STEVAL-PCC009V3 S-Touch® product family interface demonstration board based on the STM32 Data brief Features ■ Generic interface for various S-Touch® product family demonstration boards ■ DFU capability for reprogramming ■ 10-pin interface for serial communication ■ USB powered ■ RoHS compliant Description The STEVAL-PCC009V3 is a demonstration motherboard based on the STM32 microcontroller, used as the generic interface for various S-Touch® product family demonstration daughterboards (e.g. STEVAL-ICB002V1 based on the STMPE821). STEVAL-PCC009V3 Power to the STEVAL-PCC009V3 is provided by a USB mini B-type connector, while power to the capacitive touch daughterboards is supplied by the STEVAL-PCC009V3 via the 10-pin connector. The STEVAL-PCC009V3 is also able to work in DFU mode to reprogram the STM32 microcontroller. September 2011 Doc ID 022231 Rev 1 For further information contact your local STMicroelectronics sales office. 1/7 www.st.com 7 Schematic diagrams 1 STEVAL-PCC009V3 Schematic diagrams Figure 1. Microcontroller AM10138V1 2/7 Doc ID 022231 Rev 1 1 2 3 4 RN3 EXB-38V472JV 13 14 15 16 I/OVCC1 VCC VL I/OVL1 NC VCC VL NC Doc ID 022231 Rev 1 8 7 6 5 V_CON 3V3 6 5 4 PB11_I2C2_SDA_DB GND PB1_TIM3_CH4_DB RN2 8 7 6 5 EXB-38V472JV 1 2 3 4 PB11_I2C2_SDA_DB PB13_SPI2_SCK_DB PB12_SPI2_NSS_DB PB1_TIM3_CH4_DB PB10_I2C2_SCL_DB PB14_SPI2_MISO_DB PB15_SPI2_MOSI_DB PB0_TIM3_CH3_DB 6 5 4 6 5 4 1 2 3 4 I/OVL2 OE I/OVL3 I/OVL4 U10 ST2349 PB13_SPI2_SCK_DB GND PB12_SPI2_NSS_DB PB13_SPI2_SCK 3V3 PB15_SPI2_MOSI PB12_SPI2_NSS PB14_SPI2_MISO ESDALC6V1M6 1 2 3 U8 5 PB14_SPI2_MISO_DB1 GND 2 PB15_SPI2_MOSI_DB 3 8 7 ESDALC6V1M6 6 5 4 8 7 6 5 100nF C3 8 7 6 5 1 2 3 RN1 EXB-38V472JV 1 2 3 4 PB11_I2C2_SDA_DB V_CON PB13_SPI2_SCK_DB PB12_SPI2_NSS_DB PB1_TIM3_CH4_DB NC VCC VL NC U4 PB11_I2C2_SDA PB13_SPI2_SCK PB12_SPI2_NSS PB1_TIM3_CH4 PB10_I2C2_SCL PB14_SPI2_MISO PB15_SPI2_MOSI PB0_TIM3_CH3 2 4 6 8 10 SPI_CON10A 1 3 5 7 9 RN5 EXB-38V472JV I/OVCC1 VCC VL I/OVL1 1 2 3 PB0_TIM3_CH3_DB PB1_TIM3_CH4_DB PB11_I2C2_SDA_DB PB10_I2C2_SCL_DB GND PB14_SPI2_MISO_DB PB15_SPI2_MOSI_DB PB0_TIM3_CH3_DB J2 C17 0.1uF 15 16 PB10_I2C2_SCL_DB GND PB0_TIM3_CH3_DB V_CON 3V3 12 11 10 9 1 2 3 4 13 14 ST2349 I/OVCC2 GND I/OVCC3 I/OVCC4 RN4 EXB-38V472JV 3V3 V_CON 3V3 I/OVL2 OE I/OVL3 I/OVL4 U5 V_CON C8 1uF PB10_I2C2_SCl_DB C7 0.1uF I/OVCC2 GND I/OVCC3 I/OVCC4 12 11 10 9 C18 0.1uF V_CON PB15_SPI2_MOSI_DB PB12_SPI2_NSS_DB PB13_SPI2_SCK_DB PB14_SPI2_MISO_DB C19 1uF 1 2 3 4 PB11_I2C2_SDA 1 3V3 2 PB0_TIM3_CH3 3 PB1_TIM3_CH4 4 PB10_I2C2_SCL C6 0.1uF 1 2 3 4 6 RN6 EXB-38V472JV Figure 2. 3V3 STEVAL-PCC009V3 Schematic diagrams Synchronous interface 8 7 6 5 V_CON 3V3 8 7 6 5 8 7 6 5 AM10139V1 3/7 Schematic diagrams Figure 3. STEVAL-PCC009V3 Extension board interface J4 PB6_I2C1_SCL PB5_I2C1_SMBAI PB8_TIM4_CH3 GND PA2_TIM2_CH3_USART2_TX GND PA4_USART2_CK PA1_TIM2_CH2_USART2_RTS PE1 PE3 PE8 PE10 PE12 PE14 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 GND PB7_I2C1_SDA GND PB9_TIM4_CH4 GND PA3_TIM2_CH4_USART2_RX V_CON PA0_WKUP_USART2_CTS PE0 PE2 PE4 PE9 PE11 PE13 PE15 U6 PA2_TIM2_CH3_USART2_TX 1 GND 2 PA4_USART2_CK 3 C16 100nF 1 6 2 5 4 3 ESDALC6V1M6 PA3_TIM2_CH4_USART2_RX GND PE0 6 5 4 U7 PA0_WKUP_USART2_CTS GND PE1 1 2 3 GENERIC_30PIN 1 6 5 2 3 4 ESDALC6V1M6 6 5 4 PA1_TIM2_CH2_USART2_RTS GND PE2 J7 PD8 PD10 PD12 PD14 GND PC6 PC8 GND PA9 PC10 PC12 PD0 PD2 PD4 PD6 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 PD9 PD11 PD13 PD15 V_CON PC7 PC9 PA8 PA10 PC11 PC13_TAMPER PD1 PD3 PD5 PD7 C26 100nF GENERIC_30PIN Figure 4. AM10140V1 MicroSD 3V3 C25 100nF C24 4.7uF R21 (DNM) R20 100k CD R22 500 12 2 3 5 7 8 1 VSS2 RSV RSV VSS VSS COM 11 10 CS DATA_IN SCLK DATA_OUT 6 9 VDD MICROSD_CD 4 J8 MICROSD_CS PA7_SPI1_MOSI PA5_SPI1_SCK PA6_SPI1_MISO R23 R24 100k 100k MMC_CON AM10141V1 4/7 Doc ID 022231 Rev 1 STEVAL-PCC009V3 Schematic diagrams Figure 5. Analog interface J1 AGND AGND PE5 VDDA PC0_ADC12_IN10 PC1_ADC12_IN11 PC2_ADC12_IN12 PE6 PC3_ADC12_IN13 2 4 6 8 10 1 3 5 7 9 U1 PE5 1 PE6 2 ANALOG_CONN 1 3 2 AGND 3 ESDALC6V1M3 U3 PC0_ADC12_IN10 AGND PC1_ADC12_IN11 1 2 3 1 2 3 6 5 4 PC3_ADC12_IN13 AGND PC2_ADC12_IN12 6 5 4 ESDALC6V1M6 AM10142V1 Figure 6. J5 1 2 3 4 5 6 7 8 9 CON9 5V0 Power supply C28 4.7uF R18 1k5 U9 1 2 3 1 2 3 6 5 4 6 5 4 USBDM 3V3 USBDP R26 1k5 USBLC6-2P6 C20 4.7nF R19 1M J6 R27 1k5 3V3 PE7 3V3 D1 POWER 1 2 3 4 5V0 R25 500 C22 100nF 3V3 V_CON 5V0 CON3 GND VOUT VOUT VIN GND 3V3 U11 GND 3V3 C23 4.7nF 1 2 3 Q1 2STR1215 NC VOUT VOUT NC 8 7 6 5 3V3 C21 10uF LD1117D33TR AM10143V1 JTAG interface 3V3 3V3 3V3 8 7 6 5 R14 10k J3 1 3 5 7 9 11 13 15 17 19 JTAG_20PIN PB4_NTRST PA15_TDI PA13_TMS PA14_TCK R15 10k R16 10k R17 10k RN7 RESAR_IS_4/SM_10K 1 2 3 4 2 4 6 8 10 12 14 16 18 20 PB3_TDO RESET# PB4_NTRST PA15_TDI PA13_TMS PA14_TCK Figure 7. AM10144V1 Doc ID 022231 Rev 1 5/7 Revision history 2 STEVAL-PCC009V3 Revision history Table 1. 6/7 Document revision history Date Revision 15-Sep-2011 1 Changes Initial release. Doc ID 022231 Rev 1 STEVAL-PCC009V3 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 022231 Rev 1 7/7