SR002 - SR010 creat by art 0.5AMP. Schottky Barrier Rectifiers DO-41 Features Low power loss, High efficiency. High current capability, Low VF. High reliability High surge current capability. Epitaxial construction. Guard-ring for transient protection. For use in low voltage, high frequency inverter, free wheeling, and polarity protection application Green compound with suffix "G" on packing code & prefix "G" on datecode. Mechanical Data Cases: DO-41 molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Pure tin plated, lead free, solderable per MIL-STD-202, Method 208 guaranteed Polarity:Color band denotes cathode High temperature soldering guaranteed: 260℃/10 seconds /.375", (9.5mm) lead lengths at 5 lbs, (2.3kg) tension Weight: 0.33 grams Ordering Information (example) Part No. Package Packing INNER TAPE Packing code Packing code (Green) SR002 DO-41 3K / AMMO box 52mm A0 A0G Maximum Ratings and Electrical Characteristics Rating at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Maximum Recurrent Peak Reverse Voltage VRRM SR 002 20 Maximum RMS Voltage VRMS 14 21 28 35 42 63 70 V Maximum DC Blocking Voltage VDC 20 30 40 50 60 90 100 V Maximum Average Forward Rectified Current IF(AV) 0.5 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) IFSM 30 A Type Number Maximum Instantaneous Forward Voltage (Note 1) @ 0.5A Maximum D.C. Reverse Current at Rated DC Blocking Voltage @ TA=25 ℃ @ TA=100 ℃ @TA=125℃ Typical Junction Capacitance (Note 2) Typical Thermal Resistance Operating Junction Temperature Range Storage Temperature Range Symbol VF IR SR 003 30 SR 004 40 SR 005 50 SR 006 60 SR 009 90 SR 010 100 0.70 0.85 V 0.5 0.5 0.1 mA 10 5 - mA 2 mA 110 RθJA TJ TSTG V 0.55 Cj Units 80 65 50 - 65 to + 125 pF O - 65 to + 150 - 65 to + 150 Note1: Pulse Test with PW=300 usec, 1% Duty cycle Note2: Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C. Version:D12 C/W O C O C RATINGS AND CHARACTERISTIC CURVES (SR002 THRU SR010) FIG.1- FORWARD CURRENT DERATING CURVE FIG. 2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT AVERAGE FORWARD CURRENT (A) 0.8 50 0.6 40 CURRENT (A) SR005 - SR010 0.4 0.2 SR002 - SR004 30 20 10 0 0 0 20 40 60 80 100 120 140 1 160 10 100 NUMBER OF CYCLES AT 60 Hz LEAD TEMPERATURE (oC) FIG. 4- TYPICAL REVERSE CHARACTERISTICS 100 FIG. 3- TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT. (mA) INSTANTANEOUS FORWARD CURRENT (A) 100 SR005-SR006 SR002-SR004 10 SR009-SR010 1 TA=25oC Pulse Width=300μs 1% Duty Cycld 10 1 TA=75℃ 0.1 TA=25℃ 0.01 0.001 0.1 0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 0 2.1 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE.(%) FORWARD VOLTAGE (V) FIG. 5- TYPICAL JUNCTION CAPACITANCE FIG. 6- TYPICAL TRANSIENT THERMAL CHARACTERISTICS 100 TRANSIENT THERMAL IMPEDANCE (℃/W) 1000 JUNCTION CAPACITANCE (pF) TA=125℃ 10 SR002-SR004 100 SR005-SR010 10 0.1 1 10 REVERSE VOLTAGE (V) 100 1 0.1 0.01 0.1 1 10 100 PILSE DURATION, (sec) Version:D12 Ordering information Part No. SR0xx Package Packing INNER TAPE Packing code Packing code (Green) DO-41 3K / AMMO box 52mm A0 A0G DO-41 3K / AMMO box 26mm A1 A1G DO-41 5K / 13" Reel 52mm R0 R0G DO-41 5K / 13" Reel 52mm R1 R1G B0 B0G 1K / Bulk packing DO-41 Note: "xx" is Device Code from "02" thru "10". AXIAL LEAD TAPING SPECIFICATIONS Outline DO-41 DO-41 A ±0.5 5 5 B ±1.5 26 52.4 Z MAX 1.2 1.2 T ±0.4 6 6 E ∣L1-L2∣ MAX MAX 0.8 1 0.8 1 D 330 330 Suggested Mounting Hole Rule Symbol A B C D Unit(mm) 5.1 0.8 3.0 1.2 D1 ±0.3 85.7 85.7 D0 ±0.4 16.6 16.6 Unit (mm) W ±1.0 76 76 Dimensions DIM. Marking Diagram P/N = Specific Device Code G = Green Compound YWW = Date Code Unit(mm) Unit(inch) Min Max Min Max A 2.00 2.70 0.079 0.106 B 0.71 0.86 0.028 0.034 C 25.40 - 1.000 - D 4.20 5.20 0.165 0.205 E 25.40 - 1.000 -