GS2GF~GS2MF SURFACE MOUNT RECTIFIER VOLTAGE 400~1000 Volts 2 Amperes CURRENT FEATURES • For surface mounted applications in order to optimize board space • Easy pick and place • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Low Forward Drop • High temperature soldering : 260°C /10 seconds at terminals • Glass Passivated Chip Junction • Ultra Thin Profile Package for Space Constrained Utilization • Package suitable for Automated Handling • Lead free in comply with EU RoHS 2011/65/EU directives • Green molding compound as per IEC61249 Std. . (Halogen Free) MECHANICAL DATA • • • • • Case: SMAF molded plastic Terminals: Solder plated, solderable per MIL-STD-750,Method 2026 Polarity: Color band denotes cathode end Standard packaging: 12mm tape (EIA-481) Weight: 0.0011 ounce, 0.0328 gram 1 Cathode 2 Anode MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. PA RA ME TE R S YM B OL GS 2 GF GS 2 J F GS 2 K F GS 2 M F UNITS Ma xi m um Re c urre nt P e a k Re ve r s e Vo lt a g e V RR M 400 600 800 1000 V Ma xi m um RM S Vo lt a g e V RM S 280 420 560 700 V Ma xi m um D C B lo c k i ng Vo lta g e V DC 400 600 800 1000 V Ma xi m um A ve ra g e F o r wa rd C urre nt IF ( AV ) 2 A P e a k F o rw a rd S urg e C urr e nt : 8 . 3 ms s i ng le ha lf s i ne -wa ve s up e ri m p o s e d o n ra t e d lo a d (J E D E C me t ho d ) IF S M 70 A Ma xi m um F o rwa r d Vo lta g e a t 2 A VF 1 .1 V Ma xi m um D C Re ve rs e C urr e nt a t Ra t e d D C B lo c k i ng Vo lt a g e IR 1 A Typ i c a l J unc t i o n C a p a c i t a nc e (V R = 4 V, f= 1 M Hz) CJ 18 pF RJL RJA 25 150 T J ,T S TG -5 5 to + 1 5 5 Typ i c a l The rma l Re s t i s ta nc e ( No te s 1 ) ( No te s 2 ) Op e r a ti ng a nd S to r a g e Te mp e ra t ur e Ra ng e O C /W O C NOTES : 1. Mounted on an FR4 PCB, single-sided copper, with 100cm 2 copper pad area 2. Mounted on an FR4 PCB, single-sided copper, mini pad. April 3,2013-REV.00 PAGE . 1 2.5 2 1.5 1 0.5 0 0 25 50 75 100 125 150 TC, Case Temperature (°C) CJ, Junction Capacitance (pF) IF, Forward Current (A) GS2GF~GS2MF Fig.1 Forward Current Derating Curve TJ = 125°C 1 TJ = 75°C 0.1 TJ = 25°C 0.01 100 200 300 400 500 600 700 800 900 1000 Rated Peak Reverse Voltage (V) Fig.3 Typical Reverse Characteristics April 3,2013-REV.00 1 1 10 100 VR, Reverse Bias Voltage (V) 10 IF, Forward Current (A) IR, Reverse Current (μA) 10 10 Fig.2 Typical Junction Capacitance 100 TJ = 150°C 100 TJ = 150°C 1 TJ = 125°C TJ = 75°C 0.1 TJ = 25°C 0.01 0.4 0.6 0.8 1 1.2 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics PAGE . 2 GS2GF~GS2MF MOUNTING PAD LAYOUT 0.232 (5.9) 0.063 (1.6) 0.075 (1.9) 0.106 (2.7) ORDER INFORMATION • Packing information T/R - 10K per 13" plastic Reel T/R - 3K per 7" plastic Reel April 3,2013-REV.00 PAGE . 3 GS2GF~GS2MF Part No_packing code_Version GS2GF_R1_00001 GS2GF_R2_00001 For example : RB500V-40_R2_00001 Serial number Part No. Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING April 3,2013-REV.00 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 4 GS2GF~GS2MF Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. April 3,2013-REV.00 PAGE . 5