SPC564A80CAL176 SPC564A70CAL176 SPC564Axx microcontroller family calibration and emulation system Data brief Features ■ Support for LQFP176 MCU production package allowing calibration systems to be built without requiring modifications to the standard production system housing ■ 2 MB static RAM organized as 512 K words by 32 bits ■ 32-bit multiplexed Calibration bus configuration; ■ Support for Nexus-based debug tools even if application PCB does not include Nexus connector ■ Nexus functionality with 12 Message Data Out (MDO) signals ■ Support for full-feature calibration tools via availability of comprehensive set of device signals available on the connectors. ■ ERNI 154819 connector optimized for calibration ■ High speed CAN transceiver with signals protection ■ Specifications: ■ Board size 36 x 64.5 mm ■ The SPC564A70CALxx and SPC564A80CALxx is a calibration and emulation system supporting the STMicroelectronics® SPC564AXX family of automotive microprocessors. The Calibration Adapter is designed to substitute the QFP device on an ECU version used during engine calibration. The complete system consists of a SPC564A70CAL176 board or a SPC564A80CAL176 and a POLYPOD-TQ176 Poly-Pod which plugs directly into the motherboard. The Calibration Adapter can also be used as emulation board as the Nexus trace port on CSP496 allows using the pins for application purpose. Target connector compatible with TQPACK176SD July 2012 Description Doc ID 023384 Rev 1 For further information contact your local STMicroelectronics sales office. 1/6 www.st.com 1 Order codes 1 SPC564A80CAL176 ,SPC564A70CAL176 Order codes Table 1. Device summary Order code Reference SPC564A70CAL176 Vertical base board for SPC564A70xx in QFP176 target package. SPC564A80CAL176 Vertical base board for SPC564A80xx in QFP176 target package. POLYPOD-TQ176 2/6 TQ-PolyPod for QFP176 targets. Doc ID 023384 Rev 1 SPC564A80CAL176 ,SPC564A70CAL176 2 System requirements System requirements ● "Windows PC (XP, Vista, 7) Doc ID 023384 Rev 1 3/6 Calibration software 3 Calibration software ● 4/6 SPC564A80CAL176 ,SPC564A70CAL176 "ETAS INCA Doc ID 023384 Rev 1 SPC564A80CAL176 ,SPC564A70CAL176 4 Revision history Revision history Table 2. Document revision history Date Revision 16-July-2012 1 Changes Initial release. Doc ID 023384 Rev 1 5/6 SPC564A80CAL176 ,SPC564A70CAL176 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2012 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 6/6 Doc ID 023384 Rev 1