Square Straight Post (With or Without Swaged Tail) .535 [13.59] Swaged Retention Tail (See Note) Position No. 1 Indicator A Material and Finish Housing — Black thermoplastic, 94V-0 rated Posts — Brass, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000100 [0.00254] min. tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating B — Duplex plated .000015 [0.00038] gold on contact area, .000100 [0.00254] min. tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating C — .000100 [0.00254] tin over .000050 [0.00127] nickel on entire post MTE Headers .230 [5.84] B C .060 [1.52] X .200 [5.08] .120 [3.05] .100 Typ. [2.54] .200 Ref. [5.08] (Contact Area) .100 [2.54] .130 [3.30] .275 [6.98] .350 [8.89] X .060 [1.52] Section X-X C .100* Typ. [2.54] Related Product Data 5 Mateable AMPMODU MTE Products — Receptacle Assemblies (Polarized/Latching) — pages 230, 231 Receptacle Assemblies with Guide Ribs (installed in Single-Row Coupling Shroud) — pages 232, 233, 235, 240 .035±.003 Dia. Typ. [0.89±0.08] or .040±.003 Dia. Typ. [1.02±0.08] (for Retention Tails) Recommended PC Board Hole Layout *±.003 [±0.08]; tolerances not to accumulate within one connector pattern. Note: Swaged retention tails are provided in a minimum of two locations per header. Technical Documents — pages 277, 278 Product Specification 108-25034 Application Specification 114-25026 244 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System MTE Headers, Shrouded Polarized/Latching, Single-Row .100 [2.54] Centerline (Continued) A .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.300 [33.02] 1.400 [35.56] 1.500 [38.10] 1.600 [40.64] 1.700 [43.18] 1.800 [45.72] 1.900 [48.26] 2.000 [50.80] 2.100 [53.34] 2.200 [55.88] 2.300 [58.42] 2.400 [60.96] 2.500 [63.50] 2.600 [66.04] Dimensions B C .220 [5.59] .100 [2.54] .320 [8.13] .200 [5.08] .420 [10.67] .300 [7.62] .520 [13.21] .400 [10.16] .620 [15.75] .500 [12.70] .720 [18.29] .600 [15.24] .820 [20.83] .700 [17.78] .920 [23.37] .800 [20.32] 1.020 [25.91] .900 [22.86] 1.120 [28.45] 1.000 [25.40] 1.220 [30.99] 1.100 [27.94] 1.320 [33.53] 1.200 [30.48] 1.420 [36.07] 1.300 [33.02] 1.520 [38.61] 1.400 [35.56] 1.620 [41.15] 1.500 [38.10] 1.720 [43.69] 1.600 [40.64] 1.820 [46.23] 1.700 [43.18] 1.920 [48.77] 1.800 [45.72] 2.020 [51.31] 1.900 [48.26] 2.120 [53.85] 2.000 [50.80] 2.220 [56.39] 2.100 [53.34] 2.320 [58.93] 2.200 [55.88] 2.420 [61.47] 2.300 [58.42] 2.520 [64.01] 2.400 [60.96] Polarized/Latching Header With Swage Plating A Plating B Plating C 5-103908-1 5-104362-1 5-103669-1 5-103908-2 5-104362-2 5-103669-2 5-103908-3 5-104362-3 5-103669-3 5-103908-4 5-104362-4 5-103669-4 5-103908-5 5-104362-5 5-103669-5 5-103908-6 5-104362-6 5-103669-6 5-103908-7 5-104362-7 5-103669-7 5-103908-8 5-104362-8 5-103669-8 5-103908-9 5-104362-9 5-103669-9 6-103908-0 6-104362-0 6-103669-0 6-103908-1 6-104362-1 6-103669-1 6-103908-2 6-104909-2 6-103669-2 6-103908-3 6-104909-3 6-103669-3 6-103908-4 6-104909-4 6-103669-4 6-103908-5 6-104909-5 6-103669-5 6-103908-6 6-104909-6 6-103669-6 6-103908-7 6-104909-7 6-103669-7 6-103908-8 6-104909-8 6-103669-8 6-103908-9 6-104909-9 6-103669-9 7-103908-0 7-104909-0 7-103669-0 7-103908-1 7-104909-1 7-103669-1 7-103908-2 7-104909-2 7-103669-2 7-103908-3 7-104909-3 7-103669-3 7-103908-4 7-104909-4 7-103669-4 Polarized/Latching Header Without Swage Plating A Plating B Plating C 5-103735-1 5-104363-1 5-103639-1 5-103735-2 5-104363-2 5-103639-2 5-103735-3 5-104363-3 5-103639-3 5-103735-4 5-104363-4 5-103639-4 5-103735-5 5-104363-5 5-103639-5 5-103735-6 5-104363-6 5-103639-6 5-103735-7 5-104363-7 5-103639-7 5-103735-8 5-104363-8 5-103639-8 5-103735-9 5-104363-9 5-103639-9 6-103735-0 6-104363-0 6-103639-0 6-103735-1 6-104363-1 6-103639-1 6-103735-2 6-104910-2 6-103639-2 6-103735-3 6-104910-3 6-103639-3 6-103735-4 6-104910-4 6-103639-4 6-103735-5 6-104910-5 6-103639-5 6-103735-6 6-104910-6 6-103639-6 6-103735-7 6-104910-7 6-103639-7 6-103735-8 6-104910-8 6-103639-8 6-103735-9 6-104910-9 6-103639-9 7-103735-0 7-104910-0 7-103639-0 7-103735-1 7-104910-1 7-103639-1 7-103735-2 7-104910-2 7-103639-2 7-103735-3 7-104910-3 7-103639-3 7-103735-4 7-104910-4 7-103639-4 MTE Headers No. of Pos. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Notes: 1. Selectively loaded headers are available, consult Tyco Electronics. 2. Use Keying Tool No. 91417-1 to remove post for keying. 5 Note: All part numbers are RoHS compliant. 245 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline .025 [0.64] Square Right-Angle Post With Holddown .535 [13.59] Position No. 1 Indicator A B C Material and Finish MTE Headers Housing — Black thermoplastic, 94V-0 rated Posts — Brass, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000100 [0.00254] min. tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating B — Duplex plated .000015 [0.00038] gold on contact area, .000100 [0.00254] min. tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating C — .000100 [0.00254] tin over .000050 [0.00127] nickel on entire post .060 [1.52] .100 Typ. [2.54] X .100 [2.54] .230 [5.84] .200 Ref. [5.08] (Contact Area) .200 [5.08] .365 [9.27] .275 [6.99] .130 [3.30] .120 [3.05] X .060 [1.52] .134±.003 Dia. [3.40±0.08] (2 Plc.) .340±.003 Typ. [8.64±0.08] .100* Typ. [2.54] .350 [8.89] .145 [3.68] Section X-X .055±.003 Typ. [1.40±0.08] .035±.003 Dia. Typ. [0.89±0.08] C Recommended PC Board Hole Layout (PC board thickness (for Holddown Feature) is .062±.008 [1.57±0.20]) *±.003 [±0.08]; tolerance not to accumulate within one connector pattern. 5 Without Holddown .535 [13.59] Related Product Data Position No. 1 Indicator Mateable AMPMODU MTE Products — Receptacle Assemblies (Latching) — pages 230, 231 Receptacle Assemblies with Guide Ribs (installed in Single-Row Coupling Shroud) — pages 232, 233, 235, 240 Technical Documents — pages 277, 278 Product Specification 108-25034 Application Specification 114-25026 A B .060 [1.52] C .100 Typ. [2.54] X .100 [2.54] .230 [5.84] .200 Ref. [5.08] (Contact Area) .200 .275 [5.08] [6.99] .130 [3.30] .120 [3.05] .060 [1.52] X .350 [8.89] C .145 [3.68] Section X-X .100* Typ. [2.54] .035±.003 Dia. Typ. [0.89±0.08] Recommended PC Board Hole Layout *±.003 [±0.08]; tolerance not to accumulate within one connector pattern. 246 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline (Continued) No. of Pos. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 A .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.300 [33.02] 1.400 [35.56] 1.500 [38.10] 1.600 [40.64] 1.700 [43.18] 1.800 [45.72] 1.900 [48.26] 2.000 [50.80] 2.100 [53.34] 2.200 [55.88] 2.300 [58.42] 2.400 [60.96] 2.500 [63.50] 2.600 [66.04] Dimensions B C .220 [5.59] .100 [2.54] .320 [8.13] .200 [5.08] .420 [10.67] .300 [7.62] .520 [13.21] .400 [10.16] .620 [15.75] .500 [12.70] .720 [18.29] .600 [15.24] .820 [20.83] .700 [17.78] .920 [23.37] .800 [20.32] 1.020 [25.91] .900 [22.86] 1.120 [28.45] 1.000 [25.40] 1.220 [30.99] 1.100 [27.94] 1.320 [33.53] 1.200 [30.48] 1.420 [36.07] 1.300 [33.02] 1.520 [38.61] 1.400 [35.56] 1.620 [41.15] 1.500 [38.10] 1.720 [43.69] 1.600 [40.64] 1.820 [46.23] 1.700 [43.18] 1.920 [48.77] 1.800 [45.72] 2.020 [51.31] 1.900 [48.26] 2.120 [53.85] 2.000 [50.80] 2.220 [56.39] 2.100 [53.34] 2.320 [58.93] 2.200 [55.88] 2.420 [61.47] 2.300 [58.42] 2.520 [64.01] 2.400 [60.96] Latching Header With Hold Down Plating A Plating B Plating C 5-103904-1 5-103673-1 5-103672-1 5-103904-2 5-103673-2 5-103672-2 5-103904-3 5-103673-3 5-103672-3 5-103904-4 5-103673-4 5-103672-4 5-103904-5 5-103673-5 5-103672-5 5-103904-6 5-103673-6 5-103672-6 5-103904-7 5-103673-7 5-103672-7 5-103904-8 5-103673-8 5-103672-8 5-103904-9 5-103673-9 5-103672-9 6-103904-0 6-103673-0 6-103672-0 6-103904-1 6-103673-1 6-103672-1 6-103904-2 6-103673-2 6-103672-2 6-103904-3 6-103673-3 6-103672-3 6-103904-4 6-103673-4 6-103672-4 6-103904-5 6-103673-5 6-103672-5 6-103904-6 6-103673-6 6-103672-6 6-103904-7 6-103673-7 6-103672-7 6-103904-8 6-103673-8 6-103672-8 6-103904-9 6-103673-9 6-103672-9 7-103904-0 7-103673-0 7-103672-0 7-103904-1 7-103673-1 7-103672-1 7-103904-2 7-103673-2 7-103672-2 7-103904-3 7-103673-3 7-103672-3 7-103904-4 7-103673-4 7-103672-4 Latching Header Without Hold Down Plating A Plating B Plating C 5-104935-5 5-103635-1 5-103634-1 5-104935-3 5-103635-2 5-103634-2 5-104935-1 5-103635-3 5-103634-3 5-104935-6 5-103635-4 5-103634-4 5-104935-7 5-103635-5 5-103634-5 5-104935-8 5-103635-6 5-103634-6 5-104935-2 5-103635-7 5-103634-7 5-104935-9 5-103635-8 5-103634-8 6-104935-0 5-103635-9 5-103634-9 6-104935-1 6-103635-0 6-103634-0 5-104935-4 6-103635-1 6-103634-1 6-104935-2 6-103635-2 6-103634-2 6-104935-3 6-103635-3 6-103634-3 6-104935-4 6-103635-4 6-103634-4 6-104935-5 6-103635-5 6-103634-5 6-104935-6 6-103635-6 6-103634-6 6-104935-7 6-103635-7 6-103634-7 6-104935-8 6-103635-8 6-103634-8 6-104935-9 6-103635-9 6-103634-9 7-104935-0 7-103635-0 7-103634-0 7-104935-1 7-103635-1 7-103634-1 7-104935-2 7-103635-2 7-103634-2 7-104935-3 7-103635-3 7-103634-3 7-104935-4 7-103635-4 7-103634-4 MTE Headers Notes: 1. Selectively loaded headers are available, consult Tyco Electronics. 2. Use Keying Tool No. 91417-1 to remove post for keying. 5 Note: All part numbers are RoHS compliant. 247 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline .025 [0.64] Square Straight Post (With Swaged Tails and PC Board Orientation) .535 [13.59] Swaged Retention Tail (See Note) Position No. 1 Indicator Housing — Black thermoplastic, 94V-0 rated Posts — Brass, plated .000100 [0.00254] tin over .000050 [0.00127] nickel on entire post .120 [3.05] MTE Headers .070 [1.78] X .100 [2.54] .050 [1.27] Dia. .260 [6.60] .200 [5.08] .060 [1.52] Mateable AMPMODU MTE Products — Receptacle Assemblies (Polarized/Latching) — pages 230, 231 Receptacle Assemblies with Guide Ribs (installed in Single-Row Coupling Shroud) — pages 232, 233, 235, 240 X .050 [1.27] .100 [2.54] Typ. C .100* Typ. [2.54] Technical Documents — .230 [5.84] .065±.003 Dia. [1.65±0.08] .130 [3.30] .135±.003 [3.43±0.08] .040±.003 Dia. Typ. [1.02±0.08] (for Retention Tails) pages 277, 278 5 B C Related Product Data Product Specification 108-25034 Application Specification 114-25026 A .060 [1.52] (2 Plc.) Material and Finish .075±.003 [1.91±0.08] .350 [8.89] Section X-X Recommended PC Board Hole Layout *±.003 [±0.08]; tolerances not to accumulate within one connector pattern. Note: Swaged retention tails are provided in a minimum of two locations per header. No. of Pos. 2 3 4 5 6 7 8 9 10 A .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] Dimensions B .220 [5.59] .320 [8.13] .420 [10.67] .520 [13.21] .620 [15.75] .720 [18.29] .820 [20.83] .920 [23.37] 1.020 [25.91] C .100 [2.54] .200 [5.08] .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] Latching Header 5-104450-1 5-104450-2 5-104450-3 5-104450-4 5-104450-5 5-104450-6 5-104450-7 5-104450-8 5-104450-9 Note: All part numbers are RoHS compliant. 248 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System MTE Headers, Through-hole, Surface Mount Compatible, Shrouded Polarized/Latching, Single-Row .100 [2.54] Centerline .025 [0.64] Square Straight Post (With Swaged Tails and PC Board Orientation) .535 [13.59] Swaged Retention Tail (See Note) Position No. 1 Indicator A B Material and Finish C Housing — Black thermoplastic, 94V-0 rated Posts — Brass, duplex plated .000015 [0.00038] gold on contact area, .000100 [0.00254] min tin on solder tail, with entire post underplated .000050 [0.00127] nickel .060 [1.52] .230 [5.84] .100 [2.54] .200 Ref. [5.08] (Contact Area) X .262 [6.65] .120 [3.05] .060 [1.52] .200 [5.08] .100 Typ. [2.54] .350 [8.89] .130 [3.30] X Related Product Data Section X-X .040±.002 Typ. [1.02±0.05] .100* Typ. [2.54] .065±.003 [1.65±0.08] .180±.002 [4.57±0.05] .135±.003 [3.43±0.08] .040±.003 Dia. Typ. [1.02±0.08] Plated-Thru Hole Technical Documents — .020±.002 [0.51±0.05] Typ. Header Profile (Shown for orientation purposes only) pages 277, 278 Product Specification 108-25034 Application Specification 114-25026 MTE Headers Mateable AMPMODU MTE Products — Receptacle Assemblies with Guide Ribs (installed in Single-Row Coupling Shroud) — pages 232, 233, 235, 240 Receptacle Assemblies (Polarized Latching) — pages 230, 231 5 .075±.003 [1.90±0.08] Recommended PC Board Hole Layout (Stencil Thickness = .010 [0.25]) *±.003 [±0.08] tolerance not to accumulate within one connector pattern No. of Pos. 2 3 4 5 6 7 8 9 10 11 12 A .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.300 [33.02] Dimensions B .220 [5.59] .320 [8.13] .420 [10.67] .520 [13.21] .620 [15.75] .720 [18.29] .820 [20.83] .920 [23.37] 1.020 [25.91] 1.120 [28.45] 1.220 [30.99] C .100 [2.54] .200 [5.08] .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] Polarized/Latching Header, High-Temp 5-104809-1 5-104809-2 5-104809-3 5-104809-4 5-104809-5 5-104809-6 5-104809-7 5-104809-8 5-104809-9 6-104809-0 6-104809-1 Note: All part numbers are RoHS compliant. 249 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System MTE Headers, Polarized/Latching, Through-Hole, Surface Mount Compatible, Single-Row, .100 [2.54] Centerline .025 [0.64] Square Right-Angle Post (With Holddown) .535 [13.59] Position No. 1 Indicator Material and Finish Housing — Black thermoplastic, 94V-0 rated Posts — Brass, duplex plated .000015 [0.00038] gold on contact area, .000100 [0.00254] min. tin on solder tail, with entire post underplated .000050 [0.00127] nickel .230 [5.84] A .060 [1.52] (2 Plc.) B C .100 Typ. [2.54] .120 [3.05] .100 [2.54] X .262 [6.65] .145 [3.68] X .350 [8.89] .145 [3.68] Section X-X .093+.003 -.000 Dia. .093 2.36+0.08 -.000 (2 Plc.) .093 Mateable AMPMODU MTE Products — Receptacle Assemblies (Polarized/ Latching) — pages 230, 231 Receptacle Assemblies with Guide Ribs (installed in Single-Row Coupling Shroud) — pages 232, 233, 235, 240 MTE Headers .200 [5.08] .180 [4.57] .060 [1.52] Related Product Data [ .340±.003 [8.64±0.08] .035±.003 Dia. Typ. [0.89±0.08] Plated-Thru Hole Technical Documents — 5 .200 Ref. [5.08] (Contact Area) pages 277, 278 Product Specification 108-25034 Application Specification 114-25026 ] .090±.002 [2.29±0.05] .100* Typ. [2.54] .070±.002 Typ. [1.78±0.51] C .058±.003 [1.47±0.08] (2 Plc.) Recommended PC Board (Stencil Thickness = .010 [0.25]) *±.003 [±0.08]; tolerance is not to accumulate within one connector pattern. No. of Pos. A Dimensions B C 2 3 4 5 6 7 8 9 10 11 12 13 .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.300 [33.02] 1.400 [35.56] .220 [5.59] .320 [8.13] .420 [10.67] .520 [13.21] .620 [15.75] .720 [18.29] .820 [20.83] .920 [23.37] 1.020 [25.91] 1.120 [28.44] 1.220 [30.99] 1.320 [33.53] .100 [2.54] .200 [5.08] .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] Right-Angle Header with Hold Down 5-104361-1 5-104361-2 5-104361-3 5-104361-4 5-104361-5 5-104361-6 5-104361-7 5-104361-8 5-104361-9 6-104361-0 6-104361-1 6-104361-2 No. of Pos. A Dimensions B C 14 15 16 17 18 19 20 21 22 23 24 25 1.500 [38.10] 1.600 [40.64] 1.700 [43.18] 1.800 [45.72] 1.900 [48.26] 2.000 [50.80] 2.100 [53.34] 2.200 [55.88] 2.300 [58.42] 2.400 [60.96] 2.500 [63.50] 2.600 [66.04] 1.420 [36.07] 1.520 [38.61] 1.620 [41.15] 1.720 [43.69] 1.820 [46.23] 1.920 [48.77] 2.020 [51.31] 2.120 [53.85] 2.220 [56.39] 2.320 [58.93] 2.420 [61.47] 2.520 [64.01] 1.300 [33.02] 1.400 [35.56] 1.500 [38.10] 1.600 [40.64] 1.700 [43.18] 1.800 [45.72] 1.900 [48.26] 2.000 [50.80] 2.100 [53.34] 2.200 [55.88] 2.300 [58.42] 2.400 [60.96] Right-Angle Header with Hold Down 6-104361-3 6-104361-4 6-104361-5 6-104361-6 6-104361-7 6-104361-8 6-104361-9 7-104361-0 7-104361-1 7-104361-2 7-104361-3 7-104361-4 Note: All part numbers are RoHS compliant. 250 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System MTE Headers, Right-Angle, Polarized/Latching, Surface Mount E .025 [0.64] Typ. .120 [3.05] Ø.085±.002 [2.16±0.05] .065 Min Pad on [1.65] Underside 2 Plc .140 [3.56] .535 [13.59] Material and Finish Housing — Black thermoplastic, 94V-0 rated Posts — Brass, plated as follows: Plating A — Duplex plated .000030 [.00076] gold on contact area, .000100 [.00254] min. tin on solder area, with entire post underplated .000050 [.00127] nickel. Plating B — Duplex plated .000015 [.00038] gold on contact area, .000100 [.00254] min. tin on solder area, with entire post underplated .000050 [.00127] nickel. Plating C — .000100 [.00254] tin over .000050 [.00127] nickel on entire post .133 [3.38] .070±.002 Typ [1.78±0.05] Position No. 1 Indicator A .120 [3.05] .200 [5.08] D .002 [0.05] (Tangent of heel) Product Specification 108-25034 Application Specification 114-25026 Note: All part numbers are RoHS compliant. .076 [1.93] .288 [7.32] Ref ] + 0.05 - 0.07 .038 2 Plc [0.97] .350 [8.89] .200 [5.08] Ref Contact Area K K [1.19 .457 [11.61] Ref See L Section K-K MTE Headers Technical Documents — C B .262 [6.65] .047 -.003 (Plated thru hole) Recommended PC Board Layout (Refer to MTE Application Spec. 114-25026 for Stencil Aperture Layout Using .006 [0.152] or .008 [0.203] Stencil Thickness) pages 277, 278 + .002 Ø Recommended PC Board Layout Mateable AMPMODU MTE Products — Receptacle Assemblies (Polarized/ Latching) — pages 230, 231 Receptacle Assemblies with Guide Ribs (installed in Single-Row Coupling Shroud) — pages 232, 233, 235, 240 .190±.001 [4.83±0.02] 2 Plc .265 [6.73] .165±.003 [4.19±0.07] C Related Product Data .136±.001 [3.45±0.02] 2 Plc .054/.039 [1.37/0.99] View L 5 .140±.002 [3.56±0.05] No. of Pos. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 A .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.300 [33.02] 1.400 [35.56] 1.500 [38.10] 1.600 [40.64] 1.700 [43.18] 1.800 [45.72] 1.900 [48.26] 2.000 [50.80] 2.100 [53.34] 2.200 [55.88] 2.300 [58.42] 2.400 [60.96] 2.500 [63.50] 2.600 [66.04] 2.700 [68.58] B .220 [5.59] .320 [8.13] .420 [10.67] .520 [13.21] .620 [15.75] .720 [18.29] .820 [20.83] .920 [23.37] 1.020 [25.91] 1.120 [28.45] 1.220 [30.99] 1.320 [33.53] 1.420 [36.07] 1.520 [38.61] 1.620 [41.15] 1.720 [43.69] 1.820 [46.23] 1.920 [48.77] 2.020 [51.31] 2.120 [53.85] 2.220 [56.39] 2.320 [58.93] 2.420 [61.47] 2.520 [64.01] Dimensions C .100 [2.54] .200 [5.08] .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.300 [33.02] 1.400 [35.56] 1.500 [38.10] 1.600 [40.64] 1.700 [43.18] 1.800 [45.72] 1.900 [48.26] 2.000 [50.80] 2.100 [53.34] 2.200 [55.88] 2.300 [58.42] 2.400 [60.96] D .140 [3.56] .190 [4.83] .240 [6.10] .290 [7.37] .340 [8.64] .390 [9.91] .440 [11.18] .490 [12.45] .540 [13.72] .590 [14.99] .640 [16.26] .690 [17.53] .740 [18.80] .790 [20.07] .840 [21.34] .890 [22.61] .940 [23.88] .990 [25.15] 1.040 [26.42] 1.090 [27.69] 1.140 [28.96] 1.190 [30.23] 1.240 [31.50] 1.290 [32.77] E .290 [7.37] .390 [9.91] .490 [12.45] .590 [14.99] .690 [17.53] .790 [20.07] .890 [22.61] .990 [25.15] 1.090 [27.69] 1.190 [30.23] 1.290 [32.77] 1.390 [35.31] 1.490 [37.85] 1.590 [40.39] 1.690 [42.93] 1.790 [45.47] 1.890 [48.01] 1.990 [50.55] 2.090 [53.09] 2.190 [55.63] 2.290 [58.17] 2.390 [60.71] 2.490 [63.25] 2.590 [65.79] Right-Angle Latching SMT Headers Plating A Plating B Plating C 5-147323-1 5-147278-1 5-147324-1 5-147323-2 5-147278-2 5-147324-2 5-147323-3 5-147278-3 5-147324-3 5-147323-4 5-147278-4 5-147324-4 5-147323-5 5-147278-5 5-147324-5 5-147323-6 5-147278-6 5-147324-6 5-147323-7 5-147278-7 5-147324-7 5-147323-8 5-147278-8 5-147324-8 5-147323-9 5-147278-9 5-147324-9 6-147323-0 6-147278-0 6-147324-0 6-147323-1 6-147278-1 6-147324-1 6-147323-2 6-147278-2 6-147324-2 6-147323-3 6-147278-3 6-147324-3 6-147323-4 6-147278-4 6-147324-4 6-147323-5 6-147278-5 6-147324-5 6-147323-6 6-147278-6 6-147324-6 6-147323-7 6-147278-7 6-147324-7 6-147323-8 6-147278-8 6-147324-8 6-147323-9 6-147278-9 6-147324-9 7-147323-0 7-147278-0 7-147324-0 7-147323-1 7-147278-1 7-147324-1 7-147323-2 7-147278-2 7-147324-2 7-147323-3 7-147278-3 7-147324-3 7-147323-4 7-147278-4 7-147324-4 251 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System MTE Headers, Vertical, Polarized/Latching, Surface Mount E .075 [1.90] .025 Typ. [0.62] .535 [13.59] .313 [7.62] Material and Finish MTE Headers Housing — Black thermoplastic, 94V-0 rated Posts — Brass, plated as follows: Plating A — Duplex plated .000030 [.00076] gold on contact area, .000100 [.00254] min. tin on solder area, with entire post underplated .000050 [.00127] nickel. Plating B — Duplex plated .000015 [.00038] gold on contact area, .000100 [.00254] min. tin on solder area, with entire post underplated .000050 [.00127] nickel. Plating C — .000100 [.00254] tin over .000050 [.00127] nickel on entire post .063 Position No. 1 Indicator [1.52] A .230 [5.84] B .025 Typ. [0.64] K .100 [2.54] .120 [3.05] K Pick and Place Cap .200 [5.08] Section K-K .100 Typ. [2.54] .055±.003 [1.40±0.08] + .002 Ø .052 – .003 [1.32 .088±.003 [2.25±0.08] ] + 0.05 – 0.07 Plated Thru-Hole Recommended PC Board Layout Ø .070±.002 [1.78±0.05] (Refer to MTE Application Spec. 114-25026 for Stencil Aperature Layout using .006 [0.152] or .008 [0.203] stencil thickness 5 .113 [2.88] C .227 [5.76] 0.06 [1.53] D Position No. 1 Recommended PC Board Layout Related Product Data Mateable AMPMODU MTE Products — Receptacle Assemblies (Polarized/ Latching) — pages 230, 231 Receptacle Assemblies with Guide Ribs (installed in Single-Row Coupling Shroud) — pages 232, 233, 235, 240 Technical Documents — pages 277, 278 Product Specification 108-25034 Application Specification 114-25026 Note: All part numbers are RoHS compliant. Dimensions No. of Pos. A 2 .300[7.62] .220[5.59] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 .400[10.16] .500[12.70] .600[15.24] .700[17.78] .800[20.32] .900[22.86] 1.000[25.40] 1.100[27.94] 1.200[30.48] 1.300[33.02] 1.400[35.56] 1.500[38.10] 1.600[40.64] 1.700[43.18] 1.800[45.72] 1.900[48.26] 2.000[50.80] 2.100[53.34] 2.200[55.88] 2.300[58.42] 2.400[60.96] 2.500[63.50] 2.600[66.04] .320[8.13] .420[10.67] .520[13.21] .620[15.75] .720[18.29] .820[20.83] .920[23.37] 1.020[25.91] 1.120[28.45] 1.220[30.99] 1.320[33.53] 1.420[36.07] 1.520[38.61] 1.620[41.15] 1.720[43.69] 1.820[46.23] 1.920[48.77] 2.020[51.31] 2.120[53.85] 2.220[56.39] 2.320[58.93] 2.420[61.47] 2.520[64.01] B C Vertical SMT Headers D E Plating A .100[2.54] .220[5.60] Plating B Plating C .110[2.80] 5-1375583-1 5-1375582-1 5-1375549-1 .200[5.08] .300[7.62] .400[10.16] .500[12.70] .600[15.24] .700[17.78] .800[20.32] .900[22.86] 1.000[25.40] 1.100[27.94] 1.200[30.48] 1.300[33.02] 1.400[35.56] 1.500[38.10] 1.600[40.64] 1.700[43.18] 1.800[45.72] 1.900[48.26] 2.000[50.80] 2.100[53.34] 2.200[55.88] 2.300[58.42] 2.400[60.96] .320[8.14] .420[10.68] .520[13.22] .620[15.76] .720[18.30] .820[20.84] .920[23.38] 1.020[25.92] 1.120[28.46] 1.220[31.00] 1.320[33.54] 1.420[36.08] 1.520[38.62] 1.620[41.16] 1.720[43.70] 1.820[46.24] 1.920[48.78] 2.020[51.32] 2.120[53.86] 2.220[56.40] 2.320[58.94] 2.420[61.48] 2.520[64.02] .160[4.07] .210[5.34] .260[6.61] .310[7.88] .360[9.15] .410[10.42] .460[11.69] .510[12.96] .560[14.23] .610[15.50] .660[16.77] .710[18.04] .760[19.31] .810[20.58] .860[21.85] .910[23.12] .960[24.39] 1.010[25.66] 1.060[26.93] 1.110[28.20] 1.160[29.47] 1.210[30.74] 1.260[32.01] 5-1375583-2 5-1375583-3 5-1375583-4 5-1375583-5 5-1375583-6 5-1375583-7 5-1375583-8 5-1375583-9 6-1375583-0 6-1375583-1 6-1375583-2 6-1375583-3 6-1375583-4 6-1375583-5 6-1375583-6 6-1375583-7 6-1375583-8 6-1375583-9 7-1375583-0 7-1375583-1 7-1375583-2 7-1375583-3 7-1375583-4 5-1375582-2 5-1375582-3 5-1375582-4 5-1375582-5 5-1375582-6 5-1375582-7 5-1375582-8 5-1375582-9 6-1375582-0 6-1375582-1 6-1375582-2 6-1375582-3 6-1375582-4 6-1375582-5 6-1375582-6 6-1375582-7 6-1375582-8 6-1375582-9 7-1375582-0 7-1375582-1 7-1375582-2 7-1375582-3 7-1375582-4 5-1375549-2 5-1375549-3 5-1375549-4 5-1375549-5 5-1375549-6 5-1375549-7 5-1375549-8 5-1375549-9 6-1375549-0 6-1375549-1 6-1375549-2 6-1375549-3 6-1375549-4 6-1375549-5 6-1375549-6 6-1375549-7 6-1375549-8 6-1375549-9 7-1375549-0 7-1375549-1 7-1375549-2 7-1375549-3 7-1375549-4 252 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Interchangeable Contacts, Wire Crimp (Snap-In) Material and Finish Short Point Receptacles .068 [1.73] Copper alloy C7025, plated as follows: Plating A — Duplex plated .000030 [0.00076] min. gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] min. nickel Plating B — Duplex plated .000015 [0.00038] min. gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] min. nickel Plating C — .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel on entire contact .060 [1.52] .460 [11.68] C Keying Plug Part No. 104072-1 Ten plugs are supplied per strip. Order quantity reflects the number of strips required. C MTE Headers .012 [0.30] Gap Section C - C Extraction/Lance Reset Tool No. 843477-1 Related Product Data Performance Characteristics — page 221 Housings used in — Short Point—pages 223, 224 AMPMODU MTE Unloaded Housings — pages 228-233 Application Tooling— pages 270-272 Wire Size Range AWG [mm2] 5 Technical Documents — Ins. Dia. Range 32-28 0.03-0.08 .025-.060 0.64-1.52 26-22 0.13-0.3 .025-.060 0.64-1.52 24-20 0.2-0.5 .025-.060 0.64-1.52 pages 277, 278 Product Specification 108-1472, 108-1472-1 Application Specification 114-25038 Finish Plating A Plating B Plating C Plating A Plating B Plating C Plating A Plating B Plating C Contact Part No. (Standard Pressure) Strip Form Loose Piece 1-104481-1 1-104481-0 5-104481-2 1-104480-3 1-104480-2 1-104480-7 1-104479-0 104479-9 104479-8 1-104481-3 1-104481-2 5-104481-6 1-104480-6 1-104480-5 1-104480-4 1-104479-3 1-104479-2 1-104479-1 Heavy Duty Miniature Applicator for AMP-O-LECTRIC Machine* Applicator for AMP-O-MATIC Stripper/Crimper Machine Hand Tool Nos. 567296-2 466980-1 91518-1 567297-2 466981-1 91518-1 567298-2 466982-1 91551-1 *For use with Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the Model “G” machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines. Note: These wire crimp contacts can be intermixed with insulation displacement crimp contacts. Note: All part numbers are RoHS compliant. 253 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Interchangeable Contacts, Wire Crimp (Snap-In) (Continued) Material and Finish Pins Phosphor bronze, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000030 [0.00076] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel Plating B — Duplex plated .000015 [0.00038] gold on contact area, .000030 [0.00076] min. tin on solder area, with entire contact underplated .000050 [0.00127] nickel Plating C — .000100 [0.00254] tin over .000050 [0.00127] nickel on entire contact .025 [0.64] .025 [0.64] MTE Contacts Extraction/Lance Reset Tool No. 843477-1 .810 [20.57] Related Product Data Performance Characteristics — page 221 AMPMODU MTE Unloaded Housings — pages 228-233 Application Tooling — pages 270-272 5 Technical Documents — pages 277, 278 Product Specification 108-25034 Application Specification 114-25026 Wire Size Range AWG [mm2] Ins. Dia. Range 32-28 0.03-0.08 .025-.054 0.64-1.37 26-22 0.14-0.32 .036-.054 0.91-1.37 Finish Plating A Plating B Plating C Plating A Plating B Plating C Contact Part No. (Standard Pressure) Strip Loose Form Piece 5-104506-6 5-104506-7 5-104506-4 5-104506-5 5-104506-2 5-104506-3 5-104505-6 5-104505-7 5-104505-4 5-104505-5 5-104505-2 5-104505-3 Applicator for Heavy Duty Miniature Applicator AMP-O-MATIC Stripper/ for AMP-O-LECTRIC Crimper Machine* Machine Hand Tool Nos. — — 58342-2 567239-2 466983-1 91531-1 *For use with AMP-O-LECTRIC Model “K” machines. Call Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines. Note: These wire crimp contacts can be intermixed with insulation displacement crimp contacts. Note: All part numbers are RoHS compliant. 254 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208