SR102 - SR115 CREAT BY ART 1.0AMP. Schottky Barrier Rectifiers DO-41 Features Low power loss, High efficiency High current capability, Low VF High reliability High surge current capability Epitaxial construction Guard-ring for transient protection For use in low voltage, high frequency inverter, free wheeling, and polarity protection application Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Cases: DO-41 molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Pure tin plated, lead free, solderable per MIL-STD-202, Method 208 guaranteed High temperature soldering guaranteed: 260℃/10s /.375", (9.5mm) lead lengths at 5 lbs, (2.3kg) tension Weight: 0.33 grams Ordering Information (example) Part No. Package Packing INNER TAPE Packing code Packing code (Green) SR102 DO-41 3K / AMMO box 52mm A0 A0G Maximum Ratings and Electrical Characteristics Rating at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Maximum Recurrent Peak Reverse Voltage VRRM SR 102 20 Maximum RMS Voltage VRMS 14 21 28 35 42 63 70 105 V Maximum DC Blocking Voltage VDC 20 30 40 50 60 90 100 150 V Maximum Average Forward Rectified Curren IF(AV) 1 A Peak Forward Surge Current, 8.3 ms Single Half Sinewave Superimposed on Rated Load (JEDEC method) IFSM 30 A Type Number Symbol Maximum Instantaneous Forward Voltage (Note 1) @1A Maximum Reverse Current @ Rated VR @ TA=25 ℃ @ TA=100 ℃ @ TA=125 ℃ Typical Junction Capacitance (Note 2) Typical Thermal Resistance Operating Junction Temperature Range Storage Temperature Range VF SR 103 30 SR 104 40 SR 105 50 SR 106 60 SR 109 90 0.55 0.70 0.85 0.5 IR 10 Cj 80 SR 110 100 TJ TSTG V V 0.1 5 - 65 28 mA 2 pF O 90 - 65 to + 125 Units 0.95 RθJA SR 115 150 - 65 to + 150 - 65 to + 150 Note1: Pulse Test with PW=300u sec, 1% Duty cycle Note2: Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C. Version:D12 C/W O C O C RATINGS AND CHARACTERISTIC CURVES (SR102 THRU SR115) FIG.1- FORWARD CURRENT DERATING CURVE FIG. 2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 50 PEAK FORWARD CURRENT (A) AVERAGE FORWARD CURRENT (A) 1.25 1 SR105 - SR115 0.75 0.5 SR102 - SR104 0.25 0 0 25 50 75 100 125 150 40 30 20 10 0 1 175 10 100 NUMBER OF CYCLES AT 60 Hz LEAD TEMPERATURE (oC) FIG. 4- TYPICAL REVERSE CHARACTERISTICS FIG. 3- TYPICAL FORWARD CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT. (mA) INSTANTANEOUS FORWARD CURRENT (A) 100 SR105-SR106 10 SR102-SR104 SR115 1 SR109-SR110 TA=25OC Pulse Width=300us 1% Duty Cycle 1 TA=75℃ 0.1 TA=25℃ 0.01 0.001 0.1 0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 0 2.1 FIG. 5 TYPICAL JUNCTION CAPACITANCE SR105-SR106 SR102-SR104 SR109-SR115 10 0.1 1 10 REVERSE VOLTAGE (V) 100 TRANSIENT THERMAL IMPEDANCE (℃/W) 100 1000 100 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE.(%) FORWARD VOLTAGE (V) JUNCTION CAPACITANCE (pF) TA=125℃ 10 FIG. 6 TYPICAL TRANSIENT THERMAL IMPEDANCE 10 1 0.1 0.01 0.1 1 10 T-PILSE DURATION(s) Version:D12 100 Ordering information Part No. SR10x Package Packing INNER TAPE Packing code Packing code (Green) DO-41 3K / AMMO box 52mm A0 A0G DO-41 3K / AMMO box 26mm A1 A1G DO-41 5K / 13" Reel 52mm R0 R0G DO-41 5K / 13" Reel 52mm R1 R1G DO-41 1K / Bulk packing B0 B0G Note: "xx" is Device Code from "02" thru "15". AXIAL LEAD TAPING SPECIFICATIONS Outline DO-41 DO-41 A ±0.5 5 5 B ±1.5 26 52.4 Z MAX 1.2 1.2 T ±0.4 6 6 E ∣L1-L2∣ MAX MAX 0.8 1 0.8 1 D 330 330 Suggested Mounting Hole Rule Symbol A B C D Unit(mm) 5.1 0.8 3.0 1.2 D1 ±0.3 85.7 85.7 D0 ±0.4 16.6 16.6 Unit (mm) W ±1.0 76 76 Dimensions DIM. Marking Diagram P/N = Specific Device Code G = Green Compound YWW = Date Code Unit(mm) Unit(inch) Min Max Min Max A 2.00 2.70 0.079 0.106 B 0.71 0.86 0.028 0.034 C 25.40 - 1.000 - D 4.20 5.20 0.165 0.205 E 25.40 - 1.000 -