UNISONIC TECHNOLOGIES CO., LTD BAV199 Preliminary DIODE DUAL SURFACE MOUNT LOW LEAKAGE DIODE 3 DESCRIPTION The UTC BAV199 is a dual surface mount diode providing the designers with extremely low leakage current. The UTC BAV199 is suitable for automatic insertion 1 2 SOT-23 FEATURES * Extremely Low Leakage Current ORDERING INFORMATION Ordering Number Lead Free Halogen Free BAV199L-AE3-R BAV199G-AE3-R Note: Pin Assignment: A: Anode K: Cathode Package SOT-23 Pin Assignment 1 2 3 K1 A2 A1K2 Packing Tape Reel MARKING www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., Ltd 1 of 2 QW-R601-037.a BAV199 Preliminary DIODE ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) PARAMETER Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage RATINGS UNIT 85 V 85 V 85 V 60 V Single diode 160 Forward Continuous Current IFM mA Double diode 140 Repetitive Peak Forward Current IFRM 500 mA @ t = 1.0μs 4.0 Non-Repetitive Peak Forward Surge IFSM A @ t = 1.0ms 1.0 Current @ t = 1.0s 0.5 Power Dissipation (Note 2) PD 250 mW Junction Temperature TJ -65~+150 °C Storage Temperature TSTG -65~+150 °C Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. 1. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Part mounted on FR-4 PC board with recommended pad layout SYMBOL VRRM VRWM VR VR(RMS) THERMAL DATA PARAMETER Thermal Resistance Junction to Ambient Air (Note 2) SYMBOL θJA RATINGS 500 UNIT °C/W ELECTRICAL CHARACTERISTICS (TA =25°C, unless otherwise specified.) PARAMETER Reverse Breakdown Voltage (Note 1) SYMBOL V(BR)R TEST CONDITIONS IR= 100μA IF= 1.0mA IF= 10mA Forward Voltage (Note 1) VF IF= 50mA IF= 150mA VR= 75V Leakage Current (Note 1) IR VR= 75V, TJ= 150°C Total Capacitance CT VR= 0, f = 1.0MHz IF= IR= 10mA, Irr = 0.1 x IR, Reverse Recovery Time trr RL= 100Ω Note: 1. Short duration test pulse to minimize self-heating effect. MIN 85 TYP MAX UNIT V 0.90 1.0 V 1.1 1.25 5.0 nA 80 2 pF 3.0 μs UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 2 QW-R601-037.a