BITECH BB1112B

BB1110TB, BB1110B, BB1110I
and BB2110DI DDR SDRAM
Terminator Networks
BB 1110 / 2110 Series
· 18 Bit SSTL_2 Termination Sets.
· Compliant to JEDEC Std. 8-9B.
· Superior High Frequency Performance.
· Minimal stray capacitance and inductance are achieved
by placing resistors and BGA termination on the same
side of ceramic substrate.
The device can be easily surface mounted using automatic Pick and Place equipment
·
Description
This “BB” family of networks is for terminating SSTL_2 Class I and Class II systems, such as DDR
SDRAM. These specialty networks employ solder balls for surface mount flip chip attachment. Their
unique construction yields extremely low capacitance and inductance parasitics making them ideal for
high-speed bus applications.
Electrical
Parameter (Maximum)
Resistance, Nominal
Absolute Tolerance
Temperature Coefficient of
Resistance
Interlead Capacitance, Maximum
Operation Temperature
Power Rating (per package)
Limit
Various
1
Units
Ω
%
200
ppm/°C
0.1
-55 to 125
1
pF
°C
watt
Schematic
xx denotes part number options. See ordering information for details.
General Note
TT electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT electronics’ own data and is considered accurate at time of going to print.
www.bitechnologies.com www.irctt.com www.welwyn-tt.com
© TT electronics plc
06.12
BB1110TB, BB1110B, BB1110I
and BB2110DI DDR SDRAM Terminator Networks
BB 1110 / 2110 Series
Dimensions (mm)
General Note
TT electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT electronics’ own data and is considered accurate at time of going to print.
www.bitechnologies.com www.irctt.com www.welwyn-tt.com
© TT electronics plc
06.12
BB1110TB, BB1110B, BB1110I
and BB2110DI DDR SDRAM Terminator Networks
BB 1110 / 2110 Series
Ordering Information
Part Number
Resister Number
Resister value (Ω)
Array
Pitch (mm)
Tape/Reel
Capacity 7”
Tape/Reel
Capacity 13”
BB1110TB
R1/R2
50/25
3X9
1.0
1000
4000
BB1111TB
R1/R2
25/22
3X9
1.0
1000
4000
BB1112TB
R1/R2
60/25
3X9
1.0
1000
4000
BB1113TB
R1/R2
60/60
3X9
1.0
1000
4000
BB1110B
R1
50
3X9
1.0
1000
4000
BB1111B
R1
100
3X9
1.0
1000
4000
BB1112B
R1
25
3X9
1.0
1000
4000
BB1110DI
R1
25
4X9
1.0
1000
4000
BB1111DI
R1
22
4X9
1.0
1000
4000
BB11112DI
R1
33
4X9
1.0
1000
4000
BB11113DI
R1
47
4X9
1.0
1000
4000
BB1110I
R1
25
3X9
1.0
1000
4000
Add 7 for 7-inch reel or 13 for 13-inch reel to part number.
Example:
BB1110B7 (1000 parts packaged in 7 inch reel)
BB1110B13 (4000 parts packaged in 13 inch reel)
Application Notes
Schematics per JEDEC Standard No. 8-9B.
BB1110B
BB2110DI
SSTL_2, Class I, symmetrically single parallel terminated output load, and series resistor
General Note
TT electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT electronics’ own data and is considered accurate at time of going to print.
www.bitechnologies.com www.irctt.com www.welwyn-tt.com
© TT electronics plc
06.12
BB1110TB, BB1110B, BB1110I
and BB2110DI DDR SDRAM Terminator Networks
BB 1110 / 2110 Series
BB1110B
BB1110B
SSTL_2, Class I, buffer with symmetrically double parallel terminated output load
BB1110B
BB1110TB
SSTL_2, Class II, symmetrically double parallel terminated output load with series resistor
General Note
TT electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT electronics’ own data and is considered accurate at time of going to print.
www.bitechnologies.com www.irctt.com www.welwyn-tt.com
© TT electronics plc
06.12