Ordering number : ENA2102 STK433-130N-E Thick-Film Hybrid IC 2channel class-AB Audio Power IC 150W+150W Overview The STK433-130N-E is a hybrid IC designed to be used in 150W × 2ch class AB audio power amplifiers. Application • Audio Power amplifiers Features • Pin-to-pin compatible outputs ranging from 40W to 150W. • Miniature package. • Output load impedance: RL = 6Ω recommended. • Allowable load shorted time: 0.3 second • Allows the use of predesigned applications for standby and mute circuit. Series model STK433-040N-E STK433-060N-E STK433-130N-E STK433-330N-E Output1 (10%/1kHz) 40W × 2ch 50W × 2ch 150W × 2ch 150W × 3ch Output2 (0.4%/20Hz to 20kHz) 25W × 2ch 35W × 2ch 100W × 2ch 100W × 3ch Max. rating VCC (quiescent) ±38V ±46V ±71.5V ±71.5V Max. rating VCC (6Ω) ±36V ±40V ±63V ±63V Recommended operating VCC (6Ω) ±24V ±27V ±44V ±44V 67.0mm×25.6mm×9.0mm 64.0mm×36.6mm×9.0mm Dimensions (excluding pin height) 47.0mm×25.6mm×9.0mm STK433-840N-E STK433-870N-E STK433-890N-E Output1 (10%/1kHz) 40W × 4ch 60W × 4ch 80W × 4ch Output2 (0.4%/20Hz to 20kHz) 25W × 4ch 40W × 4ch 50W × 4ch Max. rating VCC (quiescent) ±38V ±50V ±54V Max. rating VCC (6Ω) ±36V ±44V ±47V Recommended operating VCC (6Ω) ±25V ±30V ±34V Dimensions (excluding pin height) 64.0mm×31.1mm×9.0mm 78.0mm×44.1mm×9.0mm Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' s products or equipment. 80112HKPC 018-11-0062 No.A2102-1/11 STK433-130N-E Specifications Absolute Maximum Ratings at Ta = 25°C, Tc = 25°C unless otherwise specified Parameter Symbol Maximum power supply voltage Minimum operation supply voltage #13 Operating voltage Conditions VCC max (0) Non- signal VCC max (1) Signal, RL ≥ 6Ω Ratings VCC min *5 VST OFF max Unit ±71.5 V ±63 V ±10 V -0.3 to +5.5 V Thermal resistance θj-c Per one power transistor 1.6 °C/W Junction temperature Tj max Should satisfy Tj max and Tc max 150 °C Operating substrate temperature Tc max 125 °C Storage temperature Tstg -30 to +125 °C Allowable time for load short-circuit ts VCC = ±44V, RL = 6Ω, f = 50Hz PO = 100W, 1ch drive *4 0.3 s Operating Characteristics at Tc = 25°C, RL = 6Ω (Non-inductive Load), Rg = 600Ω, VG = 30dB Conditions *2 Parameter Output power Total harmonic distortion Frequency characteristics Symbol *1 *1 *1 Input impedance Output noise voltage PO 1 ±44 20 to 20k 0.4 PO 2 ±44 1k 10 THD 1 ±44 20 to 20k THD 2 ±44 1k ±44 ri ±44 1k PO [W] THD min [%] 96 5.0 VG=30dB 1.0 +0 -3dB 100 ±53 Rg=2.2kΩ ±53 No load Output neutral voltage VN ±53 VST ON ±44 Stand-by VST OFF ±44 Operation Unit W 0.4 20 to 50k % Hz 55 ICCO #13 Stand-by OFF threshold *5 max 0.01 1.0 VNO *5 typ 150 Quiescent current #13 Stand-by ON threshold *3 [Hz] fL, fH f Ratings VCC [V] kΩ 1.0 mVrms 40 80 100 mA -70 0 +70 mV 0 0.6 V 3.0 5.5 V 2.5 Note *1. 1channel operation. *2. All tests are measured using a constant-voltage supply unless otherwise specified *3. The output noise voltage is peak value of an average-reading meter with a rms value scale (VTVM). A regulated AC supply (50Hz) should be used to eliminate the effects of AC primary line flicker noise *4. Allowable time for load short-circuit and output noise voltage are measured using the specified transformer power supply. *5. The impression voltage of ‘#13 (Stand-By) pin’ must not exceed the maximum rating. Power amplifier operate by impressing voltage +2.5 to +5.5v to ‘#13 (Stand-By) pin’. * Please connect - PreVcc pin (#1 pin)with the stable minimum voltage. and connect so that current does not flow in by reverse bias. * In case of heat sink design, we request customer to design in the condition to have assumed market. * The case of this Hybrid-IC is using thermosetting silicon adhesive (TSE322SX). * Weight of HIC : (typ) 18.4g Outer carton dimensions (W×L×H) : 429mm×245mm×275mm Specified transformer power supply (Equivalent to MG-250) DBA40C 10000μF + + 10000μF +VCC 500Ω 500Ω -VCC No.A2102-2/11 STK433-130N-E Package Dimensions unit : mm (typ) 67.0 60.0 2.0 (16.0) 20.8 15 0.4 4.0 1 25.6 16.0 5.0 3.6 9.0 (R1.8) 0.5 2.9 14 2.0=28.0 5.5 RoHS directive pass Equivalent Circuit 3 8 Pre Driver CH1 Pre Driver CH2 11 15 12 14 Stand-by Circuit 1 2 SUB 9 5 4 6 7 10 13 No.A2102-3/11 STK433-130N-E Application Circuit STK433-130N-E SUB Ch1 Ch1 Ch2 Ch2 /AMP IC Ch1 -PRE -VCC +VCC OUT OUT OUT OUT +PRE GND GND IN 1 2 3 4 5 R20 R23 6 7 8 9 10 11 Ch1 Ch2 NF ST-BY NF Ch2 IN 12 15 13 14 R21 C19 R08 C20 R30 Stand-by R09 C05 C10 C11 + R11 C13 + R12 C14 R06 + R03 GND C07 R05 + C04 R02 L02 +VCC C01 + C23 + R01 C03 + Ch2 C08 R15 C17 R18 Ch1 Ch2 GND GND C02 + -VCC L01 R17 C16 GND Ch1 R14 PCB Layout Example Top view No.A2102-4/11 STK433-130N-E STK433-040N-E/060N-E/130N-E/330N-E PCB PARTS LIST PCB Name : STK403-000Sr/100Sr/200Sr PCBA Location No. (*2) 2ch Amp doesn't mount parts of ( RATING Component ). STK433- Hybrid IC#1 Pin Position - 040N-E 060N-E R01 100Ω, 1W ○ R02, R03, (R04) 1kΩ, 1/6W ○ R05, R06, (R07), R08, R09, (R10) 56KΩ, 1/6W ○ R11, R12, (R13) 1.8KΩ, 1/6W ○ R14, R15, (R16) 4.7Ω, 1/4W ○ R17, R18, (R19) 4.7Ω, 1W ○ R20, R21, (R22) 0.22Ω, 5W ○ C01, C02, C03, C23 (*3) 100μF, 100V ○ C04, C05, (C06) 2.2μF, 50V ○ (*1) C07, C08, (C09) 470pF, 50V ○ C10, C11, (C12) 3pF, 50V ○ C13, C14, (C15) 10μF, 10V ○ (*1) C16, C17, (C18) 0.1μF, 50V C19, C20, (C21) ***pF, 50V R34, R35, (R36) 3kΩ, 1/6W L01, L02, (L03) 3μH ○ Tr1 VCE ≥ 75V, IC ≥ 1mA ○ D1 Di ○ Stand-By R30 (*4) ***kΩ, 1/6W ○ (*4) Control R31 33kΩ, 1/6W ○ Circuit R32 1kΩ, 1/6W ○ R33 2kΩ, 1/6W ○ C32 33μF, 10V ○ J1, J2, J3, J4, J5, J6, J8, J9 J7, JS2, JS3, JS4, JS5, JS7 JS8, JS9 JS6, JS10 JS1 (R23) 130N-E/ 330N-E ○ 100pF 56pF N.C. Short - ○ - - - ○ 100Ω, 1W (*1) Capacitor mark “A” side is “ – ” (negative). (*2) STK433-040N-E/060N-E/130N-E (2ch Amp) doesn't mount parts of ( (*3) Add parts C23 to the other side of PCB. (*4) Recommended standby circuit is used. ○ ) No.A2102-5/11 STK433-130N-E Recommended external components STK433-040N-E/060N-E/130N-E/330N-E Parts Recommended Location value R01, R23 100Ω/1W Above Below Recommended value Recommended value Resistance for Ripple filter. (Fuse resistance is recommended. Short-through current Short-through current Ripple filter is constituted with C03, C23.) may decrease at may increase at high high frequency. frequency. Circuit purpose R02, R03, R04 1kΩ Resistance for input filters. R05, R06, R07 56kΩ Input impedance is determined. R08, R09, R10 56kΩ Voltage Gain (VG) is determined with R11, R12, R13 R11, R12, R13 1.8kΩ Voltage Gain (VG) is determined with R8, R9, R10 It may oscillate. With especially no (As for VG, it is desirable to set up by R11, R12, R13) (Vg < 30dB) problem R14, R15, R16 4.7Ω Resistance for oscillation prevention. - - R17, R18, R19 4.7Ω/1W Resistance for oscillation prevention. - - R20, R21, R22 0.22Ω/2W This resistance is used as detection resistance of the protection Decrease of circuit application. Maximum output - - Output neutral voltage(VN) shift. (It is referred that R05=R08, R06=R09) - - It may cause thermal runaway Power R30 Note *5 Select Restriction resistance, for the impression voltage of ‘#17 (Stand-By) pin’ must not exceed the maximum rating. C01, C02 100μF/50V Capacitor for oscillation prevention. • Locate near the HIC as much as possible. • Power supply impedance is lowered and stable operation of - - the IC is carried out. (Electrolytic capacitor is recommended.) C03, C23 100μF/50V Decoupling capacitor The change in the Ripple ingredient mixed in • The Ripple ingredient mixed in an input side Is removed from a an input side from a power supply line power supply line. (Ripple filter is constituted with R01, R23.) C04, C05, C06 2.2μF/50V C07, C08, C09 470pF Input coupling capacitor.(for DC current prevention.) - Input filter capacitor • A high frequency noise is reduced with the filter constituted by - R02, R03, R04 C10, C11, C12 3pF C13, C14, C15 10μF/10V Capacitor for oscillation prevention. It may oscillate. Negative feedback capacitor. The voltage gain (VG) The voltage gain (VG) The cutoff frequency of a low cycle changes. of low frequency is of low frequency (fL = 1/(2π ⋅ C13 ⋅ R11)) extended. However, decreases. the pop noise at the time of a power supply injection also becomes large. C16, C17, C18 0.1μF Capacitor for oscillation prevention. It may oscillate. C19, C20, C21 100pF (040N-E) Capacitor for oscillation prevention. It may oscillate. 56pF (060N-E) N.C. (130N-E, 330N-E) L01, L02, L03 3μH Coil for oscillation prevention. With especially It may oscillate. no problem No.A2102-6/11 STK433-130N-E Pin Layout [STK433-000N/-100N/-300Nsr Pin Layout] 1 2 3 4 5 (Size) 47.0mm×25.6mm×9.0mm 6 7 8 9 10 11 12 13 14 15 I N S N I N F T F N 2ch classAB/2.00mm STK433-040N 40W/JEITA - - + O O O O + STK433-060N 50W/JEITA P V V U U U U P S G R C C T T T T R U N / / A / / E C C / / / / E B D C C N C C C C C C H H D H H (Size) 67.0mm×25.6mm×9.0mm H H H H 1 1 ⎪ 2 2 STK433-130N 150W/JEITA 1 1 2 2 B + - + - Y 4 5 6 7 13 14 15 1 2 3 (Size) 64.0mm×36.6mm×9.0mm STK433-330N 150W/JEITA 8 9 10 11 12 16 17 18 19 3ch classAB/2.00mm - - + O O O O + I N S N I I N O O P V V U U U U P S G N F T F N N F U U R C C T T T T R U N / / A / / / / T T E C C / / / / E B D C C N C C C C / / C C C C H H D H H H H C C H H H H 1 1 ⎪ 2 2 3 3 H H 1 1 2 2 B 3 3 + - + - Y + - 5 6 7 18 19 20 21 22 23 [STK433-000N/-100N/-800Nsr Pin Layout] 1 2 3 4 (Size) 47.0mm×25.6mm×9.0mm 8 9 10 11 12 13 14 15 I N S N I N F T F N 2ch classAB/2.00mm STK433-040N 40W/JEITA - - + O O O O + STK433-060N 50W/JEITA P V V U U U U P S G R C C T T T T R U N / / A / / E C C / / / / E B D C C N C C C C C C H H D H H (Size) 67.0mm×25.6mm×9.0mm H H H H 1 1 ⎪ 2 2 STK433-130N 150W/JEITA 1 1 2 2 B + - + - Y 14 15 16 1 2 3 4 5 6 7 8 9 STK433-840N 40W/JEITA - - + O O O O + I N S N I N I I N O O O O STK433-870N 60W/JEITA P V V U U U U P S G N F T F N F N N F U U U U R C C T T T T R U N / / A / / / / / / T T T T E C C / / / / E B D C C N C C C C C C / / / / C C C C H H D H H H H H H C C C C (Size) 78.0mm×44.1mm×9.0mm H H H H 1 1 ⎪ 2 2 3 3 4 4 H H H H STK433-890N 80W/JEITA 1 1 2 2 B 3 3 4 4 + - + - Y - + - + (Size) 64.0mm×31.1mm×9.0mm 10 11 12 13 17 4ch classAB/2.00mm No.A2102-7/11 STK433-130N-E 240 Output power, PO/ch -- W 220 200 180 160 f=20kHz f=1kHz 2 3 5 7 1.0 2 3 5 7 10 2 3 5 7 100 Output power, PO/ch -- W 2 3 5 71000 Total power dissipation within the board, Pd -- W 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01 7 5 3 2 0.001 0.1 260 THD – PO VCC=±44V RL=6Ω 2ch Drive VG=30dB Rg=600Ω Tc=25°C PO – VCC f=1kHz RL=6Ω 2ch Drive VG=30dB Rg=600Ω Tc=25°C 260 240 220 200 180 160 140 120 100 80 60 40 20 0 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 5 7 100 100 80 60 VCC=±44V RL=6Ω 2ch Drive VG=30dB Rg=600Ω Tc=25°C 200 180 140 100 80 60 20 20 50 Supply voltage, VCC -- ±V 60 THD=0.4% 120 40 40 THD=10% 160 40 30 5 71000 PO – f 220 120 2 3 Output power, PO/ch -- W 240 140 0 20 Pd – PO VCC=±44V f=1kHz RL=6Ω 2ch Drive VG=30dB Rg=600Ω Tc=25°C 260 Output power, PO/ch -- W 100 7 5 3 2 T H TH D= D =0 10 .4 % % Total harmonic distortion, THD -- % Characteristic of Evaluation Board 0 10 2 3 5 7 100 2 3 5 7 1k 2 3 5 7 10k Frequency, f -- Hz 2 3 5 7100k No.A2102-8/11 STK433-130N-E A Thermal Design Tip For STK433-130N-E Amplifier [Thermal Design Conditions] The thermal resistance (θc-a) of the heat-sink which manages the heat dissipation inside the Hybrid IC will be determined as follow: (Condition 1) The case temperature (Tc) of the Hybrid IC should not exceed 125°C Pd × θc-a + Ta < 125°C ························································································(1) Where Ta : the ambient temperature for the system (Condition 2) The junction temperature of each power transistor should not exceed 150°C Pd × θc-a + Pd/N × θj-c + Ta < 150°C··································································(2) Where N : the number of transistors (two for 1 channel , ten for channel) θj-c : the thermal resistance of each transistor (see specification) Note that the power consumption of each power transistor is assumed to be equal to the total power dissipation (Pd) divided by the number of transistors (N). From the formula (1) and (2), we will obtain: θc-a < (125 − Ta)/Pd·····························································································(1)’ θc-a < (150 − Ta)/Pd − θj-c/N···············································································(2)’ The value which satisfies above formula (1)’ and (2)’ will be the thermal resistance for a desired heat-sink. Note that all of the component except power transistors employed in the Hybrid IC comply with above conditions. [Example of Thermal Design] Generally, the power consumption of actual music signals are being estimated by the continuous signal of 1/8 PO max. (Note that the value of 1/8 PO max may be varied from the country to country.) (Sample of STK433-130N-E ; 100W×2ch) If VCC is ±44V, and RL is 6Ω, then the total power dissipation (Pd) of inside Hybrid IC is as follow; Pd = 91W (at 12.5W output power,1/8 of PO max) There are four (4) transistors in Audio Section of this Hybrid IC, and thermal resistance (θj-c) of each transistor is 1.6°C/W. If the ambient temperature (Ta) is guaranteed for 50°C, then the thermal resistance (θc-a) of a desired heatsink should be; From (1)’ θc-a < (125 − 50)/91 < 0.82 From (2)’ θc-a < (150 − 50)/91 − 1.6/4 < 0.70 Therefore, in order to satisfy both (1)’ and (2)’, the thermal resistance of a desired Heat-sink will be 0.70°C/W. [Note] Above are reference only. The samples are operated with a constant power supply. Please verify the conditions when your system is actually implemented. No.A2102-9/11 STK433-130N-E STK433-000N-E/100N-E series Stand-by Control & Mute Control & Load-Short Protection Application (*1) Please use restriction resistance as there is no Stand-by terminal voltage (#13pin) beyond maximun rating (VSTmax). STK433-000N-E/100N-E series Ch1 Ch1 Ch2 Ch2 +PRE SUB GND Ch1 -PRE -VCC +VCC OUT IN OUT OUT OUT 4 5 7 56kΩ 6.8kΩ 56kΩ 56kΩ 6.8kΩ 6 8 9 10 Ch1 ST-BY Ch2 NF NF Ch2 IN 12 15 11 13 14 1kΩ 0.22kΩ/5w 3 Stand-by Control(ex) 33kΩ (*1) 2.7kΩ H : Operation Mode(+5V) + 33μF L : Stand-by Mode(0V) 2kΩ /10V 56kΩ 2 0.22kΩ/5w 1 Ch2 IN + Load Short Protection Circuit + + 10kΩ 22kΩ GND 10kΩ 56kΩ Ch1 IN + 10kΩ 1kΩ 0.1μF +VCC 10kΩ + + Latch Up Circuit R1 (*4) + V1 Mute Control H : Single Mute L : Normal 2.2kΩ Ch2 OUT GND +5V Stand-by Control GND + GND +5V -VCC Mute Control Ch1 OUT MUTE (*4) R1 is changed depending on the power-supply voltage(-VCC). Please set resistance(R1) to become [V1=0V] by the following calculation types. ST-BY PLAY MUTE ST-BY [STK433-000N-E/100N-E series Stand-By Control Example] [Feature] • The pop noise which occurs to the time of power supply on/off can be improved substantially by recommendation Stand-By Control Application. • Stand-By Control can be done by additionally adjusting the limitation resistance to the voltage such as miccom, the set design is easy. (Reference circuit) STK433-000N-E/100N-E series test circuit To Stand-By Control added +5V. 1kΩ (*3) #13pin Stand-By OFF threshold. 33kΩ 2.7kΩ (*1) VST ΔVBE + 33μF (*2) 2kΩ (*3) Stand-by Control H : Operation Mode(+5V) L : Stand-by Mode(0V) IST 1 2 3 4 5 6 7 8 9 10 11 SUB/AMP IC Ch1 Ch1 Ch2 Ch2 -PRE -VCC +VCC Ch1 GND IN OUT OUT OUT OUT +PRE GND STK433-000N-E/100N-E series 12 13 Ch1 STNF BY 14 15 Ch2 Ch2 NF IN ΔVBE Stand-By Circuit in PreDriver IC 4.7kΩ (*2) Switching transistor in the bias circuit ex)Stand-By Control Voltage VST=+5V VST is set by the limitation resistance(*1). .IST=(VST-VBE*2)/((*1)+(*2)) =(5v-0.6v*2)/(4.7 k Ω+2.7kΩ) =0.513(mA) .VST=IST 4.7kΩ+VBE=0.513 4.7k+0.6=3.0v [Operation explanation] #13pin Stand-By Control Voltage VST (1) Operation Mode The switching transistor in the bias circuit turns on and places the amplifier into the operating mode, when 13pin (VST) voltage added above 2.5V (typ 3.0V). (2) Stand-By Mode When 13pin (VST) voltage is stopped (= 0V), the switching transistor in the bias circuit turn off. placing the amplifier into the standby mode. (*1) The current limiting resistor must be used to ensure that stand-by pin (13pin) voltage does not exceed its maximum rated value VST max. (*2) The pop noise level when the power is turned on can be reduced by setting the time constant with a capacitor in operating mode. (*3) Determines the time constant at which the capacitor (*2) is discharged in stand-by mode. No.A2102-10/11 STK433-130N-E SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of August, 2012. Specifications and information herein are subject to change without notice. PS No.A2102-11/11