5.0SMCJ SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR PEAK PULSE POWER 5000 Watts STAND-OFF VOLTAGE 58 to 100 Volts FEATURES 0.128(3.25) • Low inductance • Plastic package has Underwriters Laboratory Flammability Classification 94V-O 0.108(2.75) • Glass passivated junction 0.245(6.22) 0.220(5.59) • For surface mounted applications in order to optimize board space. • High temperature soldering : 260°C /10 seconds at terminals 0.280(7.11) 0.260(6.60) • Lead free in comply with EU RoHS 2011/65/EU directives • Green molding compound as per IEC61249 Std. . (Halogen Free) • Case: JEDEC DO-214AB,Molded plastic over passivated junction. 0.103(2.62) 0.079(2.00) MECHANICAL DATA 0.012(0.305) 0.006(0.152) • Terminals: Solder plated,solderable per MIL-STD-750, Method 2026 0.050(1.27) 0.030(0.76) • Polarity: Color band denotes cathode end • Standard Packaging: 16mm tape (EIA-481) 0.008(0.203) 0.002(0.051) 0.320(8.13) 0.305(7.75) • Weight: 0.0082 ounce, 0.232 gram 1 Cathode 2 Anode MAXIMUM RATINGS AND CHARACTERISTICS Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz. For Capacitive load derate current by 20%. Rating Symbol Value Units Peak Power Dissipation (10/1000s waveform) (Notes 1) PPP 5000 Watts Peak Pulse Current on 10/1000s waveform (Notes 1) IPPM See table Amps Typical Thermal Resistance Junction to Air (Notes 2) RJA 110 Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JECED Method) I FSM 300 TJ,TSTG -55 to +150 Operating Junction and Storage Temperature Range C/W O Amps C O NOTES: 1.Non-repetitive current pulse. 2.Mounted on an FR4 PCB, single-sided copper, mini pad. 3.A transient suppressor is selected according to the working peak reverse voltage (V RWM), which should be equal to or greater than the DC or continuous peak operating voltage level. June 7,2013-REV.00 PAGE . 1 5.0SMCJ SERIES Re ve r s e S ta nd - o ff Vo lta g e Part Number V RW M ( No te s 3 ) B r e a k d o wn Vo lta g e V B R @ IT Mi n. Te s t C ur r e nt Re ve r s e Leakage Max.Clamp Voltage 10/1000s Peak Pulse Current 10/1000s IT IR @ VRWM VC @ IPP IPP Marking Code M a x. V V V mA A V A 5.0SMCJ58A 58 64.4 74.1 1 3 93.6 53.5 5HGG 5.0SMCJ60A 60 66.7 76.7 1 3 96.8 51.7 5HGK 5.0SMCJ64A 64 71.1 81.8 1 3 103 48.6 5HGM 5.0SMCJ70A 70 77.8 89.5 1 3 113 44.3 5HGP 5.0SMCJ75A 75 83.3 95.8 1 3 121 41.4 5HGR 5.0SMCJ78A 78 86.7 99.7 1 3 126 39.7 5HGT 5.0SMCJ85A 85 94.4 108.2 1 3 137 36.5 5HGV 5.0SMCJ90A 90 100 115.5 1 3 146 34.3 5HGX 100 111 128 1 3 162 30.9 5HGZ 5.0SMCJ100A June 7,2013-REV.00 PAGE . 2 5.0SMCJ SERIES 100 75 50 25 0 0 25 td,PULSE WIDTH,usec 75 100 125 150 175 200 T A ,AMBIENT TEMPERATURE, C CJ, Junction Capacitance (pF) I PPM ,PEAK PULSE CURRENT,% O T,TIME,ms IFSM - Peak Forward Surge Current (A) 50 10000 1000 VR=0V 100 50 70 90 110 VR, Reverse Bias Voltage (V) 350 300 250 200 150 100 50 0 1 10 100 Number of Cycles at 60Hz June 7,2013-REV.00 PAGE . 3 5.0SMCJ SERIES MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 3K per 13" plastic Reel T/R - 0.5K per 7" plastic Reel June 7,2013-REV.00 PAGE . 4 5.0SMCJ SERIES Part No_packing code_Version 5.0SMCJ58A_R1_00001 5.0SMCJ58A_R2_00001 For example : RB500V-40_R2_00001 Serial number Version code means HF Packing size code means 13" Part No. Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING June 7,2013-REV.00 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 5 5.0SMCJ SERIES Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. June 7,2013-REV.00 PAGE . 6