F-213 HCMD–10–S–03.00–01–G (2,54 mm) .100" HCMD, HCMS, HCSD, HCSS SERIES IDC SOCKET & TERMINAL CABLE Mates with: TSW, MTSW, TST, EW, BST, LCW, ZST, MTLW, TSM, EJH TYPE STRIP SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?HCSD or www.samtec.com?HCSS NO. PINS PER ROW S –05, –08, –10, –12, –13, –15, –17, –20, –25, –36 = Single D HCSD, HCSS Insulator Material: Black Liquid Crystal Polymer Flammability Rating: UL 94V-O Insulation Resistance: 5000 MΩ Temperature Range: -20°C to +105°C (Rainbow Cable) -40°C to +105°C (Gray Cable) Withstanding Voltage: 1000 VRMS @ 60 Hz Contact: Phosphor Bronze Plating: 10µ" (0,25 µm) Au on contact area, 150µ" (3,81 µm) Sn on balance over 50µ" (1,27 µm) Ni. Current Rating: 1A per contact Contact Resistance: 10 mΩ Lead Size Range: .024" (0,61 mm) SQ to .026" (0,66 mm) SQ Lead Insertion Depth: .185" (4,70 mm) to .250" (6,35 mm) Insertion Force: 6 oz (1,67 N) average with .025" (0,64 mm) SQ probe Withdrawal Force: 3 oz (0,83 N) average with .025" (0,64 mm) SQ probe Wire: 28 AWG 7/36 stranded Tinned Copper RoHS Compliant: Yes ROW OPTION = Double (Color coded cable N/A for 31 thru 36 pins/row. See –G option.) END ASSEMBLY ASSEMBLED LENGTH –“XX.XX” = Assembled Length Assembled Length in INCHES (±1/8") 2 inches minimum HCM = Male Strip –S = Single End (3,30) .130 No. of Positions x .100 (2,54) + .180 (4,57) (5,08) .200 (7,87) .310 REF Socket or Male Plug on one end (0,51) .020 –D = Double End (0,64) .025 SQ TYP (2,54) .100 LEAD STYLE –01 –02 SPECIFICATIONS A For complete specifications and recommended PCB layouts see www.samtec.com?HCMD or www.samtec.com?HCMS (2,54) .100 Single (HCMS) Double (HCMD) A (3,05) .120 (5,84) .230 HCS = Socket Strip HCMD, HCMS Insulator Material: Black Liquid Crystal Polymer Flammability Rating: UL 94V-O Insulation Resistance: 5000 MΩ Temperature Range: -55°C to +80°C Withstanding Voltage: 1000 VRMS @ 60 Hz Terminal: Phosphor Bronze Plating: Sn over 50µ" (1,27 µm) Ni Current Rating: 1A per contact Wire: 28 AWG 7/36 stranded Tinned Copper RoHS Compliant: Yes Note: IDC assemblies are non-standard, non-returnable. No. of Positions x .100 (2,54) + .180 (4,57) (3,30) .130 (5,08) .200 Socket or Male Plug on each end –T = Transfer End (9,53) .375 REF (2,54) .100 (0,76) .030 SQ. Single TYP. (HCSS) (2,54) .100 Double (HCSD) Male Plug on one end with socket on other. Begin part number with HCM. WWW.SAMTEC.COM HCSS–15–S–03.00–01–G HCSD–10–S–03.00–01–T–G LEAD STYLE PLATING OPTION OTHER OPTIONS NOTCH POLARIZATION –N = Notch Polarization –01 = HCSS/HCSD or (3,05 mm) .120" tail for HCMS/HCMD = 10µ" (0,25 µm) Gold on contact area or tail, Tin on balance (Standard on HCSS & HCSD. Leave blank) –02 –T = (5,84 mm) .230" tail HCMS/HCMD only 01 (3,81) .150 Required for HCSS and HCSD. (Not available on HCMS or HCMD, unless Transfer, then only the socket is polarized.) = Tin (Standard on HCMS & HCMD. Leave blank) – P “XX” –S “XX” – ST “X” = Position Polarization 02 01 03 02 04 Single –R = Daisy Chain Single = Stripped & Tinned (50,80) 2.00 min. Specify Suffix from table. All dimensions are ± 1/16" (1,59 mm). Not available in 28 positions and higher. 04 02 (1,27) .050 –S = Reversed “XX” ± 1 /8" (3,18) Single Row Connectors 01 Outer Most (End of Assembly) 03 –ST8 –ST4 –ST2 –ST3 Double (101,60) 4.00 minimum When mating double row connector with two single row connectors, the outer most single will be connected to Conductor #1 and the inside single to Conductor #2. 1 /8" (3,18) 1 /4" (6,35) 1 /2" (12,70) 3 /8" (9,53) 7 –M = Middle Reversed 6 Specify “XX” as position. For Double the same position will be polarized on both ends. (Not available on HCM, unless Transfer, then only the socket is polarized) 3 – D “XX” = Daisy Chain, Double – B “XX” = Breakout (50,80) 2.00 min. Specify “XX” as number of conductors to be broken out. “XX” ± 1 /8" (3,18) Requires –SXX, –WXX or –DXX Double Row Strips 7 1 “XX” –G = Gray Cable Breakout starts with Number 1 lead indicated by brown wire or red stripe. Shown on top side. Standard cable is color coded. Specify –G for Gray cable with one red edge. 2 (101,60) 4.00 minimum (127,00) 5.00 max. (50,80) 2.00 min. –O Outer Most (End of Assembly) = Outside Reversed 6 –W “XX” 4 = Wiring Reversed Daisy Chain, Single –RW = Reversed Wiring #1 wire opposite position #1 Same as –S “XX” except outer strip connected to conductor #2 and inside strip connected to conductor #1. 5 WWW.SAMTEC.COM 6 Requires –SXX, –WXX or –DXX 7