STMICROELECTRONICS HCC4002BD

HCC40xxx
HCC45xxx
Rad-hard high voltage CMOS logic series
Features
■
3 to 20 V max operating voltage
■
Bufferized inputs and outputs
■
Standardized symmetrical outputs
characteristic
■
50 ns typical propagation delays
■
100 nA max 25 °C input current
■
100% tested 20 V quiescent current
■
5-10-15 V parametric testing
■
Hermetic packages
■
Rad-hard 100 kRad TID at 11rad/sec dose rate
■
SEL-SEU immune to 72 MeV/cm²/mg LET ions
■
ESCC qualified
Flat-14
Flat-16
DIL-14
DIL-16
Description
The HCC40xxx and HCC45xxx series are
composed of over 70 types of high voltage CMOS
functions, offering a set of highly noise tolerant
gates, Flip-Flops, multiplexers, counters, bus
interfaces and several other functions. The
radiation hardness, the single event latch-up
(SEL) and the single event upset (SEU) immunity
and the housing in hermetic packages of all types
of both series make them usable in the most
difficult environmental conditions.
Flat-24
DIL-24
The upper metallic lid is not electrically connected to any
pins, nor to the IC die inside the package.
The complete specification of each type is
available from the European Space Components
Coordination web site (ESCC):
https://spacecomponents.org/. ST guarantees full
compliance of qualified parts with these ESCC
detailed specifications.
August 2011
Doc ID 17102 Rev 3
1/24
www.st.com
24
Contents
HCC4xxx
Contents
1
HCC family overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Input equivalent circuit diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3
Maximum rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.1
Recommended operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5
Order codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2/24
Doc ID 17102 Rev 3
HCC family overview
Table 1.
Device summary
Part number
Description
HCC4xxx
1
Radiation level
Agency
qualification
EPPL ESCC specification
Package
Doc ID 17102 Rev 3
Rad-hard quad 2-input NOR gate
Y
9201/041
Flat-14 - DIL-14
HCC4002B
Rad-hard dual 4-input NOR gate
-
9201/042
Flat-14 - DIL-14
HCC4008B
Rad-hard 4-bit full adder
-
9202/039
Flat-16 - DIL-16
HCC4011B
Rad-hard quad 2-input NAND gate
Y
9201/043
Flat-14 - DIL-14
HCC4012B
Rad-hard dual 4-input NAND gate
-
9201/044
Flat-14 - DIL-14
HCC4013B
Rad-hard dual D Flip-Flop
Y
9203/023
Flat-14 - DIL-14
HCC4014B
Rad-hard 8-stage static synchronous shift register
Y
9306/014
Flat-16 - DIL-16
HCC4015B
Rad-hard dual 4-stage static shift register
Y
9306/015
Flat-16 - DIL-16
HCC4016B
Rad-hard quad bilateral switch
-
9202/050
Flat-14 - DIL-14
HCC4017B
Rad-hard decade counter/divider
Y
9204/020
Flat-16 - DIL-16
HCC4018B
Rad-hard presettable divide-by N counter
-
9204/021
Flat-16 - DIL-16
HCC4019B
Rad-hard quad AND/OR select gate
Y
9202/051
Flat-16 - DIL-16
HCC4020B
Rad-hard 14-stage binary/ripple counter
Y
9204/022
Flat-16 - DIL-16
HCC4021B
Rad-hard 8-stage static shift register
Y
9306/016
Flat-16 - DIL-16
HCC4022B
Rad-hard divide-by-8 counter/divider
-
9204/023
Flat-16 - DIL-16
HCC4023B
Rad-hard triple 3-input NAND gate
Y
9201/045
Flat-14 - DIL-14
HCC4024B
Rad-hard 7-stage binary/ripple counter
Y
9204/024
Flat-14 - DIL-14
HCC4025B
Rad-hard triple 3-input NOR gate
-
9201/046
Flat-14 - DIL-14
HCC4027B
Rad-hard dual J-K master-slave Flip-Flop
Y
9203/022
Flat-16 - DIL-16
HCC4028B
Rad-hard BCD-to-decimal decoder
Y
9205/010
Flat-16 - DIL-16
HCC4029B
Rad-hard presettable up/down counter
Y
9204/025
Flat-16 - DIL-16
100 krad (Si)
ESCC
3/24
HCC family overview
HCC4001B
Device summary (continued)
Part number
Description
Radiation level
Agency
qualification
EPPL ESCC specification
Package
HCC4030B
Rad-hard quad exclusive OR gate
Y
9201/047
Flat-14 - DIL-14
HCC4034B
Rad-hard 8-stage static bidirectional bus register
-
9306/025
Flat-24 - DIL-24
HCC4035B
Rad-hard 4-stage parallel I/O shift register
Y
9306/018
Flat-16 - DIL-16
HCC4040B
Rad-hard 12-stage binary/ripple counter
Y
9204/026
Flat-16 - DIL-16
-
9202/040
Flat-14 - DIL-14
HCC4041UB Rad-hard quad true/complement buffer
Doc ID 17102 Rev 3
HCC4042B
Rad-hard quad clocked D latch
-
9202/041
Flat-16 - DIL-16
HCC4043B
Rad-hard quad 3-state NOR R/S latch
-
9202/042
Flat-16 - DIL-16
HCC4044B
Rad-hard quad 3-state NAND R/S latch
-
9202/043
Flat-16 - DIL-16
HCC4046B
Rad-hard micropower phase locker loop
-
9202/044
Flat-16 - DIL-16
HCC4047B
Rad-hard monostable/astable multivibrator
Y
9207/003
Flat-14 - DIL-14
Y
9202/045
Flat-16 - DIL-16
Y
9202/046
Flat-16 - DIL-16
HCC4049UB Rad-hard hex inverting buffer/converter
HCC4050B
Rad-hard hex non-inverting buffer/converter
100 krad (Si)
ESCC
HCC4051B
Rad-hard single 8-channel analog mux/demux
Y
9202/047
Flat-16 - DIL-16
HCC4052B
Rad-hard different 4-channel analog mux/demux
-
9202/048
Flat-16 - DIL-16
HCC4053B
Rad-hard triple 2-channel analog mux/demux
-
9202/049
Flat-16 - DIL-16
HCC4060B
Rad-hard 14-stage counter/divider AND oscillator
-
9204/052
Flat-16 - DIL-16
HCC4063B
Rad-hard 4-bit magnitude comparator
Y
9209/001
Flat-16 - DIL-16
HCC4066B
Rad-hard quad bilateral switch
Y
9408/005
Flat-14 - DIL-14
HCC4067B
Rad-hard single 16-channel analog mux/demux
-
9408/009
Flat-24 - DIL-24
HCC4068B
Rad-hard 8-input NAND/AND gate
-
9201/061
Flat-14 - DIL-14
Y
9401/010
Flat-14 - DIL-14
HCC4069UB Rad-hard hex inverter
HCC family overview
4/24
Table 1.
Rad-hard quad exclusive OR gate
-
9201/048
Flat-14 - DIL-14
HCC4071B
Rad-hard quad 2-input OR gate
Y
9201/063
Flat-14 - DIL-14
HCC4072B
Rad-hard dual 4-input OR gate
-
9201/082
Flat-14 - DIL-14
HCC4xxx
HCC4070B
Part number
Device summary (continued)
Description
Radiation level
Agency
qualification
EPPL ESCC specification
Package
Doc ID 17102 Rev 3
HCC4073B
Rad-hard triple 3-input AND gate
Y
9201/064
Flat-14 - DIL-14
HCC4075B
Rad-hard triple 3-input OR gate
-
9201/065
Flat-14 - DIL-14
HCC4076B
Rad-hard 4-bit D-type register
Y
9306/022
Flat-16 - DIL-16
HCC4077B
Rad-hard quad exclusive NOR gate
-
9201/055
Flat-14 - DIL-14
HCC4078B
Rad-hard 8-input NOR/OR gate
-
9201/062
Flat-14 - DIL-14
HCC4081B
Rad-hard quad 2-input AND gate
Y
9201/052
Flat-14 - DIL-14
HCC4082B
Rad-hard dual 4-input AND gate
-
9201/066
Flat-14 - DIL-14
HCC4093B
Rad-hard quad 2-input NAND Schmitt trigger
Y
9409/002
Flat-14 - DIL-14
HCC4094B
Rad-hard 8-stage shift-and-store bus register
Y
9306/026
Flat-16 - DIL-16
HCC4098B
Rad-hard dual monostable multivibrator
-
9206/002
Flat-16 - DIL-16
HCC4099B
Rad-hard 8-bit addressable latch
Y
9202/058
Flat-16 - DIL-16
HCC40103B Rad-hard presettable 8-bit binary down counter
Y
9204/036
Flat-16 - DIL-16
HCC40106B Rad-hard hex schmitt trigger
Y
9409/005
Flat-14 - DIL-14
HCC40107B Rad-hard dual 2-input NAND buffer/driver
Y
9401/013
Flat-14 - DIL-14
HCC40109B Rad-hard quad low-to-high voltage level shifter
Y
9407/003
Flat-16 - DIL-16
HCC40161B Rad-hard binary counter with asynchronous clear
Y
9204/054
Flat-16 - DIL-16
HCC40174B Rad-hard hex D Flip-Flop
Y
9203/038
Flat-16 - DIL-16
HCC40193B Rad-hard presettable 4-bit binary up-down counter
-
9204/041
Flat-16 - DIL-16
HCC4502B
Rad-hard strobed hex inverter/buffer
Y
9401/006
Flat-16 - DIL-16
HCC4503B
Rad-hard hex buffer 3-state non-inverter
Y
9401/030
Flat-16 - DIL-16
HCC4508B
Rad-hard dual 4-bit Latch 3-state outputs
Y
9202/063
Flat-24 - DIL-24
HCC4512B
Rad-hard 8-channel data selec. with 3-state output
Y
9408/006
Flat-16 - DIL-16
100 krad (Si)
HCC4xxx
Table 1.
ESCC
HCC family overview
5/24
Part number
Device summary (continued)
Description
Radiation level
Agency
qualification
EPPL ESCC specification
Package
HCC4514B
Rad-hard 4-bit Latch / 4-to-16 line decoder output high
-
9408/012
Flat-24 - DIL-24
HCC4515B
Rad-hard 4-bit Latch / 4-to-16 line decoder output low
-
9205/011
Flat-24 - DIL-24
HCC4516B
Rad-hard presettable 4-bit binary up/down counter
-
9204/045
Flat-16 - DIL-16
HCC4520B
Rad-hard dual binary up-down counter
-
9204/028
Flat-16 - DIL-16
100 krad (Si)
ESCC
HCC4532B
Rad-hard 8-input priority encoder
-
9202/065
Flat-16 - DIL-16
HCC4538B
Rad-hard dual precision monostable multivibrator
-
9207/007
Flat-16 - DIL-16
HCC4555B
Rad-hard dual 1-of-4 decoder/demux output high
Y
9408/011
Flat-16 - DIL-16
HCC4556B
Rad-hard dual 1-of-4 decoder/demux output low
-
9408/025
Flat-16 - DIL-16
Doc ID 17102 Rev 3
Note:
HCC family overview
6/24
Table 1.
Contact ST sales office for information about the specific conditions for other CMOS4000 part numbers and product in die form
HCC4xxx
HCC4xxx
2
Input equivalent circuit diagram
Input equivalent circuit diagram
Figure 1.
Input equivalent circuit diagram
Doc ID 17102 Rev 3
7/24
Maximum rating
3
HCC4xxx
Maximum rating
Stressing the device above the rating listed in the “absolute maximum ratings” table may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in the operating sections of
this specification is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect device reliability.
Table 2.
Absolute maximum ratings
Symbol
VDD
Parameter
Supply voltage
Unit
-0.5 to 22
V
VI
DC input voltage
-0.5 to VDD + 0.5
V
II
DC input current
±10
mA
PD
Power dissipation per package
200
mW
TOP
Operating temperature
-55 to +125
°C
TSTG
Storage temperature
-65 to +150
°C
Value
Unit
20
V
0 to VDD
V
-55 to +125
°C
Note:
All voltage values are referred to VSS pin voltage.
3.1
Recommended operating conditions
Table 3.
Recommended operating conditions
Symbol
VDD
VI
TOP
8/24
Value
Parameter
Supply voltage
Input voltage
Operating temperature
Doc ID 17102 Rev 3
HCC4xxx
4
Package mechanical data
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK is an ST trademark.
Doc ID 17102 Rev 3
9/24
Package mechanical data
Table 4.
HCC4xxx
Ceramic Flat-14 mechanical data
mm
Dim
Min
Typ
Max
A
6.75
6.91
7.06
B
9.76
9.95
10.14
C
1.49
D
0.10
0.127
0.15
E
7.50
7.62
7.75
1.95
F
1.27
G
0.38
0.43
H
6.0
L
Figure 2.
0.48
18.75
en
M
0.38
N
4.31
22.0
Ceramic Flat-14 mechanical drawings
G
F
D
H
14
8
L
N
A
7
1
H
M
E
B
Note:
10/24
C
016029E
The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the
package. Connecting unused pins or metal lid to ground or to the power supply will not affect
the electrical characteristics.
Doc ID 17102 Rev 3
HCC4xxx
Package mechanical data
Table 5.
Ceramic DIL-14 mechanical data
Mm.
Dim.
Min.
Typ
A
2.1
2.54
a1
3.00
3.70
a2
0.63
0.88
1.14
B
1.82
2.03
2.39
b
0.40
0.45
0.50
b1
0.20
0.254
0.30
D
18.79
19.00
19.20
E
7.36
7.62
7.87
e
2.54
e1
15.11
15.24
15.37
e2
7.62
7.87
8.12
F
7.11
7.75
I
Figure 3.
Max.
3.70
K
10.90
L
1.14
12.1 n
1.27
1.5
Ceramic DIL-14 mechanical drawings
0016173H
Note:
The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the
package. Connecting unused pins or metal lid to ground or to the power supply will not affect
the electrical characteristics.
Doc ID 17102 Rev 3
11/24
Package mechanical data
Table 6.
HCC4xxx
Ceramic Flat-16 mechanical data
mm.
Dim.
Min.
Typ
Max.
A
6.75
6.91
7.06
B
9.76
9.94
10.14
C
1.49
D
0.102
0.127
0.152
E
8.76
8.89
9.01
1.95
F
1.27
G
0.38
0.43
0.48
H
6.0
L
18.75
en
22.0
M
0.33
0.38
0.43
N
Figure 4.
4.31
Ceramic Flat-16 mechanical drawings
G
F
D
H
9
16
A
N
L
8
1
H
E
B
Note:
12/24
M
C
0016030E
The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the
package. Connecting unused pins or metal lid to ground or to the power supply will not affect
the electrical characteristics.
Doc ID 17102 Rev 3
HCC4xxx
Package mechanical data
Table 7.
Ceramic DIL-16 package dimensions
mm
Dim
Min
2.10
2.71
a1
3.00
3.70
a2
0.63
B
1.82
b
0.40
0.45
0.50
b1
0.20
0.254
0.30
D
20.06
20.32
20.58
E
7.36
7.62
7.87
0.88
1.14
2.39
2.54
e1
17.65
17.78
17.90
e2
7.62
7.87
8.12
F
7.29
7.49
7.70
I
Note:
Max
A
e
Figure 5.
Typ
3.83
K
10.90
12.10
L
1.14
1.50
Ceramic DIL-16 package drawings
The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the
package. Connecting unused pins or metal lid to ground or to the power supply will not affect
the electrical characteristics.
Doc ID 17102 Rev 3
13/24
Package mechanical data
Table 8.
HCC4xxx
Ceramic Flat-24 package dimensions
mm
Dim
Min
Typ
Max
A
10.70
11.00
11.30
B
15.30
15.49
15.70
C
1.45
D
0.23
0.254
0.30
E
13.84
13.97
14.10
F
1.22
1.27
1.32
G
0.45
0.508
0.55
H
7.25
8.25
L
25.00
28.00
M
0.45
N
Figure 6.
Note:
14/24
1.90
0.508
0.55
7.01
Ceramic Flat-24 package drawings
The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the
package. Connecting unused pins or metal lid to ground or to the power supply will not affect
the electrical characteristics.
Doc ID 17102 Rev 3
HCC4xxx
Package mechanical data
Table 9.
Ceramic DIL-24 package dimensions
mm
Dim
Figure 7.
Min
Typ
Max
A
2.159
1.931
2.387
a1
1.270
1.016
1.524
a2
0.307
0.274
0.340
B
1.270
b1
0.457
0.407
0.507
b2
.254
0.229
0.304
C
2.466
2.205
2.727
D
30.48
30.17
30.78
E
15.24
14.98
15.49
e
2.540
2.410
2.670
e3
27.94
27.81
28.06
F
15.11
14.85
15.36
K
12.80
12.60
13.00
K1
12.80
12.60
13.00
L
3.300
3.000
3.800
Ceramic DIL-24 package drawings
0016179I
Note:
The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the
package. Connecting unused pins or metal lid to ground or to the power supply will not affect
the electrical characteristics.
Doc ID 17102 Rev 3
15/24
Order codes
Table 10.
Ordering information
Order codes
16/24
5
Doc ID 17102 Rev 3
Order code
ESCC detailed
specification
HCC4001BK
9201/041/01 or 02
Flat-14
920104101 or 02
0.70
Y
HCC4001BD
9201/041/03 or 04
DIL-14
920104103 or 04
2.20
-
HCC4002BK
9201/042/01 or 02
Flat-14
920104201 or 02
0.70
-
HCC4002BD
9201/042/03 or 04
DIL-14
920104203 or 04
2.20
-
HCC4008BK
9202/039/01 or 02
Flat-16
920203901 or 02
0.70
-
HCC4008BD
9202/039/08 or 09
DIL-16
920203908 or 09
2.20
-
HCC4011BK
9201/043/01 or 02
Flat-14
920104301 or 02
0.70
Y
HCC4011BD
9201/043/03 or 04
DIL-14
920104303 or 04
2.20
-
HCC4012BK
9201/044/01 or 02
Flat-14
920104401 or 02
0.70
-
HCC4012BD
9201/044/03 or 04
DIL-14
920104403 or 04
2.20
-
HCC4013BK
9203/023/01 or 02
920302301 or 02
0.70
Y
Quality level
Comment
Package
Lead finish
Flat-14
ESCC flight
Specify ESCC variant number in PO
Marking
Mass
EPPL
(g)
Gold or solder dip
Packing
Strip pack
9203/023/03 or 04
DIL-14
920302303 or 04
2.20
-
HCC4014BK
9306/014/01 or 02
Flat-16
930601401 or 02
0.70
Y
HCC4014BD
9306/014/08 or 09
DIL-16
930601408 or 09
2.20
-
HCC4015BK
9306/015/01 or 02
Flat-16
930601501 or 02
0.70
Y
HCC4015BD
9306/015/08 or 09
DIL-16
930601508 or 09
2.20
-
HCC4016BK
9202/050/01 or 02
Flat-14
920205001 or 02
0.70
-
HCC4016BD
9202/050/03 or 04
DIL-14
920205003 or 04
2.20
-
HCC4017BK
9204/020/01 or 02
Flat-16
920402001 or 02
0.70
Y
HCC4017BD
9204/020/08 or 09
DIL-16
920402008 or 09
2.20
-
HCC4018BK
9204/021/01 or 02
Flat-16
920402101 or 02
0.70
-
HCC4018BD
9204/021/08 or 09
DIL-16
920402108 or 09
2.20
-
HCC4xxx
HCC4013BD
Ordering information (continued)
Doc ID 17102 Rev 3
ESCC detailed
specification
HCC4019BK
9202/051/01 or 02
Flat-16
920205101 or 02
0.70
Y
HCC4019BD
9202/051/08 or 09
DIL-16
920205108 or 09
2.20
-
HCC4020BK
9204/022/01 or 02
Flat-16
920402201 or 02
0.70
Y
HCC4020BD
9204/022/08 or 09
DIL-16
920402208 or 09
2.20
-
HCC4021BK
9306/016/01 or 02
Flat-16
930601601 or 02
0.70
Y
HCC4021BD
9306/016/08 or 09
DIL-16
930601608 or 09
2.20
-
HCC4022BK
9204/023/01 or 02
Flat-16
920402301 or 02
0.70
-
HCC4022BD
9204/023/08 or 09
DIL-16
920402308 or 09
2.20
-
HCC4023BK
9201/045/01 or 02
Flat-14
920104501 or 02
0.70
Y
HCC4023BD
9201/045/03 or 04
DIL-14
920104503 or 04
2.20
-
HCC4024BK
9204/024/01 or 02
Flat-14
920402401 or 02
0.70
Y
HCC4024BD
9204/024/03 or 04
DIL-14
920402403 or 04
2.20
-
HCC4025BK
9201/046/01 or 02
Flat-14
Gold or solder dip 920104601 or 02
0.70
-
HCC4025BD
9201/046/03 or 04
DIL-14
920104603 or 04
2.20
-
HCC4027BK
9203/022/01 or 02
Flat-16
920302201 or 02
0.70
Y
HCC4027BD
9203/022/08 or 09
DIL-16
920302208 or 09
2.20
-
HCC4028BK
9205/010/01 or 02
Flat-16
920501001 or 02
0.70
Y
HCC4028BD
9205/010/08 or 09
DIL-16
920501008 or 09
2.20
-
HCC4029BK
9204/025/01 or 02
Flat-16
920402501 or 02
0.70
Y
HCC4029BD
9204/025/08 or 09
DIL-16
920402508 or 09
2.20
-
HCC4030BK
9201/047/01 or 02
Flat-14
920104701 or 02
0.70
Y
HCC4030BD
9201/047/03 or 04
DIL-14
920104703 or 04
2.20
-
HCC4034BK
9306/025/01 or 02
Flat-24
930602501 or 02
1.70
-
HCC4034BD
9306/025/03 or 04
DIL-24
930602503 or 04
5.20
-
HCC4035BK
9306/018/01 or 02
Flat-16
930601801 or 02
0.70
Y
Quality level
ESCC flight
Comment
Specify ESCC variant number in PO
Package
Lead finish
Marking
Mass
EPPL
(g)
Packing
Strip pack
Order codes
17/24
Order code
HCC4xxx
Table 10.
Ordering information (continued)
Order code
ESCC detailed
specification
HCC4035BD
9306/018/08 or 09
DIL-16
930601808 or 09
2.20
-
HCC4040BK
9204/026/01 or 02
Flat-16
920402601 or 02
0.70
Y
HCC4040BD
9204/026/08 or 09
DIL-16
920402608 or 09
2.20
-
HCC4041UBK 9202/040/01 or 02
Flat-14
920204001 or 02
0.70
-
HCC4041UBD 9202/040/03 or 04
DIL-14
920204003 or 04
2.20
-
Quality level
Comment
Package
Lead finish
Marking
Mass
EPPL
(g)
Doc ID 17102 Rev 3
HCC4042BK
9202/041/01 or 02
Flat-16
920204101 or 02
0.70
-
HCC4042BD
9202/041/08 or 09
DIL-16
920204108 or 09
2.20
-
HCC4043BK
9202/042/01 or 02
Flat-16
920204201 or 02
0.70
-
HCC4043BD
9202/042/08 or 09
DIL-16
920204208 or 09
2.20
-
HCC4044BK
9202/043/01 or 02
Flat-16
920204301 or 02
0.70
-
HCC4044BD
9202/043/08 or 09
DIL-16
920204308 or 09
2.20
-
HCC4046BK
9202/044/01 or 02
Flat-16
920204401 or 02
0.70
-
HCC4046BD
9202/044/08 or 09
DIL-16
Gold or solder dip 920204408 or 09
2.20
-
HCC4047BK
9207/003/01 or 02
Flat-14
920700301 or 02
0.70
Y
HCC4047BD
9207/003/03 or 04
DIL-14
920700303 or 04
2.20
-
HCC4049UBK 9202/045/01 or 02
Flat-16
920204501 or 02
0.70
Y
HCC4049UBD 9202/045/08 or 09
DIL-16
920204508 or 09
2.20
-
ESCC flight
Specify ESCC variant number in PO
9202/046/01 or 02
Flat-16
920204601 or 02
0.70
Y
HCC4050BD
9202/046/08 or 09
DIL-16
920204608 or 09
2.20
-
HCC4051BK
9202/047/01 or 02
Flat-16
920204701 or 02
0.70
Y
HCC4051BD
9202/047/08 or 09
DIL-16
920204708 or 09
2.20
-
HCC4052BK
9202/048/01 or 02
Flat-16
920204801 or 02
0.70
-
HCC4052BD
9202/048/08 or 09
DIL-16
920204808 or 09
2.20
-
HCC4053BK
9202/049/01 or 02
Flat-16
920204901 or 02
0.70
-
HCC4053BD
9202/049/08 or 09
DIL-16
920204908 or 09
2.20
-
Strip pack
HCC4xxx
HCC4050BK
Packing
Order codes
18/24
Table 10.
Ordering information (continued)
Doc ID 17102 Rev 3
Order code
ESCC detailed
specification
HCC4060BK
9204/052/01 or 02
Flat-16
920405201 or 02
0.70
-
HCC4060BD
9204/052/08 or 09
DIL-16
920405208 or 09
2.20
-
HCC4063BK
9209/001/01 or 02
Flat-16
920900101 or 02
0.70
Y
HCC4063BD
9209/001/08 or 09
DIL-16
920900108 or 09
2.20
-
HCC4066BK
9408/005/01 or 02
Flat-14
940800501 or 02
0.70
Y
HCC4066BD
9408/005/03 or 04
DIL-14
940800503 or 04
2.20
-
HCC4067BK
9408/009/01 or 02
Flat-24
940800901 or 02
1.70
-
HCC4067BD
9408/009/03 or 04
DIL-24
940800903 or 04
5.20
-
HCC4068BK
9201/061/01 or 02
Flat-14
920106101 or 02
0.70
-
HCC4068BD
9201/061/03 or 04
DIL-14
920106103 or 04
2.20
-
HCC4069UBK 9401/010/01 or 02
Flat-14
940101001 or 02
0.70
Y
HCC4069UBD 9401/010/03 or 04
DIL-14
940101003 or 04
2.20
-
Flat-14
Gold or solder dip 920104801 or 02
0.70
-
Quality level
ESCC flight
Comment
Specify ESCC variant number in PO
Package
Lead finish
Marking
Mass
EPPL
(g)
9201/048/01 or 02
HCC4070BD
9201/048/03 or 04
DIL-14
920104803 or 04
2.20
-
HCC4071BK
9201/063/01 or 02
Flat-14
920106301 or 02
0.70
Y
HCC4071BD
9201/063/03 or 04
DIL-14
920106303 or 04
2.20
-
HCC4072BK
9201/082/01 or 02
Flat-14
920108201 or 02
0.70
-
HCC4072BD
9201/082/03 or 04
DIL-14
920108203 or 04
2.20
-
HCC4073BK
9201/064/01 or 02
Flat-14
920106401 or 02
0.70
Y
HCC4073BD
9201/064/03 or 04
DIL-14
920106403 or 04
2.20
-
HCC4075BK
9201/065/01 or 02
Flat-14
920106501 or 02
0.70
-
HCC4075BD
9201/065/03 or 04
DIL-14
920106503 or 04
2.20
-
HCC4076BK
9306/022/01 or 02
Flat-16
930602201 or 02
0.70
Y
HCC4076BD
9306/022/08 or 09
DIL-16
930602208 or 09
2.20
-
HCC4077BK
9201/055/01 or 02
Flat-14
920105501 or 02
0.70
-
Strip pack
Order codes
19/24
HCC4070BK
Packing
HCC4xxx
Table 10.
Ordering information (continued)
Doc ID 17102 Rev 3
ESCC detailed
specification
HCC4077BD
9201/055/03 or 04
DIL-14
920105503 or 04
2.20
-
HCC4078BK
9201/062/01 or 02
Flat-14
920106201 or 02
0.70
-
HCC4078BD
9201/062/03 or 04
DIL-14
920106203 or 04
2.20
-
HCC4081BK
9201/052/01 or 02
Flat-14
920105201 or 02
0.70
Y
HCC4081BD
9201/052/03 or 04
DIL-14
920105203 or 04
2.20
-
HCC4082BK
9201/066/01 or 02
Flat-14
920106601 or 02
0.70
-
HCC4082BD
9201/066/03 or 04
DIL-14
920106603 or 04
2.20
-
HCC4093BK
9409/002/01 or 02
Flat-14
940900201 or 02
0.70
Y
HCC4093BD
9409/002/03 or 04
DIL-14
940900203 or 04
2.20
-
HCC4094BK
9306/026/01 or 02
Flat-16
930602601 or 02
0.70
Y
HCC4094BD
9306/026/08 or 09
DIL-16
930602608 or 09
2.20
-
HCC4098BK
9206/003/01 or 02
Flat-16
Gold or solder dip 920600301 or 02
0.70
Y
HCC4098BD
9206/003/08 or 09
DIL-16
920600308 or 09
2.20
-
HCC4099BK
9202/058/01 or 02
Flat-16
920205801 or 02
0.70
Y
HCC4099BD
9202/058/08 or 09
DIL-16
920205808 or 09
2.20
-
HCC40103BK 9204/036/01 or 02
Flat-16
920403601 or 02
0.70
Y
HCC40103BD 9204/036/08 or 09
DIL-16
920403608 or 09
2.20
-
HCC40106BK 9409/005/01 or 02
Flat-14
940900501 or 02
0.70
Y
HCC40106BD 9409/005/03 or 04
DIL-14
940900503 or 04
2.20
-
HCC40107BK 9401/013/01 or 02
Flat-14
940101301 or 02
0.70
Y
HCC40107BD 9401/013/03 or 04
DIL-14
940101303 or 04
2.20
-
HCC40109BK 9407/003/01 or 02
Flat-16
940700301 or 02
0.70
Y
HCC40109BD 9407/003/08 or 09
DIL-16
940700308 or 09
2.20
-
Quality level
ESCC flight
Comment
Specify ESCC variant number in PO
Package
Lead finish
Marking
Mass
EPPL
(g)
Packing
Strip pack
HCC4xxx
Order code
Order codes
20/24
Table 10.
Order code
Ordering information (continued)
ESCC detailed
specification
Quality level
Comment
Package
Lead finish
Marking
Mass
EPPL
(g)
HCC40161BK 9204/054/01 or 02
Flat-16
920405401 or 02
0.70
Y
HCC40161BD 9204/054/08 or 09
DIL-16
920405408 or 09
2.20
-
HCC40174BK 9203/038/01 or 02
Flat-16
920303801 or 02
0.70
Y
HCC40174BD 9203/038/08 or 09
DIL-16
920303808 or 09
2.20
-
HCC40193BK 9204/041/01 or 02
Flat-16
920404101 or 02
0.70
-
HCC40193BD 9204/041/08 or 09
DIL-16
920404108 or 09
2.20
-
Doc ID 17102 Rev 3
9401/006/01 or 02
Flat-16
940100601 or 02
0.70
Y
HCC4502BD
9401/006/08 or 09
DIL-16
940100608 or 09
2.20
-
HCC4503BK
9401/030/01 or 02
Flat-16
940103001 or 02
0.70
Y
HCC4503BD
9401/030/08 or 09
DIL-16
940103008 or 09
2.20
-
HCC4508BK
9202/063/01 or 02
Flat-24
920206301 or 02
1.70
Y
HCC4508BD
9202/063/03 or 04
DIL-24
920206303 or 04
5.20
-
HCC4512BK
9408/006/01 or 02
Flat-16
Gold or solder dip 940800601 or 02
0.70
Y
HCC4512BD
9408/006/08 or 09
DIL-16
940800608 or 09
2.20
-
HCC4514BK
9408/012/01 or 02
Flat-24
940801201 or 02
1.70
-
HCC4514BD
9408/012/03 or 04
DIL-24
940801203 or 04
5.20
-
HCC4515BK
9205/011/01 or 02
Flat-24
920501101 or 02
1.70
-
HCC4515BD
9205/011/03 or 04
DIL-24
920501103 or 04
5.20
-
HCC4516BK
9204/045/01 or 02
Flat-16
920404501 or 02
0.70
-
HCC4516BD
9204/045/08 or 09
DIL-16
920404508 or 09
2.20
-
HCC4520BK
9204/028/01 or 02
Flat-16
920402801 or 02
0.70
-
HCC4520BD
9204/028/08 or 09
DIL-16
920402808 or 09
2.20
-
HCC4532BK
9202/065/01 or 02
Flat-16
920206501 or 02
0.70
-
HCC4532BD
9202/065/08 or 09
DIL-16
920206508 or 09
2.20
-
HCC4538BK
9207/007/01 or 02
Flat-16
920700701 or 02
0.70
-
ESCC flight
Specify ESCC variant number in PO
Strip pack
Order codes
21/24
HCC4502BK
Packing
HCC4xxx
Table 10.
Ordering information (continued)
Order code
ESCC detailed
specification
HCC4538BD
9207/007/08 or 09
DIL-16
920700708 or 09
2.20
-
HCC4555BK
9408/011/01 or 02
Flat-16
940801101 or 02
0.70
Y
HCC4555BD
9408/011/08 or 09
DIL-16
Gold or solder dip 940801108 or 09
2.20
-
HCC4556BK
9408/025/01 or 02
Flat-16
940802501 or 02
0.70
-
HCC4556BD
9408/025/08 or 09
DIL-16
940802508 or 09
2.20
-
Note:
Quality level
ESCC flight
Comment
Specify ESCC variant number in PO
Package
Lead finish
Marking
Mass
EPPL
(g)
Packing
Order codes
22/24
Table 10.
Strip pack
Contact ST sales office for information about the specific conditions for other CMOS4000 part numbers and product in die form
Doc ID 17102 Rev 3
HCC4xxx
HCC4xxx
6
Revision history
Revision history
Table 11.
Document revision history
Date
Revision
Changes
24-Mar-2010
1
First release
29-Mar-2010
2
Updated coverpage description
10-Aug-2011
3
Added Note: on page 10, Note: on page 11, Note: on page 12, Note:
on page 13, Note: on page 14, Note: on page 15 and in the “Pin
connections” diagram on the coverpage.
Doc ID 17102 Rev 3
23/24
HCC4xxx
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2011 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
24/24
Doc ID 17102 Rev 3