Quick Reference Guide Mini-Universal MATE-N-LOK Connector System The Mini-Universal MATE-N-LOK Connector System offers wire-to-wire and wire-to-board connections with contacts on a 4.14 mm [.163] centerline and current ratings up to 9.5 Amps max. per line. Plug and receptacle housings allow wire-to-wire and wire-to-panel configurations and header assemblies offer wire-to-board connections in vertical and right angle configurations. Wire-to-wire, free-hanging or panel mount options are available in 1-15 position in-line, dual row or matrix configurations and wire-to-board systems in dual row and matrix configurations are available in 2-24 positions. Hermaphroditic housings are also available in 2-4 positions for free-hanging applications. Crimp, snap-in pin and receptacle contacts are used to terminate 30-16 [0.05-1.2 mm2] AWG wire with insulation diameters up to 3.20 mm. The Mini-Universal MATE-N-LOK Connector System also offers a splash-proof design allowing for use in areas where high humidity, intermittent liquid splashing or foam-in applications require a sealed connector for improved electrical performance. The sealed system is available in select 2-16 positions. FEATURES AND BENEFITS PRODUCT APPLICATIONS • Discrete wire interconnect available in 1-24 position wire-to-wire and wire-to-board pin and receptacle connector system • Household appliances • Contacts are on 4.14 mm centerline spacing • Contacts are available in strip form or loose piece • Pins and sockets can be accommodated in the same housing • Vertical and right angle pin headers • Splash-proof design for applications that require sealing • UL, CSA & VDE approved te.com/products/miniuniversalmatenlok • Indoor and outdoor lighting • Medical equipment • Security systems • Industrial controls • HVAC system controls • Storage and networking systems TE Connectivity Mini-Universal MATE-N-LOK Connector System Contacts Wire Size Range AWG Ins. Dia. Range 30-26 [.05-.12] .035-.050 [.889-1.27] 30-26 [.05-.12] .035-.050 [.889-1.27] 26-22 [.12-.3] .047-.069 [1.19-1.75] 26-22 [.12-.3] .047-.069 [1.19-1.75] 22-18 [.3-.8] or 22 x (2) [.3] .059-.094 [1.50-2.39] or 0.67 x (2) [3.38] 22-18 [.3-.8] or 22 x (2) [.3] .059-.094 [1.50-2.39] or 0.67 x (2) [3.38] 20-16 [.5-.12] or 20 x (2) [.5] .079-.126 [2.01-3.20] or .075 x (2) [1.91] 20-16 [.5-.12] or 20 x (2) [.5] .079-.126 [2.01-3.20] or .075 x (2) [1.91] 22-26 .050-.069 [1.27-1.75] 22-26 .050-.069 [1.27-1.75] 18-22 .050-.083 [1.27-2.11] 18-22 .050-.083 [1.27-2.11] 16 .050-.083 [1.27-2.11] 16 .050-.083 [1.27-2.11] Plating Pre-Tin Pin Gold x x x x x x x x Socket G Press Hand Tool Part No. 567418-1 567418-2 567418-3 90717-2 1-794058-0 567418-1 567418-2 567418-3 90717-2 770702-1* 770986-1* 567066-1 567066-2 567418-3 91529-1 1-770985-0* 1-770902-0* 1-770986-0* 567066-1 567066-2 567418-3 91529-1 770903-1* 770987-1* 770904-1* 770988-1* 567067-1 567067-2 567067-3 91522-1 1-770903-0* 1-770987-0* 1-770904-0* 1-770988-0* 567067-1 567067-2 567067-3 91522-1 794406-1 171638-1 794407-1 171639-1 680582-1 680582-2 680582-3 91536-1 680582-1 680582-2 680582-3 91536-1 Loose Piece Strip From Loose Piece 770835-1 794059-1 770834-1 794058-1 1-770835-0 1-794059-0 1-770834-0 770901-1* 770985-1* 1-770901-0* 1-794406-0 x x x x x Semiautomatic K Press Strip From 1-794407-0 770901-1 770985-1 770902-1 770986-1 1-770901-0 1-770985-0 1-770902-0 1-770986-0 794406-1 794831-1 794406-3 794831-3 1586537-1 1586538-1 — 1586538-3 x Automatic *Can be used in conjunction with individual wire seal- part no. 794758-1 Contact Extraction Tool Part No. 189727-1 Contact Insertion Tool Part No. 91002-1 Pin The Mini-Universal MATE-N-LOK contacts are brass with pre-tin or gold plating. See catalog 82181 for additional available options. The contacts are fully protected in the housings. The pins and sockets can be accommodated in the same housing. Socket Cap Housings No. of Circuits Hermaphroditic Housings UL94V-0 Panel Mount 1 Free-Hanging UL94V-2 Panel Mount 172156-1 Configurations Free-Hanging Single Row 172327-1 x 2 172157-1 172233-1 172328-1 172343-1 x 3 172158-1 172234-1 172329-1 172344-1 x Dual Row Matrix 4 172159-1 172330-1 x 6 172160-1 172331-1 x 9 172161-1 172332-1 x 12 172162-1 172333-1 x No. of Circuits UL94V-0 Nylon, White Color UL94V-2, Natural Color 2 173956-1 172807-1 3 173957-1 172808-1 4 173958-1 172809-1 Note: Housing mates to itself; 2 required per wire-to-wire connection Cap Housing te.com/products/miniuniversalmatenlok TE Connectivity Mini-Universal MATE-N-LOK Connector System Vertical Pin Headers No. of Circuits Vertical In Line Dual Row with Drain holes w/out Drain holes 2 1-770166-0 1-770872-0 x 2 1-770166-1 1-770872-1 x 3 1-770170-0 1-770873-0 x 3 1-770170-1 1-770873-1 x 4 1-770174-0 1-770874-0 x 4 1-770174-1 1-770874-1 x 6 1-770178-0 1-770875-0 x 6 1-770178-1 1-770875-1 x 8 1-794065-0 1-794073-0 x 8 1-794065-1 1-794073-1 x 9 1-770182-0 1-770976-0 Matrix Tin Gold x x x x x x x x x x x 9 1-770182-1 1-770976-1 10 1-770743-0 1-770858-0 x 10 1-770743-1 1-770858-1 x 12 1-794066-0 1-770621-0 x 12 1-794066-1 1-770621-1 x 12 1-770186-0 1-794040-0 12 1-770186-1 1-794040-1 14 1-794067-0 1-794074-0 x 14 1-794067-1 1-794074-1 x 15 1-770190-0 1-770859-0 15 1-770190-1 1-770859-1 16 1-794068-0 1-794075-0 x 16 1-794068-1 1-794075-1 x 18 1-794069-0 1-794076-0 x 18 1-794069-1 1-794076-1 x 20 1-794070-0 1-794077-0 x 20 1-794070-1 1-794077-1 x 22 1-794071-0 1-794078-0 x 22 1-794071-1 1-794078-1 x 24 1-794072-0 1-794079-0 x 24 1-794072-1 1-794079-1 x x x x x x x x x x x x x x x x x x x x x x x x x x x x Right Angle Headers No. of Circuits Part No. 1 1-794374-0 1 1-794374-1 In Line Dual Row Gold Tin x x 2 1-770966-0 x 2 1-770966-1 x 3 1-770967-0 x 3 1-770967-1 x x x x x 4 1-770968-0 x 4 1-770968-1 x 6 1-770969-0 x 6 1-770969-1 x 8 1-770970-0 x 8 1-770970-1 x 10 1-770971-0 x 10 1-770971-1 x 12 1-770972-0 x 12 1-770972-1 x 14 1-770973-0 x 14 1-770973-1 x 16 1-770974-0 x 16 1-770974-1 x 18 1-794105-0 x 18 1-794105-1 x 20 1-794106-0 x 20 1-794106-1 x 22 1-794107-0 x 22 1-794107-1 x 24 1-794108-0 x 24 1-794108-1 x te.com/products/miniuniversalmatenlok x x x x Vertical Pin Header x x x x x x x x x x x x x x x x x x Right Angle Pin Header TE Connectivity Mini-Universal MATE-N-LOK Connector System Vertical PC Board Blindmate Pin Headers No. of Circuits Vertical PC Board Pin Header Part No. w/ Drain Holes Dual Row 4 1-794325-0 x 4 1-794325-1 x 6 1-794326-0 x 6 1-794326-1 x 8 1-794327-0 x x 8 1-794327-1 9 1-794432-0 Matrix Tin Gold x x x x x x x 9 1-794432-1 10 1-794328-0 x 10 1-794328-1 x 12 1-794329-0 x 12 1-794329-1 x 15 1-794330-0 x 15 1-794330-1 x x x x x x x x x x Gang Seals No. of Positions Interface Seals Gang Wire Seal Plug for Sealing Cap for Sealing Vertical Headers for Sealing* Right Angle Headers for Sealing* 2 794772-2 1586359-2 794894-1 794896-1 1-770872-x 1-770966-x 4 794772-4 1586359-4 794805-1 794939-1 1-770874-x 1-770968-x 6 794772-6 1586359-6 794895-1 794940-1 1-770875-x 1-770969-x 8 794772-8 1586359-8 794821-1 794941-1 1-794073-x 1-770970-x 794942-1 10 1-794772-0 1-1586359-0 794781-1 16 1-1586362-6 1-1586359-6 794824-1 1-770858-x 1-770971-x 1-794075-x 1-770974-x *Note: -0 for tin finish, -1 for gold. See Mini-Universal MATE-N-LOK section in catalog 82181 for details. Single Wire Seal Gang Seal Wire Seal Configuration te.com/products/miniuniversalmatenlok Single & Gang Wire Seals with Interfacial Seal Single Wire Seal TE Connectivity Mini-Universal MATE-N-LOK Connector System Plug Housings No. of Circuits UL94V-0 UL94V-2 Single Row 1 172164-1 172335-1 x 2 172165-1 172336-1 x 3 172166-1 172337-1 x Dual Row 4 172167-1 172338-1 x 6 172168-1 172339-1 x 8 770579-1 — x 9 172169-1 172340-1 10 770580-1 — Matrix x x 12 172170-1 172341-1 12 770581-1 — x x 14 770582-1 — x 15 172171-1 172342-1 16 770583-1 — x 18 770584-1 — x 20 770585-1 — x 22 770586-1 — x 24 770587-1 — x x Strain Reliefs - Plug or Cap Housings No. of Circuits Wire Bundle Dia. Range UL94V-0 Part No. Use with: Dual Row 6 .135-.220 4.19-5.59 794423-1 172168-1, 172160-1, 172339-1, 172331-1 x 8 .180-.245 4.57-6.22 794370-1 770979-1 x Matrix 9 Plug 316454-1 172169-1, 172340-1 x 9 Cap 316455-1 172161-1, 171232-1 x Plug or Cap housing Close and Lock Strain Relief around housing. Insert Locking Tab to firmly secure wires. Strain Relief Locking Tab Break off plastic connecting Locking Tab to Strain Relief Step 1 Step 2 Connector Kits Kit Part Number Description 1-2110832-0 Mini-Universal MATE-N-LOK Panel Mount Plug and Receptacle Kit 1-2110832-1 Mini-Universal MATE-N-LOK Vertical Header and Plug Connector Kit 1-2110832-2 Mini-Universal MATE-N-LOK Right Angle Header and Plug Connector Kit 1-2110832-3 Mini-Universal MATE-N-LOK Plug and Receptacle Connector Kit 1-2110832-5 Mini-Universal MATE-N-LOK Deluxe Header, Plug, Receptacle and Sealed Components Kit 1-2110832-7 Mini-Universal MATE-N-LOK and Universal MATE-N-LOK Deluxe Sealed Plug, Receptacle and Components Kit 1-2110832-8 Mini-Universal MATE-N-LOK, Universal MATE-N-LOK and Universal MATE-N-LOK II Deluxe Plug and Receptacle Connector Kit te.com/products/miniuniversalmatenlok Questions that will help you better select the product that you need: What are the current and voltage requirements for your application? The Mini-Universal MATE-N-LOK connector system has a maximum current rating of 9.5 Amps per line and is rated for 600 Volts AC/DC. What are the wire type and size requirements? The Mini-Universal MATE-N-LOK connector system contacts are approved for use with 4 different wire ranges from 30 AWG [0.05] to 16 AWG [1.20] wire with a maximum insulation diameter of .126 [3.20]. What are the number of positions? The Mini-Universal MATE-N-LOK connector system is available in wire-to-wire, free-hanging or panel mount options in 1-15 position in-line, dual row or matrix configurations and wire-to-board is available in 2-24 positions dual row and matrix configurations. The hermaphroditic housings are available in 2-4 positions for freehanging applications and the sealed system is available in select 2-16 positions. What are the operating temperature requirements? The Mini-Universal MATE-N-LOK connector system has a maximum operating temperature of 105°C. For more information regarding operating temperatures refer to Product Specification 108-1542. What is the benefit of using the hermaphroditic housings? The Mini-Universal MATE-N-LOK connector system offers a special hermaphroditic housing design where 2 of the same housings in the same position size mate to one another. The benefit of this design simply reduces the amount of part numbers and inventory for the user. What is the benefit of using the Mini-Universal MATE-N-LOK Sealed Connector System? The Mini-Universal MATE-N-LOK Sealed Connector System offers a splash-proof design for use in areas where high humidity, intermittent liquid splashing or foam-in applications require a sealed connector for improved electrical performance. The sealed system is available in select 2-16 positions and requires either individual or ganged wire seals and an interface seal in conjunction with the plug and cap housings uniquely designed to accommodate these seals. The sealed plug housings with wire and interface seal can also be mated to the standard Mini-Universal MATE-N-LOK headers without drain holes for a sealed wire to board application. FOR MORE INFORMATION TE Technical Support USA: Canada: Mexico Latin/S. America: Germany: UK: France: Netherlands: China: Center +1 (800) 522-6752 +1 (905) 475-6222 +52 (0) 55-1106-0800 +54 (0) 11-4733-2200 +49 (0) 6251-133-1999 +44 (0) 800-267666 +33 (0) 1-3420-8686 +31 (0) 73-6246-999 +86 (0) 400-820-6015 Part numbers in this brochure are RoHS Compliant*, unless marked otherwise. *as defined www.te.com/leadfree te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. 1-1773458-0 CIS LUG FP 3M 09/2011 MATE-N-LOK, TE Connectivity and the TE connectivity (logo) are trademarks. Other logos, product and company names mentioned herein may be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this brochure are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.