COILCRAFT 0806SQ

Document 617 -1
Square Air Core Inductors
• Excellent Q factors – up to 130
• Current handling as high as 4.4 Amps!
• 20 inductance values from 5.5 to 27 nH
• Flat top and bottom for reliable pick and place and mechanical
stability
• All values available in 2% tolerance
Designer’s Kit C424 contains 10 each of all 5% values;
Designer’s Kit C424-2 contains 10 each of all 2% values
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver over copper
Ambient temperature –40°C to +125°C with Irms current, +125°C
to +145°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF) 1 billion hours
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
SRFDCR
Inductance2 %
Q4 typ5max
Irms6
Part number1(nH) tol3 typ (GHz)(mOhm) (A)
0806SQ-5N5_L_5.5
0806SQ-6N0_L_6.0
0806SQ-8N9_L_8.9
0806SQ-12N_L_12.3
0806SQ-16N_L_15.7
0806SQ-19N_L_19.4
0807SQ-6N9_L_6.9
0807SQ-10N_L_10.2
0807SQ-11N_L_11.2
0807SQ-14N_L_13.7
0807SQ-17N_L_17.0
0807SQ-22N_L_22.0
0908SQ-8N1_L_8.1
0908SQ-12N_L_12.1
0908SQ-14N_L_14.7
0908SQ-17N_L_16.6
0908SQ-22N_L_21.5
0908SQ-23N_L_23.0
0908SQ-25N_L_25.0
0908SQ-27N_L_27.3
5,2 60
5,2 64
5,2 90
5,2 90
5,2 90
5,2 90
5,2100
5,2100
5,2 90
5,2100
5,2100
5,2100
5,2130
5,2130
5,2 90
5,2130
5,2130
5,2120
5,2130
5,2130
4.9
5.2
4.3
4.8
4.4
4.0
4.6
4.0
3.6
4.3
4.0
3.5
5.2
4.3
3.0
3.4
3.7
2.6
2.5
3.2
3.42.9
6.02.9
7.02.9
8.02.9
9.02.9
10.02.9
6.0 2.7
7.0 2.7
6.32.7
8.0 2.7
9.0 2.7
10.0 2.7
6.0 4.4
7.0 4.4
7.24.4
8.0 4.4
9.0 4.4
10.0 4.4
10.0 4.4
10.0 4.4
1. Please specify tolerance, termination and packaging codes:
0908SQ-27NGLC
Tolerance:G =2%, J = 5% (Table shows stock tolerances in bold.)
Termination:L =RoHS compliant tin-silver (96.5/3.5) over copper.
Special order, added cost:
T = RoHS tin-silver-copper (95.5/4/0.5) over copper
or S = non-RoHS tin-lead (63/37) over copper.
Packaging:C
=7″ machine-ready reel. EIA-481 embossed plastic
tape.
B=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D
=13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked.
2. Inductance measured at 400 MHz, 0.1 Vrms, 0 A using an Agilent/HP
4287A LCR meter or equivalent with a Coilcraft CCF1166 test fixture
and Coilcraft-provided correlation pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured at 400 MHz using an Agilent/HP 4291A impedance analyzer or equivalent.
5. SRF measured using an Agilent/HP 8753 network analyzer and a
Coilcraft SMD-D test fixture.
6. Current that causes a 20°C temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 617-1 Revised 06/26/13
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 617-2
Square Air Coil Inductors
Irms Derating
A
max
Strip
length
120
min
D
B
E
100
80
60
40
25°C
Percent of rated Irms
C
20
0
-40
-20
0
20
40
60
80
100
120
140 160
Ambient temperature (°C)
F
Recommended
Land Pattern
Packaging 2000/7″reel; 7500/13″ reel
Plastic tape: 12 mm wide, 0.254 mm thick, 4 mm pocket spacing
Part Weight Tape pocket
number
ABC
D
E
F
(mg)
depth (mm)
0806SQ-5N5 1,346 ±0,102 1,829 ±0,254 1,397 ±0,102 0,962 2,6 0,51
9,9
1,42
0806SQ-6N0 1,295 ±0,102 1,829 ±0,254 1,397 ±0,102 1,02 2,6 0,51
8,5
1,42
0806SQ-8N9 1,626 ±0,152 1,829 ±0,254 1,397 ±0,102 1,32 2,6 0,51 10,8
1,55
0806SQ-12N 1,930 ±0,152 1,829 ±0,254 1,397 ±0,102 1,63 2,6 0,51 13,6
1,52
0806SQ-16N 2,286 ±0,152 1,829 ±0,254 1,397 ±0,102 1,96 2,6 0,51 16,1
1,50
0806SQ-19N 2,591 ±0,152 1,829 ±0,254 1,397 ±0,102 2,29 2,6 0,51 18,7
1,55
0807SQ-6N9
0807SQ-10N
0807SQ-11N
0807SQ-14N
0807SQ-17N
0807SQ-22N
1,295 ±0,102
1,626 ±0,152
1,549 ±0,152
1,930 ±0,152
2,286 ±0,152
2,591 ±0,152
1,829 ±0,254
1,829 ±0,254
1,829 ±0,254
1,829 ±0,254
1,829 ±0,254
1,829 ±0,254
1,524 ±0,254
1,524 ±0,254
1,524 ±0,254
1,524 ±0,254
1,524 ±0,254
1,524 ±0,254
1,02
1,32
1,24
1,63
1,96
2,29
2,6
2,6
2,6
2,6
2,6
2,6
0,51
0,51
0,51
0,51
0,51
0,51
9,1
11,5
11,5
14,0
16,8
19,4
1,60
1,57
1,55
1,60
1,68
1,68
0908SQ-8N1 1,473 ±0,152
0908SQ-12N 1,854 ±0,152
0908SQ-14N 1,549 ±0,152
0908SQ-17N 2,210 ±0,152
0908SQ-22N 2,565 ±0,152
0908SQ-23N 2,235 ±0,152
0908SQ-25N 2,972 ±0,152
0908SQ-27N 2,972 ±0,152
All dimensions are in mm.
2,134 ±0,152
2,134 ±0,152
2,134 ±0,152
2,134 ±0,152
2,134 ±0,152
2,134 ±0,152
2,134 ±0,152
2,134 ±0,152
1,829 ±0,203
1,829 ±0,203
1,829 ±0,203
1,829 ±0,203
1,829 ±0,203
1,829 ±0,203
1,829 ±0,203
1,829 ±0,203
1,12
1,45
1,24
1,83
2,18
1,90
2,57
2,57
2,8
2,8
2,8
2,8
2,8
2,8
2,8
2,8
0,64
0,64
0,64
0,64
0,64
0,64
0,64
0,64
12,8
16,9
13,5
21,1
24,7
19,2
27,6
28,7
2,01
1,96
1,52
2,01
1,98
1,98
2,01
2,01
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 617-2 Revised 06/26/13
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 617-3
Square Air Coil Inductors
Typical Q vs Frequency
400
Typical L vs Frequency
30
0806SQ
350
0806SQ
25
250
200
12.3 nH
150
19.4 nH
100
6.0 nH
8.9 nH
15.7 nH
Inductance (nH)
Q Factor
300
15.7 nH
15
12.3 nH
6.0 nH
0
1
10
100
1000
8.9 nH
10
5
50
0
19.4 nH
20
10000
1
10
400
13.7 nH
250
17.0 nH
200
22.2 nH
150
0807SQ
22.2 nH
Inductance (nH)
Q Factor
10000
25
6.9 nH
10.2 nH
300
20
17.0 nH
13.7 nH
15
10.2 nH
10
6.9 nH
100
5
50
0
1000
30
0807SQ
350
100
Frequency (MHz)
Frequency (MHz)
1
10
100
1000
10000
0
1
Frequency (MHz)
0908SQ
10
100
1000
10000
Frequency (MHz)
0908SQ
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 617-2 Revised 06/26/13
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.