Industrial Ethernet Connectors
XS5@-T / XS6@-T
Support for Ethernet/IP, EtherCAT, and
Other Popular Networks Based on Ethernet
• Combines tough RJ45 Connectors for use outside of panels and
Environment-resistance Connectors with IP67 protection (M12).
• M12 Smartclick mates with any threaded M12 socket and
provides 'twist and click' connection with XS5P-T panel socket.
• M12 Smartclick connectors are shielded to protect against EMI.
• Separate RJ45 assembly connectors are available for easy wiring
on site.
• Uses AWG22 Cat5E cables that are suitable for wiring outside of
panels.
TM
■ Specifications
Type
Cable with Connector Cable with Connectors
Cable with Connectors on Cable with Connectors on
on One End (M12)
on Both Ends (M12/M12) Both Ends (M12/RJ45)
Both Ends (RJ45/RJ45)
Item / Model
XS5H-T421-@M0-K
Rated current
3A
Rated voltage
30 V
XS5W-T421-@M2-K
XS5W-T421-@MC-K
XS5W-T421-@MD-K
RJ45 Assembly
Connector
XS6G-T421-1
2.5 A
M12 Connector for
Panel Mounting
XS5P-T42@-5
3A
Contact resistance 20 mΩ max.
Insulation
resistance
500 MΩ min.
Withstand voltage 1,000 VAC for 60 s (leak current: 1 mA max.)
Ambient operating −25 to 70°C
temperature
−40 to 70°C
−25 to 70°C
Ambient storage
temperature
−25 to 70°C
−40 to 70°C
−25 to 70°C
Degree of
protection
M12: IEC IP67, RJ45: IEC IP20
■ Materials and Finish
Connector
Item
Cable
Model
M12
Contact Block
PBT plastic (UL94V-0),
light gray
Contacts Materials
Phosphor bronze
Finish
Nickel base, 0.4-μm
gold-plating
RJ45
PA plastic (UL94V-0),
black
Nickel base, 1.4-μm
gold-plating
Fixtures
Nickel-plated zinc alloy
—
Cover
PBT
—
O-ring
Rubber
—
Note:
TM
Specifications
UL CM PVC (double shielding) Cat. 5E
Cores and colors
AWG22 (0.26/7):
Yellow, orange, white, and blue
Outer Diameter
6.5 mm
Sheath color
Light blue
is a registered trademark of the OMRON Corporation.
Industrial Ethernet Connectors
XS5@-T / XS6@-T
1
4-Pin Connectors with Cable Attached
■ XS5H - Plug on One Cable End
XS5H-T421-@M0-K (1 x M12)
TM
Dimensions
(Unit: mm)
L (cable length)
44.7
2
1
3
14.9 dia.
4
M12
D - Coding
Ordering Information
Type
Cable length L (m)
Cable with Connector on One End
(M12)
0.5
1
2
3
5
10
15
Model
Straight
XS5H-T421-BM0-K
XS5H-T421-CM0-K
XS5H-T421-DM0-K
XS5H-T421-EM0-K
XS5H-T421-GM0-K
XS5H-T421-JM0-K
XS5H-T421-KM0-K
Note: Ask your OMRON representative about other specifications.
Model Number Legend
Use this model number legend to identify products from their model number.
When ordering, use a model number from the table in Ordering Information.
XS5H - T421 - @M@ -K
1
2 34 5
6 7 8
9
1. Type
H:
Connector connected to cable, M12 plug on one cable end
2. Signal type
T:
Ethernet
3. Connector Poles
4:
4 poles
4. Contact Plating
2:
0.4-μm gold plating - M12 connectors
5. Cable Connection Direction
1:
Straight
2
Industrial Ethernet Connectors
6. Cable Length
A:
0.3 m
G: 5 m
B:
0.5 m
J: 10 m
C:
1m
K: 15 m
D:
2m
E:
3m
7. Connections
M:
A Yellow, B White, C Orange, D Blue
(Numbers inside circles are terminal numbers)
8. Connectors on One End/Both Ends
0:
One M12 Plug
9. Cable Specifications
K:
UL CM PVC (double shielded) / Cat.5E
XS5@-T / XS6@-T
■ XS5W - Plugs on Both Cable Ends
XS5W-T421-@M2-K (2 x M12)
TM
Dimensions
(Unit: mm)
L (cable length)
44.7
2
1
3
44.7
14.9 dia.
14.9 dia.
4
M12
D - Coding
M12
Ordering Information
Type
Cable length L (m)
Cable with Connector on Both Ends
(M12 / M12)
0.5
1
2
3
5
10
15
Model
Straight
XS5W-T421-BM2-K
XS5W-T421-CM2-K
XS5W-T421-DM2-K
XS5W-T421-EM2-K
XS5W-T421-GM2-K
XS5W-T421-JM2-K
XS5W-T421-KM2-K
XS5W-T421-@MC-K (1x M12 and 1x RJ45)
TM
Dimensions
(Unit: mm)
L (cable length)
44.7
2
1
3
54.7
14.9 dia.
4
D - Coding
M12
RJ45
Ordering Information
Type
Cable length L (m)
Cable with Connector on Both Ends
(M12 / RJ45)
0.3
0.5
1
2
3
5
10
15
Model
Straight
XS5W-T421-AMC-K
XS5W-T421-BMC-K
XS5W-T421-CMC-K
XS5W-T421-DMC-K
XS5W-T421-EMC-K
XS5W-T421-GMC-K
XS5W-T421-JMC-K
XS5W-T421-KMC-K
Note: Ask your OMRON representative about other specifications.
Industrial Ethernet Connectors
XS5@-T / XS6@-T
3
XS5W-T421-@MD-K (2 x RJ45)
Dimensions
(Unit: mm)
L (cable length)
54.7
54.7
RJ45
RJ45
Ordering Information
Type
Cable length L (m)
Cable with Connector on Both Ends
(RJ45 / RJ45)
0.3
0.5
1
2
3
5
10
15
Model
Straight
XS5W-T421-AMD-K
XS5W-T421-BMD-K
XS5W-T421-CMD-K
XS5W-T421-DMD-K
XS5W-T421-EMD-K
XS5W-T421-GMD-K
XS5W-T421-JMD-K
XS5W-T421-KMD-K
Note: Ask your OMRON representative about other specifications.
Model Number Legend
Use this model number legend to identify products from their model number.
When ordering, use a model number from the table in Ordering Information.
XS5W - T421 - @M@ -K
1
2 34 5
6 7 8
9
1. Type
W:
Connector connected to cable, plugs on both cable ends
2. Signal type
T:
Ethernet
3. Connector Poles
4:
4 poles
4. Contact Plating
2:
0.4-μm gold plating - M12 connectors
1.4 μm gold plating - RJ45 connectors
5. Cable Connection Direction
1:
Straight
4
Industrial Ethernet Connectors
6. Cable Length
A:
0.3 m
G: 5 m
B:
0.5 m
J: 10 m
C:
1m
K: 15 m
D:
2m
E:
3m
7. Connections
M:
A Yellow, B White, C Orange, D Blue
(Numbers inside circles are terminal numbers)
8. Connectors on One End/Both Ends
2:
Two M12 Plugs
C:
One M12 Plug + One RJ45 Plug
D:
Two RJ45 Plugs
9. Cable Specifications
K:
UL CM PVC (double shielded) / Cat.5E
XS5@-T / XS6@-T
Assembly Connector - RJ45
■ XS6G - Plugs
XS6G-T421-1
Dimensions
(Unit: mm)
52.6
11.8
11.3
8.1
Contact 6
Contact 1
Applicable wires
6.1 to 6.9 dia.
Stranded wires: AWG22 to AWG24
Solid wires: AWG22 to AWG23
Contact 2
Contact 3
Ordering Information
Type
Cable length L (m)
RJ45 Assembly Connector
---
Model
Straight
XS6G-T421-1
4-Pin Panel-mount Connectors
■ XS5P - Sockets
XS5P-T42@-5 (Rear or Front locking M12 socket)
Dimensions
(Unit: mm)
Wiring
XS5P-T426-5 (Rear Locking)
M12
PG9
18
2.8
17
18
Orange
500
White
14.6 dia.
20
10±3
2.5
D - Coding
11.9
Panel Cutout Dimension
22.1
15.3 +0.1
0 dia.
XS5P-T427-5 (Front Locking)
M12
17
PG9
20
Panel thickness (t)
= 1 to 4
2.8
18
500
Orange
White
18
13.9 dia.
10±3
D - Coding
Color
Yellow
White
Orange
Blue
Yellow
Blue
(20)
Terminal No.
1
2
3
4
10.5
22.1
(20)
Blue
2.5
Yellow
Note 1: The panel cutout dimension is the same for
Front-locking and Rearlocking Connectors.
Note 2: Rotational positioning is
not possible for connector rotation.
Ordering Information
Type
M12 Connector for Panel Mounting
Cable length L (m)
Rear Locking
Front Locking
0.5 m
0.5 m
Industrial Ethernet Connectors
Model
Straight
XS5P-T426-5
XS5P-T427-5
XS5@-T / XS6@-T
5
Precautions
■ Correct Use
■ General Precautions
Do not use the Connectors in an atmosphere or environment that
exceeds the specifications.
Connector Connection and Disconnection
• When connecting or disconnecting Connectors, be sure to hold the
Connectors by hand.
• Do not hold the cable when disconnecting Connectors.
• When mating Connectors, be sure to insert the plug all the way to
the back of the socket before attempting to lock the Connectors.
• Do not use tools of any sort to mate the Connectors. Always use
your hands. Pliers or other tools may damage the Connectors.
• Do not pull excessively on the Connectors or cables. Do not install
the Connectors or cables in any way that would place a load
directly on the mating section or cable connections. Doing so can
damage the Connectors or break the wires inside the cables.
• Install the Connectors and cables where they will not be stepped
on to prevent the wires inside the cables from being broken and to
prevent the Connectors from being damaged. If the Connectors or
cables must be installed where they might be stepped on, protect
them with covers.
• Refer to the specifications for your cables before bending the
cables and do not bend them past their minimum bending radius.
Wiring
• Lay the cables so that external force is not applied to the
Connectors. Otherwise, the degree of protection (IP67) may not
be achieved.
Degree of Protection
• The degree of protection of Connectors (IP67) is not for a fully
watertight structure. Do not the Connectors underwater.
• Do not step on or place any objects on the Connectors. Doing so
may damage the Connectors.
6
Industrial Ethernet Connectors
XS5@-T / XS6@-T
Omron Electronic Components, LLC
Terms and Conditions of Sales
I. GENERAL
1. Definitions: The words used herein are defined as follows.
(a) Terms:
These terms and conditions
(b) Seller:
Omron Electronic Components LLC and its subsidiaries
(c) Buyer:
The buyer of Products, including any end user in section III through VI
(d) Products: Products and/or services of Seller
(e) Including: Including without limitation
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,
invoices, purchase orders and other documents, whether electronic or in writing, relating
to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's
purchase order or other documents which are inconsistent with, or in addition to, these
Terms.
3. Distributor: Any distributor shall inform its customer of the contents after and including
section III of these Terms.
II. SALES
1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.
Buyer agrees to pay the price in effect at the time the purchase order is accepted by
Seller. Payments for Products received are due net 30 days unless otherwise stated in
the invoice. Buyer shall have no right to set off any amounts against the amount owing in
respect of this invoice.
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to
Buyer after deducting transportation charges, taxes and duties, and will be allowed only
if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past
due amounts owing to Seller.
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum
legal rate, whichever is less, on any balance not paid within the stated terms.
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer
shall make remittance to Seller at the then current exchange rate most favorable to
Seller; provided that if remittance is not made when due, Buyer will convert the amount
to U.S. dollars at the then current exchange rate most favorable to Seller available
during the period between the due date and the date remittance is actually made.
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining
any government approvals regarding the importation or sale of the Products.
7. Taxes: All taxes, duties and other governmental charges (other than general real
property and income taxes), including any interest or penalties thereon, imposed directly
or indirectly on Seller or required to be collected directly or indirectly by Seller for the
manufacture, production, sale, delivery, importation, consumption or use of the Products
sold hereunder (including customs duties and sales, excise, use, turnover and license
taxes) shall be charged to and remitted by Buyer to Seller.
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,
Seller reserves the right to stop shipments or require satisfactory security or payment in
advance. If Buyer fails to make payment or otherwise comply with these Terms or any
related agreement, Seller may (without liability and in addition to other remedies) cancel
any unshipped portion of Products sold hereunder and stop any Products in transit until
Buyer pays all amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer
indemnifies Seller fully against all costs or expenses arising in connection therewith.
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from
causes beyond its control, including earthquakes, fires, floods, strikes or other labor
disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,
delay in or lack of transportation or the requirements of any government authority.
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise
stated in writing by Seller), at which point title to and all risk of loss of the Products
shall pass from Seller to Buyer, provided that Seller shall retain a security interest in
the Products until the full purchase price is paid by Buyer;
(b) Delivery and shipping dates are estimates only; and
(c) Seller will package Products as it deems proper for protection against normal
handling and extra charges apply to special conditions.
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products
occurring before delivery to the carrier or any claim related to pricing or other charges
must be presented in detail in writing to Seller within 30 days of receipt of shipment.
III. PRECAUTIONS
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE
APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING
APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE
BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC
COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)
SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.
Buyer acknowledges that it alone has determined that the Products will meet their
requirements of the intended use in all cases. Buyer must know and observe all
prohibitions of use applicable to the Product/s.
2. Use with Attention: The followings are some examples of applications for which
particular attention must be given. This is not intended to be an exhaustive list of all
possible use of any Product, nor to imply that any use listed may be suitable for any
Product:
(a) Outdoor use, use involving potential chemical contamination or electrical
interference.
(b) Use in consumer Products or any use in significant quantities.
(c) Energy control systems, combustion systems, railroad systems, aviation systems,
medical equipment, amusement machines, vehicles, safety equipment, and
installations subject to separate industry or government regulations.
(d) Systems, machines, and equipment that could present a risk to life or property.
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY
SELLER.
5. Programmable Products: Seller shall not be responsible for the Buyer's programming of
a programmable Product.
IV. WARRANTY AND LIMITATION
1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in
materials and workmanship for a period of twelve months from the date of sale by Seller
(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY
OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OF THE PRODUCTS.
2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form
originally shipped with Buyer responsible for labor charges for removal or replacement
thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an
amount equal to the purchase price of the Product; provided that there shall be no
liability for Seller or its affiliates unless Seller's analysis confirms that the Products were
correctly handled, stored, installed and maintained and not subject to contamination,
abuse, misuse or inappropriate modification. Return of any Products by Buyer must be
approved in writing by Seller before shipment.
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL
LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF
THE PRODUCT ON WHICH LIABILITY IS ASSERTED.
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its
employees from and against all liabilities, losses, claims, costs and expenses (including
attorney's fees and expenses) related to any claim, investigation, litigation or proceeding
(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or
omissions under these Terms or in any way with respect to the Products.
V. INFORMATION; ETC.
1. Intellectual Property: The intellectual property embodied in the Products is the exclusive
property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way
without the written permission of Seller. Buyer (at its own expense) shall indemnify and
hold harmless Seller and defend or settle any action brought against Seller to the extent
that it is based on a claim that any Product made to Buyer specifications infringed
intellectual property rights of another party.
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or
tooling, all engineering and tooling shall remain the exclusive property of Seller. All
information and materials supplied by Seller to Buyer relating to the Products are
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted
employees and strictly prevent disclosure to any third party.
3. Performance Data: Performance data is provided as a guide in determining suitability
and does not constitute a warranty. It may represent the result of Seller's test conditions,
and the users must correlate it to actual application requirements.
4. Change In Specifications: Product specifications and descriptions may be changed at
any time based on improvements or other reasons. It is Seller’s practice to change part
numbers when published ratings or features are changed, or when significant
engineering changes are made. However, some specifications of the Product may be
changed without any notice.
5. Errors And Omissions: The information on Seller’s website or in other documentation
has been carefully checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses
regarding (a) export of the Products or information provided by Seller; (b) sale of
Products to forbidden or other proscribed persons or organizations; (c) disclosure to noncitizens of regulated technology or information.
VI. MISCELLANEOUS
1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing
between Buyer and Seller shall operate as a waiver of rights by Seller.
2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws).
Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any
dispute hereunder.
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller
relating to the Products, and no provision may be changed or waived unless in writing
signed by the parties.
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall
not invalidate any other provision.
Industrial Ethernet Connectors
XS5@-T / XS6@-T
7
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in
Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use.
Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
(iii) Use in consumer products or any use in significant quantities.
(iv) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
3. Performance Data. Performance data given in this publication is provided as
a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
4. Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Seller representative at any time to
confirm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the
best of our knowledge as of the date of this publication, with the requirements
of the European Union's Directive on the Restriction of certain Hazardous
Substances ("RoHS"), although the requirements of RoHS do not take effect
until July 2006. These requirements may be subject to change. Please consult
our website for current information.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
OMRON ELECTRONIC
COMPONENTS LLC
Global - http://www.omron.com
USA - http://www.components.omron.com
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
Cat. No. G019-E-01
8
09/10
Industrial Ethernet Connectors
Specifications subject to change without notice
XS5@-T / XS6@-T
Printed in USA