EMCORE 2808R

2808 110 Channel CATV Optical Receiver
DATASHEET | JULY 2013
Features
Wide Bandwidth of 40 to 860 MHz
Accommodates Up to 110 Channels on
All Models
Provides Excellent Picture Quality with a
CNR up to 54.5 dB, CSO of -63 dBc,
and CTB of -66 dBc
RF Output Up to +28 dBmV Allows a
Greater Number of Drops or Splits
Wide Optical Input Range of -8 dBm to
+4.5 dBm Permits the Use of a Lower
Power Transmitter, Reducing System
Cost
Built-in, Universal AC Power Supply
Frees System User from Bulky WallMount AC Adapters
FIBER OPTICS
The 2808 110 Channel VSB/AM Optical Receiver provides CATV distribution headend
operators with an extensive array of features that offer a low-cost solution to increase
system performance. The receiver provides an RF output of +28 dBmV allowing multiple
RF splits without the use of an external RF amplifier. The 2808 is equipped with a manual
gain control that allows the user to adjust the RF output level for optimum performance.
Additionally, the receiver’s ability to operate over a wide optical input range of -8 to +4.5
dBm allows for a variety of system designs without degrading performance. The 2808 can
transport up to 110 CATV channels using the entire high-frequency bandwidth, or
alternatively, it can transport up to 80 channels of standard analog CATV signals while
utilizing the remaining high-frequency bandwidth to transport 30 digital QAM channels. The
receiver includes a universal AC power supply, freeing the user from a bulky wall-mount AC
adapter. The streamline design of the 2808 offers the flexibility and performance demanded
by today’s broadband professional.
77/110 Channel CATV Receiver Part Numbers
Description
Part Number
Fiber Optic Receiver, 1310/1550 nm, SC/APC Optical Connector
2808R-SFSP
Fiber Optic Receiver, 1310/1550 nm, FC/APC Optical Connector
2808R-SFAP
| REV 2013.07
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
2808 110 Channel CATV Optical Receiver
FIBER OPTICS
DATASHEET | JULY 2013
RF & Optical Characteristics
Parameter
Min
Typ
Max
Units
Optical Input Power
-8.0
0.0
+4.5
dBm
Operating Wavelength
1290
1310
1330
nm
Operating Wavelength
1530
1550
1571
nm
40
-
860
MHz
Output RF Impedance
-
75
-
Ohms
RF Output Level
-
-
+28
dBmV
RF Output Return Loss
-
16
-
dB
Back Reflection Tolerance
-
-
-50
dB
Required Fiber Bandwidth
2,000
-
-
MHz
Bandwidth
Composite Second Order (CSO)
-
-63
-
dBc
Composite Triple Beat (CTB)
-
-66
-
dBc
Carrier-to-Noise Ratio
See Graph
Carrier-to-Noise Performance
dB
System performance specifications indicated for use with 9/125 µm singlemode fiber.
Electrical Characteristics
Parameter
Min
Typ
Max
Units
-
120
240
VAC
50
60
-
Hz
-
8
-
Watts
Min
Typ
Max
Units
Weight
-
1.1
0.5
-
lbs
kg
Dimensions
-
8.45 x 2.95 x 1.12
215 x 75 x 29
-
in
mm
Min
Typ
Max
Units
0
-
+50
O
C
O
C
Power Supply Voltage
Power Supply Frequency
Power Dissipation
Physical Characteristics
Parameter
Environmental Characteristics
Parameter
Operating Temperature Range
Storage Temperature Range
Humidity (RH, non-condensing)
-20
-
+70
5
-
95
%
| REV 2013.07
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.